67 Résultats pour : « WaterSaver Faucet »

Supplier: WaterSaver Faucet

Constructed of chrome-plated brass, these faucet-mount units convert any laboratory faucet into an emergency eyewash station without special plumbing or interference with normal faucet operation.

Supplier: WaterSaver Faucet

Deck-mounted mixing faucets are made of chrome-plated forged brass and are provided with an aerator, four-arm handles, and 1 cm (³/₈") diameter copper tubes on inlets.

Supplier: WaterSaver Faucet

Features a 9.5mm male inlet.

Supplier: WaterSaver Faucet

White, epoxy-coated, single straight pattern laboratory needle valve.

Supplier: WaterSaver Faucet

Emergency showers provide a spray pattern 50.8 cm (20") in Ø at 152.4 cm (60") above the floor.

Supplier: WaterSaver Faucet

Straight pattern laboratory steam valve with removable angle serrated hose end.

Supplier: WaterSaver Faucet

Point-of-use regulation of high purity gases for installation on fume hoods. Used for compressed air and inert high purity gases, including nitrogen, helium, argon and oxygen.

Supplier: WaterSaver Faucet

Deck-mounted pure water fixture has chrome-plated forged brass external construction and all-polypropylene internal construction.

Supplier: WaterSaver Faucet

White, epoxy-coated, single straight pattern laboratory needle valve.

Supplier: WaterSaver Faucet

Since isotope hoods do not have interior access panels, they require a front load fitting that can be accessed from outside the hood

Supplier: WaterSaver Faucet

Panel-mounted mixing faucets are made of white epoxy/polyester hybrid powder-coated cast brass

Supplier: WaterSaver Faucet

This coupling is designed for use with all standard goosenecks and it replaces washer in a fixed gooseneck faucet, converting it to a swing faucet.

Supplier: WaterSaver Faucet

For installation on vertical or horizontal surfaces (such as pipe chases and service carriers) where there is access behind surface during installation.

Supplier: WaterSaver Faucet

Deck-mounted pure water faucets are made of white epoxy/powder-coated brass.

Supplier: WaterSaver Faucet

Dual-head units act as a fixed eyewash or removable drench hose, providing a soft, wide stream of water that quickly and gently rinses away contaminants.

Supplier: WaterSaver Faucet

Aluminum rod socket with tapered bore and radiused top for surface mounting on countertop.

Supplier: WaterSaver Faucet

Deck- and panel-mounted pre-rinse units for hot and cold water feature a brass body with polished chrome-plated finish and forged brass four-arm handles with color-coded index disks.

Supplier: WaterSaver Faucet

Deck-mounted single faucets are made of white epoxy/polyester hybrid powder-coated forged brass.

Supplier: WaterSaver Faucet

All valves and inlet fittings are machined from forged brass and are provided with a serrated hose end

Supplier: WaterSaver Faucet

Deck-mounted mixing faucets are made of chrome-plated forged brass and provided with a serrated hose end, four-arm handles, and 1 cm (³/₈") diameter copper tubes on inlets.

Supplier: WaterSaver Faucet

Curb- or panel-mounted chrome-plated water fitting consists of a single outlet turret and a straight water stop.

Supplier: WaterSaver Faucet

Identifies hot water faucets.

Supplier: WaterSaver Faucet

Vertical rods are machined with the top end rounded and the bottom end tapered to fit in to a rod socket.

Supplier: WaterSaver Faucet

Featuring the GS-Plus 'Gentle Spray' heads, these eyewashes deliver a soft, wide stream of water to quickly and gently rinse contaminants away.

Supplier: WaterSaver Faucet

Plugs have an internal shut-off valve that closes when the valve is disengaged.

Supplier: WaterSaver Faucet

The quick connect keying system is based upon the inner and outer diameters of the sleeves on the body and plug

Supplier: WaterSaver Faucet

Pressure regulator fixture used in regulation of high purity gases including nitrogen, helium argon and oxygen.

Supplier: WaterSaver Faucet

Deck-mounted mixing faucets are made of chrome-plated forged brass and are provided with a serrated hose end, wrist blade handles, and
1 cm (³/₈") diameter copper tubes on inlets.

Supplier: WaterSaver Faucet

The boxes are available in brushed satin finish or wrinkled black epoxy finish. They are furnished with 3-wire grounding receptacle(s) rated for 125 V, 20 A, stainless steel faceplates, grounding screw(s) and 1.9 cm (³/₄") mounting shank and locknut.

Supplier: WaterSaver Faucet

Deck-mounted, rigid 15.2 cm (6") gooseneck faucet comes with floor-mounted, foot-operated mixing valve for hot and cold water.