Sie haben gesucht nach: Zentrifugen

Supplier: Beckman Coulter

Optima™, SW 41 Ti swinging bucket rotor package. HRS Major applications: Rate-zonal and isopycnic centrifugation of viruses, rate-zonal centrifugation of RNA, Für: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, EM-90 electron microscopy rotor 600 µl, 90000 rpm, 118000 ×g. Major applications: Sedimenting particles onto filter membranes, glass cover slides, and micropscope grids. For use in Airfuge; Air driven micro-ultracentrifuges, Für: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, Type 50.2 Ti fixed angle rotor, 50000 rpm, 302000 ×g, 12×39 ml. Major applications: differential centrifugation of subcellular fractions, Für: Ultracentrifugation

Supplier: Beckman Coulter

JS-5.3 AllSpin swinging bucket (high performance) rotor and buckets. For use in Avanti J-E and J-26 XP Series centrifuges only. Includes tie-down knob.

Supplier: Beckman Coulter

The Avanti J-HC three-phase high capacity centrifuge provides a complete solution for batch bioprocessing, three-phase separation filters the materials into liquids, gases, and solids. A maximum of 9 litres can be spun at speeds of 5000 min⁻¹ and 7480 ×g for greater sample throughput. This allows processing of up to 36 liters per hour when harvesting bacteria. Enhanced operator safety is provided with disposable Harvest Line System Liners. The Avanti J-HC's Friction Reduction System (FRS) allows for quicker, quieter, and cooler runs. Features include a high-torque, energy efficient drive for the fastest acceleration and deceleration possible with gentle precision.

Supplier: Thermo Scientific

Erfüllen Sie die Anforderungen des Labors an die Blutverarbeitung mit normalem bis mittlerem Durchsatz mit dem Thermo Scientific™ HAEMAFlex™ Ausschwingrotor mit sechs Bechern mit einer Kapazität von 6×550 ml Blutbeuteln oder rüsten Sie mit demselben Bechersystem auf 8×550 ml Beutel auf mit dem Thermo Scientific™ HAEMAFlex™ Acht-Ausschwingrotor.

Supplier: Thermo Scientific

Meets protocol requirements with the flexibility to run 12 or 24 samples and finish washing in as little as 3 minutes with Thermo Scientific™ cell washer rotors.

Supplier: Thermo Fisher Scientific

Thermo Scientific™ LYNX 4000 and 6000 Superspeed Centrifuges with GreenCool technology bring enhanced sustainability to research and bioprocessing laboratories. They are equipped with a natural refrigerant (CO₂) cooling system, reducing environmental impact without compromising performance. Their lighter weight and reduced noise levels help improve the laboratory environment.

Supplier: Beckman Coulter

JA-17 fixed angle (high performance) aluminium rotor, with Biosafety lid 14×50 ml, 17000 rpm, 39800 ×g. For use in Avanti J Series and J2 Series centrifuges

Supplier: Beckman Coulter

Optima™, Bucket assembly, with caps and O-rings, set of 6, Für: Ultracentrifugation

Supplier: Beckman Coulter

JA-25.50 fixed angle (high performance) aluminium rotor, with single lock lid, 8×50 ml, 25000 rpm, 75600 ×g. For use in Avanti J Series and J2 Series centrifuges

Supplier: Beckman Coulter

Major applications: Pelleting of subcellular fractions in 5 to 30 minutes, plasmid DNA separations in 3 hours.

Supplier: Beckman Coulter

Major applications: Pelleting of subcellularfractions in 5 to 30 minutes; plasmid DNA separation in 3 hours.

Supplier: Beckman Coulter

Optima™, Type 90 Ti fixed angle titanium rotor. Major applications: Five-hour separation of plasmid DNA and rapid differential centrifugation of small particles, Für: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, Type 50.4 Ti fixed angle titanium rotor, Für: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, SW 41 Ti swinging bucket rotor, Für: Ultracentrifugation

Supplier: Beckman Coulter

MLA-50 fixed-angle aluminum rotor, major applications: Subcellular isolations

Supplier: THARMAC GmbH

Universelle Zytozentrifuge für kleine und große Volumen, entwickelt für Dünnschnitt- und Einzelschnitt-Zellpräparationen in medizinischen Applikationen in der Zytologie, Urologie, Mikrobiologie, Hämatologie, Immunozytochemie, Virologie und Onkologie.

