Sie haben gesucht nach: Fallschutz

Supplier: HONEYWELL SAFETY

Fall protection kit contains:

Supplier: NEW PIG

Hang the PIG® leak diverters from uneven surfaces using these adjustable hanging straps.

Supplier: 3M

3M DBI-SALA ExoFit XE200 Auffanggurt mit Rettungsschlaufen, automatischen Schnallen, zwei Größen. X-förmige Brustgurte mit zentralem D-Ring-Befestigungspunkt für optimale Position am Körper. Revolververstellung für die Rumpflänge für einen schnellen, sicheren und bequemen Sitz des Auffanggurts.

Supplier: 3M

Kreuz-Brustgurtsystem für zentralen vorderen Absturzsicherungspunkt – optimierte Position am Körper. Rotationsversteller (patentiert) für schnelles und einfaches Anlegen und Einstellen des Gurtes. Selbstverriegelnde Schnellverschlüsse sichern den Kontakt mit dem Gurtband und reduzieren so die Notwendigkeit des Nachjustierens.

Supplier: 3M

The Protecta® Comfort Belt Style Fall Arrest Harness is designed to provide reliable protection, comfort, and convenience. It now features upgraded features and a sleek, modern look.

Supplier: 3M

The Protecta® Nylon Webbing Sling Anchor features four safety seams, and measures 80 cm in length.

Supplier: 3M

Der 3M™ DBI SALA® Clip2Loop Coil Werkzeug-Haltegurt ist für raue Arbeitsumgebungen konzipiert.

Supplier: Portwest

Kit enthält Zwei-Punkt-Gurt, Karabiner, abnehmbare 12-mm-Seilklemme, 10 Meter statisches Kernmantelseil, Nylonbeutel mit Kordelzug

Supplier: 3M

Tape measure holster.

Supplier: 3M

Verankerungsverbinder wird aus qualitativ hochwertigen Materialien hergestellt, die eine hohe Haltbarkeit in den schwierigsten Umgebungen ermöglichen. Anschlagpunkte sind die heimlichen Helden der meisten Absturzsicherungssysteme. Sie werden oft übersehen, sind aber wichtige Komponenten, da sie Ihr System sicher am Anschlagpunkt befestigen. Die Wahl des Anschlagpunkts hängt von der Art der auszuführenden Arbeit ab.

Supplier: 3M

Bungee tool tether with self-locking carabiner.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: CAPITAL SAFETY

Protecta® Standard-Ganzkörper-Auffanggurt ist ein Auffanggurt mit verbesserten Eigenschaften und einem schlanken, modernen Look. Sein wasser- und schmutzresistentes Gurtmaterial hält das Sicherheitsgeschirr sauber und trocken, und die geschützten Etiketten bleiben zur einfachen und schnellen Inspektion dauerhaft lesbar.

Supplier: CAPITAL SAFETY

Protecta® fall arrest harness accessory options provide the opportunity to add extra tool carrying convenience and comfort to a harness.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: CAPITAL SAFETY

The Protecta® Screw gate carabiner is ideal in working situations where opening is occasional during the working day, as the gate can be opened by pushing it onto the anchorage point. The gate can then be manually locked once the carabiner holds the weight of the device.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: Portwest

Dieser leichte Twist-Lock-Karabiner verfügt über einen 20-mm-Schnappverschluss zum Befestigen eines Verbindungsgeräts wie eines Absturzsicherungsseils an einem Anschlagpunkt. Bruchlast: 23 kN.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: CAPITAL SAFETY

The Rollgliss R350 system provides efficient hauling, but more importantly, very controlled lowering (a finger and thumb are all that is required to hold a load). This system also allows to change the hauling ratios on the fly with quick release pulleys, allowing custom rigging for different applications and jobsites.

Supplier: CAPITAL SAFETY

Protecta® Cabloc® Vertical Lifeline System consists of an 8 mm cable which is terminated at the top by a cable ferrule and cable clamps at the bottom.

Supplier: CAPITAL SAFETY

Tripod with adjustable locking legs, safety chains, top pulley and winch bracket.

Supplier: CAPITAL SAFETY

DBI-SALA® Trigger2Trigger lanyard is an economical tethering solution for most hand tools which is most commonly used in combination with DBI-SALA® attachment points. Pull down on the trigger to open the dual-hooked connector, then release once latched to a tool.

Supplier: CAPITAL SAFETY

PROTECTA® Gear loops are a part of the fall arrest harness accessory options. They provide the opportunity to add extra tool carrying convenience to a harness.

Supplier: CAPITAL SAFETY

Spray can/water bottle holster with coil tether.

Supplier: CAPITAL SAFETY

DBI-SALA® Hook2Hook coil tether tool lanyard, coil tether features a swivel hook, making tools like screwdrivers and wrenches easier to use. It is a tethering solution specifically designed for tools weighing up to 2,3 kg. With a relaxed length of 4", and a stretched length of 62", this tool lanyard stays out of the way when not in use. An extra-thick PU coating around the coil prevents kinking and allows the coil to retain its form.

Supplier: CAPITAL SAFETY

Sling polyester webbing and stainless steel links.

Supplier: CAPITAL SAFETY

Protecta® anchorage D-ring made from 316 stainless steel; 12 mm fixing.