BEEM™ Specimen Block Storage System 2000, Electron Microscopy Sciences

The system includes four Blocklock modules which can be fixed to mounting panels for 3-ring binders or can be stored into Blocklock storage boxes.

• Modules permits blocks size "00", size "3", and BEEM® flat embedment to be indexed
• Modules feature an adhesive backing which when exposed permits it to be permanently mounted on any grease-free surface
• Combined under one cover along with any associated data sheets can be stored upright in 3-ring binders
• A 1-inch binder will accommodate two covered mounting panels, and 1.5-inch binder accommodates three panels
• Heavy-duty, two tone plastic boxes are supplied with indexed, translucent labels, which can be applied to the top or bottom of the box
• System is infinitely expandable to high or low volume block storage#
• Capsule Blocklock Storage Modules allows blocks to snap into cavities specially designed to retain them so they cannot be inadvertently dislodged; number and letter identify each cavity.

Model 2006 measures L x W x H: 74 x 50 x 8 mm (2 ⁷/₈ x 2 x ¹/₄"). Accommodates 12 size "00" blocks
Model 2007 measures L x W x H: 117 x 90 x 8 mm (4 ⁵/₈ x 3 ¹/₂ x ⁵/₁₆"). Accommodates 40 size "00" blocks
Model 2008 measures L x W x H: 74 x 50 x 6 mm (2 ⁷/₈ x 2 x ¹/₄". Accommodates 20 size"3" capsule blocks
Model 2009 Measures 74 x 50 x 8 mm (2 ⁷/₈ x 2 x ¹/₄"). Accommodates 20 BEEM® flat blocks

BEEM® Blocklock Storage Boxes;
Box #69906-B and #69908-B are the same size and are two-tone blue/clear. Overall measurement: 78 x 54 x 13 mm (3 x 2 ¹/₈ x ¹/₂").
Box #69957-B is two-tone blue/clear. Overall measurement: 120 x 94 x 13 mm (4 ³/₄ x 3 ³/₄ x ¹/2")
Box #69959-B is two-tone black/clear. Overall measurements are the same as #69956-B and #69958-B

BEEM® Mounting Panel:
measures: 270 x 190 x 12 mm (10 ⁵/₈ x 7 ¹/₂ x ³/₈"). The overall measurement is 290 x 225 x 22 mm (11 ³/₈ x 8 ³/₄ x ⁹/₁₆").

Ordering information: Blocklocks, binders and storage boxes are sold separately.

Caution: NOTE: Due to the rectangular shape of a BEEM® flat embedment; it must be inserted into the cavity in a Blocklock module as follows: Introduce the front of the block at a slight angle into the rear of the cavity and gently push it forward until it nests in the recess.