Vous avez recherché : Fittings and Connectors

Supplier: Restek

For use with split/splitless injectors on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL.

Supplier: Restek

Silicone or glass capillary column caps can be attached to the column in seconds to form an airtight seal.

Supplier: Ohio Valley

Features linear tapers of a minimum angle, 1:1 split ratio, narrow angle between output legs for less column strain and low dead-volume

Supplier: Restek

Use micropacked inlet conversion kits to convert capillary GC split/splitless inlets for use with ¹/₁₆" OD micropacked columns.

Supplier: BIOPTECHS INC.

The Stable "Z"® Nikon Stage Adapter is a 108 mm round glass plate with an electronically heated metal plate in its center to fit a Nikon microscope stage where biological specimens are placed for observation.

Supplier: BIOPTECHS INC.

The FCS2® Cooling Adapter is an O-Ring sealed window that circulates an isolated cooled fluid over the upper glass element (Microaqueduct slide) to cool the specimen to desired temperature

Supplier: Thermo Fisher Scientific

Nalgene Replacement coupling inserts support one handed connection and disconnection when applied to mating couple bodies

Supplier: Restek

Fluid resistor technology eliminates adjustments to capillary tubing for optimizing split ratio. Wide range of interchangeable resistors available.

Supplier: Trajan Scientific and Medical

Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. SGE brings technology and chromatography expertise to improve your chromatography. SGE manufactures an array of connection types for GC use. Poorly defined or selected connections can lead to an increase in dead volume, leaks from cycled temperatures and mismatched tubing sizes.

Supplier: Chemglass

Universal vent port assembly is constructed of 316 L electro polished stainless steel. These port assemblies fit all types of spinner flasks, media bottles and vessels. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.

Supplier: Optimize

OPTI-LOK LP Fittings are an excellent choice for making low-pressure connections into ¹/₄-28 ports. Connections to flat-bottomed ports can be made using OPTI-LOK flat-bottomed ferrules for ¹/₁₆ or ¹/₈" tubing without the need for pre-flanged tubing ends. OPTI-LOK LP Fittings are precision machined to deliver leak-free, zero-dead-volume connections every time. We also offer ¹/₄-28 unions in various through-hole sizes for joining flat-bottom fittings.

Supplier: Optimize

Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.

Supplier: Peeke Scientific

Reusable vaplock filter connector 90° for polypropylene/EPDM justrite quick disconnect.

Supplier: Peeke Scientific

Tubing int.Ø: ⁵⁄₁₆"

Supplier: FIREFLYSCI, INC.

A pair of M6 threaded connectors for use in Type 601, 602, and 606 tablet dissolution cells. The connector holds the PTFE tube firmly in place to seal it tightly against the quartz cell.

Supplier: ANALYTICAL SALES & SERVICE MS

Fits GL45 thread safety caps, GL38 bottle and Canary-Safe™ caps.

Supplier: IDEAL VACUUM PRODUCTS MS

These adapter rubber hose nozzles are KF-25 to rubber hose and fit a 12 mm ID rubber hose.

Supplier: CP Lab Safety

ECO Funnels can be equipped with HPLC fittings, allowing the operator to connect HPLC waste lines directly to the funnel. Installation is free of charge. To order HPLC attached to your ECO Funnel(s), please add the desired funnels and fittings to your cart. We can install up to 6 HPLC fittings per 4" funnel and 8 fittings per 8" funnel. Measure the Int.Ø of your tubing to determine the size of Luer Barb fitting that you need.

Supplier: SANISURE, INC. LO

These compliant, biocompatible fittings provide assurance, integrity, and cost-effective solutions.

Supplier: SANISURE, INC. LO

These compliant, biocompatible fittings provide assurance, integrity, and cost-effective solutions.