You searched for: Atemschutz-Systeme

Supplier: JSP

Dust and half masks commonly fail to do the job they are intended to do because of poor fitting and care by the user. Qualitative Fit Testing can be used not only as a test method to ensure wearers are properly protected, but also as a very effective way of training them in the correct way of fitting a mask.

Supplier: 3M

Diese Versaflo™ Radiant Heat Covers bestehen aus leichtem, aluminisiertem Aramidgewebe und bieten verbesserten Kopf-, Nacken- und Schulterschutz und Komfort vor Strahlungswärme. Die Überzüge sind für die Verwendung mit den Versaflo™ Helmen M-307 und M-407 ausgelegt.

Supplier: 3M

The Versaflo™ Backpack Adaptor TR-655 allows users to wear Versaflo™ Powered Air Turbo TR-600 or TR-800 unit on their back when used with Versaflo™ Backpack Harness BPK-01.

Supplier: 3M

Das AdFlo™ Atemschutzfilter- und Batterie-Set enthält den Adflo™-Filter und den Adflo™ Hochleistungs-Lithium-Ionen-Akku. Es ist für die Verwendung mit dem 3M™ Adflo™ Atemschutzgerät konzipiert.

Supplier: 3M

Diese Luft-Kühl- und Heizregler sind ideal zur individuellen Kühlung oder Erwärmung der zugeführten Luft des Anwenders bis zu 28 °C. Eine gute Wahl für Arbeiter, die zusätzlich zur Exposition mit hohen Konzentrationen an luftverschmutzenden Verunreinigungen auch hohen oder tiefen Temperaturen ausgesetzt sind.

Supplier: 3M

Die Leichthauben der 3M™ S-Serie bieten einen Kopf- und Gesichts- sowie Augenschutz gegen Flüssigkeitsspritzer und niedrige Energieeinwirkungen (Stufe F). Sie sind für Anwendungen geeignet, bei denen der gesamte Kopfaufsatz häufig ausgetauscht werden muss, z. B. bei der Herstellung von Pharmazeutika und bei Laborarbeiten. Alle Kopfteile können zusammen mit 3M Gebläse- und Druckluft-Atemschutzsystemen (z. B. Jupiter™ und Dustmaster™) eingesetzt werden.

Supplier: 3M

The Versaflo™ Cleaning and Storage Kit TR-653 is designed to assist with safely cleaning and storing the Versaflo™ Powered Air Turbo TR-600 and TR-800 Series. It comes with one inlet plug and two inlet seals, one outlet plug and two outlet seals, and one battery connector cover.

Supplier: 3M

Fit-Test-Kit für Atemschutzgeräte.

Supplier: 3M

Die Versaflo™ Stirndichtung M-154 ist eine Ersatz-Stirndichtung, die für die Verwendung mit 3M™ Versaflo™ Kopfteilen der Serien M-100 und M-200 entwickelt wurde.

Supplier: RPB SAFETY

The RPB Z-link respirator with FR chin seal, is the world's most comfortable (fully padded) and versatile industry respirator. Providing the highest respiratory protection available (TH3), the Z-Link system also provides hard hat protection, eye and face protection and hearing protection.

Supplier: RPB SAFETY

RPB C40 Climate device assembly and belt. For use with RPB's range of SAR respiratory head top, including Z-Link, T-Link, and Nova 3.

Supplier: RPB SAFETY

The RPB Z4 w/ PX5 PAPR starter kit provides everything needed to perform industrial welding and grinding tasks with the utmost in safety but also now with unmatched comfort and further reduced cost in use.

Supplier: RPB SAFETY

The RPB PX5 is a battery powered air purifying respirator fan unit which draws in contaminated air from the wearer’s immediate vicinity, passing it through internal filters, and supplying the filtered air to an approved RPB loose fitting respirator head top.

Supplier: RPB SAFETY

The RPB radex 2 outlet breathing air filter is designed to filter compressed breathing air of contaminants such as particulates down to 0,15 µm, odors, tastes, and moisture, in accordance with EN 12021 requirements.

Supplier: RPB SAFETY

The RPB GX4 gas monitor continually monitors the quality of supplied breathing air. As soon as the air is no longer of EN breathing air standard, the unit will alarm to warn the respirator wearer that air entering the respirator is no longer safe to breath.