Supplier: Beckman Coulter

TLN-100 Rotorpaket, NVT Near-Vertikalrotor, 9° Titan.

Supplier: Thermo Fisher Scientific

Sorvall™, Festwinkelrotor S58-A für 8×13,5 ml, 58000 min⁻¹, 288958×g, Für: Sorvall™ MTX und MTX plus

Supplier: Thermo Fisher Scientific

Führen Sie Bioverarbeitung oder Trennung großer Mengen mit sehr geringem Feststoffgehalt mit dem Thermo Scientific™ TCF-20 Continuous Flow Rotor durch. Rotor-Innovationen – vom Thermo Scientific™ Auto-Lock™ Rotorwechsel bis zur Thermo Scientific™ Auto-ID™ Rotor-Sofortidentifikation und Geschwindigkeitsreglern an jedem Rotordeckel – verkürzen die Einrichtungszeit und geben Ihnen die Gewissheit, dass der Rotor sicher ist.

Supplier: Beckman Coulter

Particles sediment out of the flowing stream, which then emerges from the rotor as a particle-depleted effluent. This process continues until the particle containing capacity of the rotor is reached, or until the starting material (sample) is completely processed. Thus the amount of sample that can be processed in one run is determined by the sample’s volume and concentration of particles.

Supplier: Beckman Coulter

JA-10 fixed angle (high performance) rotor for 10000 rpm operation. Includes carrying handle

Supplier: Beckman Coulter

JA-25.15 fixed angle (high performance) aluminium rotor with single locked lid, 24×15 ml, 25000 rpm, 74200×g, for Avanti J Series centrifuges (except Avanti J-E) and J2 Series centrifuges

Supplier: Beckman Coulter

Major applications: Large volume differential sedimentation (pelleting) of subcellular organelles and viruses.

Supplier: Beckman Coulter

J-LITE JLA-8.1000 fixed angle (high performance) aluminium rotor package, 6×1000 ml, 8000 rpm, 15970 ×g. Package includes JLA-8.1000 Rotor (969328, 969329); lid with removable canisters (363563, 363686) cap/closure with PC auto vent plug assembly (363680, A98812), labware kit includes: Bottle rack, spatula, bottle grip and wrench (392574). For use in Avanti J-26 XP Series and Avanti J-26S Series centrifuges

Supplier: Beckman Coulter

Optima™, A-100/18 fixed angle rotor, 6×175 µl, 95000 rpm, 149000 ×g. Major applications: Fast pelleting of very small samples. For use in Airfuge; Air driven micro ultracentrifuges, Für: Ultracentrifugation

Supplier: Beckman Coulter

JA-18.1 Fixed angle (high performance) aluminium rotor, 24×1.8 ml microcentrifuge tubes, 18000 rpm, 42100×g. Includes 24 reversible adapters, for use in Avanti J Series centrifuges ( (except Avanti J-E).

Supplier: Beckman Coulter

Optima™, NVT 65.2 titanium near-vertical rotor assembly, 65000 rpm, 416000 ×g, 16×5,1 ml. Includes: Vise (342705), Torque Wrench (858121), Torx Plug-Wrench Adapter (976959), Spinkote Lubricant (306812) and overspeed disks, 65000 rpm (330338). For use in Optima series ultracentrifuges and/or instruments classified: HRS, Für: Ultracentrifugation

Supplier: Beckman Coulter

Now you can address the challenges of a shared laboratory with the JXN 30 IVD centrifuge. With all the applications of a floor-standing centrifuge, the JXN-30 features a rotor speed of 3×10⁴ min⁻¹ and RCF greater than 100000×g. JXN 30 is compatible with an expansive library of rotors, including fixed-angle and swinging bucket options. Exceptional performance, improved BioSafety and advanced levels of networking can help master daily lab challenges and achieve the throughput needed for shared laboratories, GMP environments and networked instruments. Includes data logging and real-time run graphing functionality.