Résultats des tests de spécification

• For Laboratory,Research,or Manufacturing Use:
  —
• ACS - Assay (sum of 5 isomers, total hexanes plus methylcyclopentane)(by GC):
  ≥ 99.5 %
• ACS - Assay (as n-hexane) (by GC, corrected for water):
  ≥ 95.0 %
• ACS - Color (APHA):
  ≤ 10
• ACS - Residue after Evaporation:
  ≤ 0.0001 %
• ACS - Sulfur Compounds (as S):
  ≤ 0.005 %
• ACS - Thiophene:
  Passes Test
• ACS - Water (H₂O)(by Karl Fischer titrn):
  ≤ 0.01 %
• ACS - Water-Soluble Titrable Acid (meq/g):
  ≤ 0.0003
• Ultraviolet Absorbance (1.00-cm cell vs. water) - 195 nm:
  ≤ 1.00
• Ultraviolet Absorbance (1.00-cm cell vs. water) - 210 nm:
  ≤ 0.20
• Ultraviolet Absorbance (1.00-cm cell vs. water) - 220 nm:
  ≤ 0.07
• Ultraviolet Absorbance (1.00-cm cell vs. water) - 230 nm:
  ≤ 0.05
• Ultraviolet Absorbance (1.00-cm cell vs. water) - 240 nm:
  ≤ 0.04
• Ultraviolet Absorbance (1.00-cm cell vs. water) - 250 nm:
  ≤ 0.02
• Ultraviolet Absorbance (1.00-cm cell vs. water) - 254 nm:
  ≤ 0.005
• Ultraviolet Absorbance (1.00-cm cell vs. water) - 280 - 400 nm:
  ≤ 0.005
• Fluorescence Trace Impurities, measured as Quinine Base - at 450 nm Emission:
  ≤ 0.3 ppb
• Fluorescence Trace Impurities, measured as Quinine Base - at Emission Maximum for Impurities:
  ≤ 1.0 ppb
• ECD Sensitive Impurities (as Heptachl or Epoxide) Single Peak (ng/L):
  ≤ 10 ppb
• FID Sensitive Impurities (as 2-Octano l) Single Peak (µg/L):
  ≤ 5 ppb
• FID - Sum of the Peaks (µg/L):
  ≤ 10
• ECD-Sensitive Impurities (as Ethylene Dibromide) - Single Impurity Peak (ng/mL):
  ≤ 5
• Neat Solvent Front Characterization - Largest Peak, 0-0.4 x RT (ng/mL):
  —