You searched for: Tetrahydrofuran
Tetrahydrofuran ≥99% stabilized ACS, VWR Chemicals BDH®
Supplier: VWR International
Meets ACS specifications for general use. Contains 250 to 400 ppm BHT as a preservative.
Expand 2 Items
Tetrahydrofuran stabilized, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®
Supplier: VWR International
Tétrahydrofuranne stabilised, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®
Expand 1 Items
Tetrahydrofuran, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®
Supplier: VWR International
Not stabilized.
Expand 2 Items
Tetrahydrofuran ≥99.8% (by GC, corrected for water content) contains no preservatives, BAKER ANALYZED® HPLC for HPLC, UHPLC, for spectrophotometry, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
BAKER ANALYZED™ HPLC Reagent—High purity solvents for use in analytical and preparative separations. All are optimized for all of your Liquid Chromatography applications, including HPLC, UHPLC, gel permeation chromatography and UV-spectrophotometric analysis.
Expand 2 Items
Tetrahydrofuran ≥99.0% stabilized, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Tétrahydrofuranne ≥99.0% stabilised, J.T.Baker®
Expand 1 Items
Tetrahydrofuran ≥99.8% contains no preservatives, ChromAR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
ChromAR—Solvents that meet ACS specifications and are suitable for liquid chromatography and UV-spectrophotometry.
Expand 2 Items
Tetrahydrofuran ≥99.5% (by GC, corrected for water content) stabilized, BAKER ANALYZED® ACS, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
The quality of many BAKER ANALYZED™ Reagents meets or exceeds the requirements set forth by the American Chemical Society (ACS). These solvents are essential for any chemical stockroom.
Expand 5 Items
Tétrahydrofuranne ≥99.8%, AR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Tétrahydrofuranne ≥99.8%, AR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Expand 1 Items
Tetrahydrofuran ≥99.0% (by GC, corrected for water content) stabilized, AR® ACS, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Tétrahydrofuranne ≥99% (by GC, corrected for water content) stabilised, AR® ACS, Macron Fine Chemicals™
Expand 4 Items
Tetrahydrofuran ≥99.9% (by GC) unstabilised, OmniSolv®, Supelco®
Supplier: MilliporeSigma
Meets Reagent Specifications for testing USP/NF monographs.
Expand 4 Items
Tetrahydrofuran ≥99% stabilized, Reagent Grade, Supelco®
Supplier: MilliporeSigma
Stabilized with 0.025% BHT (butylated hydroxytoluene).
Expand 1 Items
Tetrahydrofuran, EMPARTA® ACS for analysis, Supelco®
Supplier: MilliporeSigma
Expand 2 Items
Tetrahydrofuran ≥99.8% (by GC), EMSURE® for analysis, Supelco®
Supplier: MilliporeSigma
Tetrahydrofuran, Grade:ACS,Reag. Ph Eur, CAS number:109-99-9, Synonyms:THF, Tetramethylene oxide, Oxolane, Butylene oxide, Application:for analysis EMSUR
Expand 4 Items
Tetrahydrofuran ≥99.5% (by GC), GR ACS, Supelco®
Supplier: MilliporeSigma
Meets ACS Specifications
Expand 5 Items
Tetrahydrofuran, OmniSolv®, non-UV, Supelco®
Supplier: MilliporeSigma
Stabilized with 250ppm BHT (butylated hydroxytoluene; 2,6-di-tert-butyl-p-cresol). For chromatography. Can be used for HPLC non-UV applications using refractive index and visible wavelength detectors.
Expand 1 Items
Tetrahydrofuran, anhydrous (max. 0.005% H₂O), Seccosolv®, Supelco®
Supplier: MilliporeSigma
These reagents are produced using specially selected distillation methods that ensure consistently high dryness and batch-to-batch consistency. To protect the quality of these products even better from potential contaminants, a septum seal cap provides multiple layers of protection to keep solvents in flawless condition before, during, and after removal.
Expand 1 Items
Tetrahydrofuran, Uvasol® for spectroscopy, Supelco®
Supplier: MilliporeSigma
Accurate analytic results in UV/VIS and infrared spectroscopy depend on the use of very pure solvents for sample preparation. The Uvasol® solvents range has been specially designed for spectroscopy and other applications requiring solvents of the highest spectral purity. The refinement process allows a greater degree of security in applications and avoids misinterpretation of analytical results caused by traces of UV, IR and fluorescence contamination. Uvasol® solvents offer best UV transmittance. In all specifications the minimum transmittance for 5 typical wavelengths are identified. Furthermore the transmittance is specified in accordance with Reag. Ph Eur and ACS.
Expand 2 Items
Tetrahydrofuran, anhydrous ≥99.9%, DriSolv®, Supelco®
Supplier: MilliporeSigma
Clear and free from particulates. Suitable for use in organic synthesis and other anhydrous solvent applications. UV cutoff at 212nm.
