Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Luer-Schnelladapter ermöglichen die Anpassung von Luer-Verbindungen innen bzw. außen an eine Schraubverbindung. Entspricht den ISO-Anforderungen für Konfiguration und Leistung der medizinischen Luer-Verjüngung (45 psi/3,1 bar).

Supplier: UPCHURCH SCIENTIFIC

PEEK oder PCTFE

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE oder PEEK. Die Schlaucholiveneinsätze der drehbaren Schlaucholivenadapter drehen frei von der Gewindemutter, um zu verhindern, dass sich die Schläuche während der Installation verdrehen.

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Supplier: Lenz Laborglas GmbH & CO.KG

Connectors, made of PBT, red with integrated silicone (VMQ)-PTFE sealing.

Supplier: VICI JOUR RESEARCH

Ferrule, SS bushing, PEEK, For tubing ext.Ø: 1/32"

Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC

Diese M6-Adapterbuchsen bestehen aus PEEK, EFTE oder PCTFE.

Supplier: UPCHURCH SCIENTIFIC

Diese Niederdruckverbindungen bestehen aus PEEK, ETFE, Delrin oder PP.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-333N, fitting and sleeves, long, PEEK natural/ETFE natural, headless knurl, 10-32 coned port, for 1/16" OD tubing, 4000 psi

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: SHIMADZU

High-Performance fittings for liquid chromatography simple, hand-tightened connections for all LC applications achieve zero dead volume with Titanium and PEEK technology high-pressure, reusable connections for HPLC and UHPLC.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: UPCHURCH SCIENTIFIC

Diese PEEK Adapter dienen der Verbindung mit weiblichen ¹/₈"- und ¹/₄"-NPT(National Pipe Thread)-Anschlüssen.

Supplier: CADENCE SCIENCE

Luer auf geschlossenes Ende, Gewinde 1/16 - 3/32", Messing

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-309, plug for 1/4-28 flat bottom ports, standard knurl, Delrin®*, Schwarz

Supplier: KLS Martin Group

Couplings, tubing, Faucet coupling for water jet pump 1/2", Gewinde: 12,7 mm

Supplier: SEMADENI

PP, gray.

Supplier: VICI JOUR RESEARCH

These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).

Supplier: SEMADENI

Oliven, Y-förmig, aus PP, natürliche Farbe.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-124H, fitting, micro headless knurl, PEEK blue, 6-32 coned port, for 360 μm OD tubing, 5000 psi, PEEK

Supplier: TOSOH Bioscience

Connection pipe set, J type

Supplier: VICI JOUR RESEARCH

VICI Edelstahl-Kopplungsteile dienen der Verbindung von zwei Leitungen mit 1/16" A-Ø oder einer Leitung mit 1/8" A-Ø. Sie werden in Präzisionsarbeit hergestellt, wobei besonders auf die Konzentrizität der Bohrung als auch die Vergütung der Oberflächen Wert gelegt wird, damit eine absolut dichte Verbindung erreicht wird. Diese Kopplungsteile besitzen Innengewinde, die für die allermeisten Anwendungen empfohlen werden. Innengewinde sorgen für belastbarere Verbindungen. Die Kopplungsteile weisen sehr kleine Totvolumina auf.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.