Supplier: S17 SCIENCE LLC.

The extender is used to make an air-tight connection between a syringe and plastic, vinyl, or rubber tubing.

Supplier: Restek

Made of clear anodized aluminum and high-quality stainless steel. One-piece design for ease of installation and removal.

Supplier: ANDON SPECIALTIES INC.

Ideal for extremely corrosive materials—PFA will not rouge or pit.

Supplier: Restek

Silicone or glass capillary column caps can be attached to the column in seconds to form an airtight seal.

Supplier: Dynalon

Adapters allow for connecting different diameter tubing.

Supplier: Antyila Scientific

For liquid-tight connection of semi-rigid tubing (¹/₁₆" to ³/₁₆" O.D.) to ¹/₄" NPT ports.

Supplier: Restek

Capillary columns are easier to install due to the nut protruding farther from the insulated injection port chamber.

Supplier: Restek

For use with split/splitless injectors on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL.

Supplier: Chemglass

Adapter fits into the headplate and has two connections that are 4 mm OØ to fit precision tubing size 16. Inside the reactor, the 4 mm tubes are 1.25" long.

Supplier: Thermo Fisher Scientific

Nalgene Replacement coupling inserts support one handed connection and disconnection when applied to mating couple bodies

Supplier: Chemglass

Male Luer lock with needleless injection site and swabable polycarbonate, silicone with lach samplers for bioreactors.

Supplier: BIOPTECHS INC.

The FCS2® Cooling Adapter is an O-Ring sealed window that circulates an isolated cooled fluid over the upper glass element (Microaqueduct slide) to cool the specimen to desired temperature

Supplier: Optimize

The EXP Fitting System is the premier adjustable nut and ferrule compression fitting for extreme high-pressure connections between ¹/₃₂ or ¹/₁₆" tubing and any 6-32, 6-40 or 10-32 port.

Supplier: Restek

Fluid resistor technology eliminates adjustments to capillary tubing for optimizing split ratio. Wide range of interchangeable resistors available.

Supplier: BIOPTECHS INC.

The Stable "Z"® Nikon Stage Adapter is a 108 mm round glass plate with an electronically heated metal plate in its center to fit a Nikon microscope stage where biological specimens are placed for observation.

Supplier: Upchurch Scientific

Upchurch Scientific® Quick Connect Luer Adapters by IDEX Health & Science adapt luers to 1/4-28, 10-32, 5/16-24, or M6 threaded ports.

Supplier: Trajan Scientific and Medical

Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. SGE brings technology and chromatography expertise to improve your chromatography. SGE manufactures an array of connection types for GC use. Poorly defined or selected connections can lead to an increase in dead volume, leaks from cycled temperatures and mismatched tubing sizes.

Supplier: Edwards

Elbow, NW10, Aluminium

Supplier: Colder Products

NSH Series couplings are general purpose versions of our pressure-balanced, non-spill, ChemQuik® CQG couplings. Their non-spill design virtually eliminates spills, minimizes downtime and enhances operator safety in a very low-cost package.

Supplier: Edwards

Used for connecting flexible vacuum tubing to pumping systems

Supplier: Chemglass

Universal vent port assembly is constructed of 316 L electro polished stainless steel. These port assemblies fit all types of spinner flasks, media bottles and vessels. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.

Supplier: Optimize

Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.

Supplier: Optimize

OPTI-LOK LP Fittings are an excellent choice for making low-pressure connections into ¹/₄-28 ports. Connections to flat-bottomed ports can be made using OPTI-LOK flat-bottomed ferrules for ¹/₁₆ or ¹/₈" tubing without the need for pre-flanged tubing ends. OPTI-LOK LP Fittings are precision machined to deliver leak-free, zero-dead-volume connections every time. We also offer ¹/₄-28 unions in various through-hole sizes for joining flat-bottom fittings.

Supplier: Peeke Scientific

Tubing int.Ø: ½"

Supplier: Peeke Scientific

Reusable vaplock filter connector 90° for polypropylene/EPDM justrite quick disconnect.

Supplier: SANISURE, INC. LO

These compliant, biocompatible fittings provide assurance, integrity, and cost-effective solutions.

Supplier: SANISURE, INC. LO

These compliant, biocompatible fittings provide assurance, integrity, and cost-effective solutions.