Elbow adapter with septum cap (EM-692004-2) allows for the removal of solvent under nitrogen atmosphere. Replacement septum (EM-692004S-2) for use with elbow adapter minimizes air and moisture intrusion once the primary septum is punctured. Drying tube (EM-692010-2) filled with t.h.e.* desiccant indicating silica gel removes solvent under a dry-air atmosphere. Large plug (EM-692012-2) is a replacement plug for bottle top.
Expand 1 Items
Tetrahydrofuran, LiChrosolv® for liquid chromatography, Supelco®
Supplier: MilliporeSigma
Offering a high degree of UV transmittance, low particle count, low acidity and alkalinity, and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. They are produced from specially selected raw materials, and undergo a number of purification steps prior to final packaging. Since separations are normally carried out under gradient conditions in analytical HPLC, Merck Millipore offer solvents in ’gradient grade’ as well as ’isocratic grade’. This enables you to minimise the gradient effect of the solvent involved.
Expand 1 Items
Tetrahydrofuran, anhydrous ≥99.8%, DriSolv®, Supelco®
Supplier: MilliporeSigma
Clear and free from particulates. Stabilized with 25ppm BHT. Suitable for use in organic synthesis and other anhydrous solvent applications. Elbow adapter with septum cap (EM-692004-2) allows for the removal of solvent under nitrogen atmosphere. Replacement septum (EM-692004S-2), for use with elbow adapter, minimizes air and moisture intrusion once the primary septum is punctured. Drying tube (EM-692010-2) filled with t.h.e.* desiccant indicating silica gel removes solvent under a dry-air atmosphere. Large plug (EM-692012-2) is a replacement plug for bottle top.
Expand 2 Items
Tetrahydrofuran ≥99.5% stabilized
Supplier: TCI America
(stabilized with BHT)
CAS Number: 109-99-9
MDL Number: MFCD00005356
Molecular Formula: C4H8O
Molecular Weight: 72.11
Purity/Analysis Method: >99.5% (GC)
Form: Clear Liquid
Color: Colorless
Boiling point (°C): 65
Melting point (°C): -108
Flash Point (°C): -15
Specific Gravity (20/20): 0.89
Expand 1 Items
Tetrahydrofuran ≥99.9% contains no preservatives, B&J Brand™, gradient grade for HPLC, for pesticide residue analysis, for spectrophotometry, Burdick & Jackson™
Supplier: Honeywell Research Chemicals
For HPLC, liquid and gas chromatography, pesticide residue analysis, spectophotometry, organic synthesis and combinatorial chemistry.
Expand 4 Items
Tetrahydrofuran ≥99.7% unstabilised for HPLC, for UV spectrophotometry
Supplier: Thermo Scientific Chemicals
MDL: MFCD00005356 Beilstein Registry No.: 102391 Notes: Filtered through 0.2µ filters. Suitable for spectophotometry, chromatography. Fieser: 1,1140 2,398 3,278 5,649 6,570
Expand 1 Items
Tetrahydrofuran ≥99.9% stabilized, BioSyn™ for biosynthesis, for applications requiring low water content, Burdick & Jackson™
Supplier: Burdick & Jackson
BioSyn« products are ideal for DNA, RNA and oligonucleotide synthesis. All solvents and regents are filtered (0.2-micron) and tested for oxidation reage.
Expand 2 Items
Tetrahydrofuran, anhydrous ≥99.8% stabilized, AcroSeal™
Supplier: Thermo Scientific Chemicals
AcroSeal™ septum bottled solvent.
Expand 3 Items
Tetrahydrofuran ≥99.7% unstabilised, AcroSeal™, Spectrophotometric Grade
Supplier: Thermo Scientific Chemicals
AcroSeal™ septum bottled solvent.
Expand 3 Items
Tetrahydrofuran ≥99.9% (by GC) stabilized, B&J Brand™ for GPC (gel permeation chromatography), for gas chromatography, non-spectrophotometric grade, Burdick & Jackson™
Supplier: Burdick & Jackson
For GC and GPC. Non-UV grade. Packed under nitrogen. Preserved with 250ppm BHT.
Expand 2 Items
Tetrahydrofuran, anhydrous ≥99.8%, AcroSeal™ BHT-free, over molecular sieves
Supplier: Thermo Scientific Chemicals
AcroSeal™ septum bottled solvent
Expand 2 Items
Tetrahydrofuran ≥99.0% stabilized ACS for organic synthesis, for preparative liquid chromatography, general laboratory use
Supplier: Burdick & Jackson
ACS GENERAL USE SOLVENTS
Expand 2 Items
Supplier: Bel-Art Products, a Part of SP
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: Medicom
Supplier: Honeywell Safety Products
Supplier: Ansell Canada
Supplier: Kimberly-Clark
Supplier: VWR International
Supplier: SCN INDUSTRIAL CA
Supplier: Kimberly-Clark