Vous avez recherché : Gas Filters

Supplier: AGILENT TECHNOLOGIES, INC (CSD) CA

This gas clean filter system delivers clean gases, reducing the risks of column damage, sensitivity loss, and instrument downtime.

Supplier: AGILENT TECHNOLOGIES, INC (CSD) CA

Gas filter system for reduced risk of column damage, sensitivity loss, and instrument downtime.

Supplier: Restek

Ensure high-purity output in these gas filters with 99.9999% pure gas (at a max flow of 2 L/min) with the use of these filter kits.

Supplier: Restek

Ensure high-purity output in these gas filters with 99.9999% pure gas (at a max flow of 2 L/min) with the use of these filter kits.

Supplier: Restek

For use with super-clean gas filter for LC-MS.

Supplier: AGILENT TECHNOLOGIES, INC (CSD) CA

Inline GC gas purifiers, traps, and filters for removal of oxygen, moisture, and hydrocarbons.

Supplier: OK INTERNATIONAL TE

For Cleaning with solvents or conformal coatings. For use with BVX-201 and BVX-203 systems.

Supplier: Labclear

Removes water, oil, and other foreign material from inert gases such as nitrogen, helium, argon, and hydrogen.

Supplier: Restek

For use in Restek Super Clean® gas trapping systems for LC-MS.

Supplier: Trajan Scientific and Medical

Gas purifiers are designed to provide fast stabilization times to reduce gas consumption and provide clean gas to GC and GCMS systems.

Supplier: AGILENT TECHNOLOGIES, INC (CSD) CA

Renewable and long-lasting gas filter system for trapping large amounts of contaminants.

Supplier: PerkinElmer

For the filtration of oxygen, water, and hydrocarbons.

Supplier: Ace Glass

This space-saving, elliptical shaped, bump trap is used in rotary evaporators between the steam tube and the evaporator flask.

Supplier: Trajan Scientific and Medical

Gas purifier kits are designed to provide fast stabilization times to reduce gas consumption and provide clean gas to GC and GCMS systems.

Supplier: Hirschmann

Round filter set with plug connection on one side.

Supplier: Trajan Scientific and Medical

Big Trap Gas Purifiers are deisgned for bulk purification applications, or where several instruments are plumbed from a single source.

Supplier: Labconco

Replacement HEPA filter for use with XPert filtered systems and stations, XPert TXE equipment enclosures, FilterMate portable exhausters, Purifier logic biosafety sabinets, Purifier Cell Logic biosafety cabinets and Double HEPA filtration kits.

Supplier: Restek

Install an indicator after the Click-On in-line gas filter so there is no confusion about when to replace the traps.

Supplier: Labconco

Organic carbon filter, Type AC. It contains 12 pounds of granular activated carbon media suitable for organic solvents including acetone, ethyl acetate, toluene and xylene.

Supplier: Thermo Fisher Scientific

Trap smoke and oil mist caused by high pressure operation at the pump exhaust port.

Supplier: Restek

End fittings area available in brass and stainless steel.

Supplier: Labconco

Carbon filter for pre-2005 FilterMate portable exhausters.

Supplier: Restek

A Super Clean® quick-change cartridge system efficiently removes hydrocarbons from nitrogen; the Super Clean® gas trapping system purifies nitrogen and is ideal for use in LC-MS systems.

Supplier: Restek

Super-clean filters are specifically designed for purification of helium in GC-MS systems.

Supplier: Restek

All traps measure 27×4.4 cm.

Supplier: Labclear

Ideal for gas chromatography, glove boxes, and anaerobic experiments.

Supplier: Restek

All traps measure 27×4.4 cm.

Supplier: Electron Microscopy Sciences

Protection from oil mist emissions as required by COSHH and health and safety regulations.

Supplier: Restek

Helium-specific Click-On in-line Super Clean® gas trap and kits are designed specifically for purification of helium in GC-MS systems.

Supplier: Restek

Ideal for use with purge-and-trap systems to stop carrier gas interferences.