Supplier: RPB SAFETY

The RPB Z-Link respirator with FR shoulder cape is the world's most comfortable (fully padded) and versatile Industry respirator. Providing the highest respiratory protection available (TH3) the Z-Link system also provides hard hat protection, eye and face protection and hearing protection.

Supplier: RPB SAFETY

The RPB Z-link respirator with FR face seal, is the world's most comfortable (fully padded) and versatile industry respirator. Providing the highest respiratory protection available (TH3), the Z-Link system also provides hard hat protection, eye and face protection and hearing protection.

Supplier: RPB SAFETY

The RPB radex 6 outlet breathing air filter is designed to filter compressed breathing air of contaminants such as particulates down to 0,15 µm, odors, tastes, and moisture, in accordance with EN 12021 requirements.

Supplier: RPB SAFETY

The RPB PX5 is a battery powered air purifying respirator fan unit which draws in contaminated air from the wearer's immediate vicinity, passing it through internal filters, and supplying the filtered air to an approved RPB loose fitting respirator head top.

Supplier: RPB SAFETY

RPB replacement flow control device assembly and belt. For use with RPB's range of SAR respiratory head top, including Z-Link and T-Link.

Supplier: RPB SAFETY

The RPB PX5 is a battery powered air purifying respirator fan unit which draws in contaminated air from the wearer's immediate vicinity, passing it through internal filters, and supplying the filtered air to an approved RPB loose fitting respirator head top.

Supplier: RPB SAFETY

The RPB T200 is a lightweight multi-purpose respirator designed specifically for the healthcare and life science industries, relieving workers of breathing difficulties and fatigue experienced with N95 use. Available with either a head harness or bump cap for head protection and multiple hood options, the T200 has the ability to adapt to different environments that need face protection and respiratory protection.

Supplier: RPB SAFETY

The RPB T-Link respirator is a lightweight, multi-purpose TH3 respirator designed specifically for a range of industries, including healthcare, pharmaceutical, and industrial painting and coating. The advanced cradle provides unmatched comfort for the wearer, and keeps the lens and hood mounted solidly.

Supplier: RPB SAFETY

The RPB T-Link respirator is a lightweight, multi-purpose TH3 respirator designed specifically for a range of industries, including healthcare, pharmaceutical, and industrial painting and coating. The advanced cradle provides unmatched comfort for the wearer, and keeps the lens and hood mounted solidly.

Supplier: Dräger

Ersatz-Filterset für Parat® 4700 Fluchthauben, inkl. ABEK P3 Filter und Plombe, Parat®

Supplier: Dräger

The powered air-purifying respirator (PAPR) X-plore 8000 offers a number of user friendly standard and specialised carrying systems for standard and decontamination applications. Dräger has also developed a wide range of tight- and loose-fitting headgear such as half and full-face masks, short and long hoods and helmets with visor and protective visor. Standard and enhanced flexibility hoses are available and compatibility is ensured. Modular components: A wide range of components for every application.

Supplier: Dräger

Diese kombinierte Brand- und Industriefluchthaube wurde gemeinsam mit Anwendern und im Hinblick auf eine möglichst schnelle Flucht entwickelt. Der optimierte Bedien- und Tragekomfort, das stabile Gehäuse und der geprüfte ABEK CO P3 Filter schützen mindestens 15 Minuten vor toxischen Industrie- und Brandgasen, Dämpfen und Partikeln.

Supplier: Dräger

Diese kombinierte Brand- und Industriefluchthaube wurde gemeinsam mit Anwendern und im Hinblick auf eine möglichst schnelle Flucht entwickelt. Der optimierte Bedien- und Tragekomfort, das stabile Gehäuse und der geprüfte ABEK P3 Filter schützen mindestens 15 Minuten vor toxischen Industriegasen, Dämpfen und Partikeln.

Supplier: THI Total Healthcare Innovation GmbH

Steriles System bestehend aus Helm und Kapuze mit aktiver Luftfilterung zum Schutz des Reinraums und für hohen Anwenderkomfort.

Supplier: HONEYWELL SAFETY

The Compact Air® 200 powered air supply system is designed to provide respiratory protection against gases, vapour and particles depending on the type of filter element used.