Vous avez recherché : Fume Hoods and Enclosures

Supplier: Bel-Art Products, a Part of SP

These corrosion-proof polypropylene plastic exhaust hoods are designed to rest on the rear edge of tanks and draw a stream of air across the top of the tank away from the operator.

Supplier: Mettler Toledo

METTLER TOLEDO Enclosures by Labconco are specifically designed to protect the analyst during the weighing process

Supplier: Erlab

Erlab’s HALO Carbon is a ceiling mounted laboratory grade air filtration system working to purify the air from fugitive emissions present in the laboratory, while also providing real-time communication with the laboratory manager and users, of the air pollution levels and 24/7 data.

Supplier: Labconco

The AtmoSense™ moisture monitor is designed for general purpose trace moisture detection as low as 0 to 20 ppm.

Supplier: Labconco

Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation.

Supplier: Labconco

ClassMate™ laboratory hoods are designed to meet the needs of instructional laboratories.

Supplier: Labconco

Recommended whenever perchloric acid is used in combination with other corrosive inorganic reagents.

Supplier: Labconco

Testing confirms the Protector XL floor-mounted laboratory hoods with vertical-rising sashes meet the SEFA-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm.

Supplier: Labconco

Specifically designed to solve unique ventilation problems, this canopy hood vents nontoxic materials such as heat, steam, and odors from large or bulky equipment.

Supplier: Labconco

Labconco Protector® Premier® fiberglass fume hoods have a one-piece liner of specially-formulated, fiberglass-reinforced polyester, which offers corrosion and fire resistance and easy clean up.

Supplier: Labconco

Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.

Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.

The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station,

Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.

Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor.

Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.

For assistance, contact your local sales representative

Supplier: Labconco

Interior is one piece, Type 316 stainless steel with integral work surface and drainage trough.

Supplier: Labconco

Protector XL floor-mounted laboratory hoods with horizontal-sliding sashes are suitable for general chemistry applications and have the dimensions required for over-sized equipment.

Supplier: Labconco

Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation. Ideal for oversized equipment.

Supplier: Labconco

Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation. Ideal for oversized equipment.

Supplier: Kewaunee

These chambers can be added to the top of any Supreme Air fume hood to convert it to an auxiliary air fume hood.

Supplier: MONASHEE MANUFACTURING CA

Workstation dust hoods are used where dust is created such as fluxing, cleaning pulverizer bowls or cleaning screens. These units effectively capture and collect dust while providing uniform airflow, a clean work surface and protecting the operator from contaminants. Designed for industrial and mining applications, our workstation dust hoods have a 10" flange for connecting to existing duct work and are required to be connected to an appropriately sized dust collector (sold separately, contact us for more information).

Supplier: Labconco

Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.

Supplier: Labconco

Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.

Supplier: Labconco

Solid epoxy work surfaces are 3.2cm (1¹/₄") thick, 65.7cm (25⁷/₈") deep, and dished to contain spills.

Supplier: Labconco

SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins

Supplier: Labconco

Kit includes a 7.6x15.2cm (3x6") polypropylene cupsink and chrome turret

Supplier: Labconco

The AtmoSense™ Oxygen monitor is designed for general purpose trace oxygen detection as low as 1 ppm.

Supplier: Labconco

Kits include electrical receptacle, junction box, receptacle cover plate, and installation instructions

Supplier: Labconco

Designed to give maximum protection for radiochemical applications.

Supplier: Labconco

High performance fume hoods with integrated sash sensors for automatic multi-speed blower control.

Supplier: Labconco

Fully-featured, energy-efficient fume hood provides an environmentally-friendly solution to ducted fume hoods while simplifying installation.

Supplier: Labconco

Laboratory hoods feature sashes on two sides that, when mounted in an island or peninsular configuration, provide unobstructed viewing from either side during chemistry demonstrations or observing students using the hood

Supplier: Labconco

The AtmoSense™ Oxygen monitor is designed for general purpose trace oxygen detection as low as 1 ppm.

Supplier: Labconco

Combine with a base stand or cabinet to support Fiberglass 30 and Basic™ Labconco® laboratory hoods.