Vous avez recherché : Cleanroom Wipes

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA (polyester/cellulose) pouch wipes are sterile low particulate, non-woven polyester/cellulose wipes impregnated with 70% v/v Isopropyl alcohol blended with Water for Injection (WFI).

Supplier: Contec

Anticon® White Magic™ Wipes are made from 100% continuous filament polyester with an interlock knit construction. This wipe exhibits low particle and fiber counts and provides ultra-clean wiping for critical applications.

Supplier: Contec

Premoistened knitted polyester wipers and nonwoven polypropylene wipers are saturated with various solvent blends.

Supplier: Contec

Microfiber wipes presaturated with 70% IPA and 30% DI water.

Supplier: Contec

PROSAT® Sterile Delta™ Wipes are made from a 100% nonwoven polyester fibers which are hydroentangled together using no binders or additives. The resulting fabric is extremely soft, clean, and strong.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA are sterile, knitted 100% polyester wipes impregnated with 0.2 micronfiltered IPA blended with deionized water.

Supplier: Contec

Amplitude™ Zeta™ wipes are a 5-ply, thermally bonded wipe which is comprised of a layer of cellulose sealed between two layers of meltblown polypropylene. This creates a material which is very absorbent and has a high level of cleanliness.

Supplier: Micronova

Presaturated wiper provides lubricant in controlled applications.

Supplier: Contec

Premoistened polyester wipes are designed for general-purpose cleaning in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments.

Supplier: Contec

Amplitude™ Lambda™ Wipes are a hydroentangled blend of 58% cellulose and 42% polyester. The Lambda™ wipe is highly sorbent, has excellent durability, and good cleanliness.

Supplier: Contec

Amplitude™ Theta™ Wipes are made from a lightweight hydroentangled cellulose/polyester, which creates an economical absorbent wipe ideal for general cleaning applications.

Supplier: Contec

Quiltec® I Wipes offer the highest sorptive capacity of any sealed edge wipe available. They are manufactured using two layers of knitted polyester fabric that are laminated together to form a stronger, more adsorbent wipe. Additional fluid is captured within the quilted pockets between the fabric layers, increasing the sorbent capacity. Quiltec® I have more than twice the adsorbent capacity of a single-layer wipe.

Supplier: Contec

MicroSilk™ II Wipes are made with fabric densely knitted by continuous microdenier filament.

Supplier: Contec

Presaturated with IPA/DI water or 100% IPA.

Supplier: Contec

100% interlock knit, standard weight textured polyester presaturated with 70% USP grade IPA and 30% DI water.

Supplier: Contec

The EcoCloth™ wipe has been engineered to provide greater thickness in a lighter weight material. Amplitude™ EcoCloth™ is a hydroentangled cellulose/polyester fabric with additional loft. It is lightweight but has excellent sorbency which exceeds comparable standard cellulose/polyester wipes.

Supplier: Berkshire

SatPax® MicroSeal®-VP is an ultrasonically sealed edge cleanroom laundered wiper recommended for ISO Class 3 and above environments.

Supplier: Contec

Amplitude™ Optic wipes are 100% nonwoven cellulose. The wipe consists of long staple fibers which are wet laid in a paper making process to form an extremely clean sheet. It features very low levels of extractables and only moderate particle generation. The wipe has a non-abrasive surface texture. The wipes are both absorbent and optical grade.

Supplier: Contec

The Amplitude™ standard weight knitted wipes feature a soft, textured surface for effective cleaning without scratching. The wipe is laser cut, which seals the fibers at the edges.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ Low residue peroxide pouch wipes are ideal for routine or rotational use when cleaning and residue removal is required.

Supplier: Contec

SATWipes® SWNW0013 series wipes consist of a roll of (700) 7×9" saturated wipes which are dispensed through a center-pull container.

Supplier: Contec

Meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. PROSAT® presaturated wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: Contec

PROSAT® Sigma™ wipes consist of cellulose/polyester hydroentangled and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. They are ideal for use in life science applications.

Supplier: Contec

Polywipe Light Wipes are unlaundered standard weight interlock knit polyester wipes with knife-cut edges that can be used in less critical applications.

Supplier: Contec

StatZorb® Wipes are made from polyester fabric with a conductive fiber knitted in a specially designed grid pattern that minimizes 'hot spots'. The antistatic properties are uniform on both sides of the wipe. The surface resistivity is 4.3×107. The static decay time is less than 1.5 seconds.

Supplier: Contec

Polynit heatseal low endotoxin wipes are manufactured from high quality 100% knitted polyester fabric with sealed edges and produce low levels of particles and fibers. The polyester fabric offers the widest range of solvent compatibility. The wipes have a guaranteed endotoxin level of <1 EU/wipe and are validated sterile to 10⁻⁶ Sterility Assurance Level, making them ideal for use in product contact areas.

Supplier: Berkshire

MicroSeal® NW antistatic is a sealed edge knitted polyester wiper. A conductive fiber is knitted into the material to provide increased control over static.

Supplier: Contec

PROSAT® meltblown polypropylene wipes offer exceptional cleanliness suitable for use in a wide variety of critical environments. Saturated with a solution of 70% USP grade isopropanol and 30% deionized water, the wipes provide a uniform and consistent application of the solution to the surface. PROSAT® PS-911 and PROSAT® PS-850 wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: Contec

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric unraveling creating an even more durable fabric with strong edges.

Supplier: Contec

Anticon® Gold StandardWeight™ wipes are made from 100% continuous filament polyester with a double-knit, no-run, interlock construction. The proprietary sealed edges reduce the amount of fibers released from the wipe.