Embedding Cassettes

Supplier: Simport Scientific

These cassettes with lids are made of a high-density acetal polymer and keep specimens safely submerged in liquid

Supplier: Simport Scientific

Secure specimens during processing with the Unisette™ Biopsy Processing/Embedding Cassette.

Supplier: Simport Scientific

These disposable cassettes hold biopsy specimens efficiently during the embedding process and in storage

Supplier: Simport Scientific

Secure specimens during processing with the Swingsette™ Tissue Processing/Embedding Cassette, in Quickload™ stacks.

Supplier: Electron Microscopy Sciences

Ideal for prostate, brain, breast tissue and eyes.

Supplier: Kemtech America

Kemtech offers a wide variety of cassettes for processing and embedding histological tissue specimens, most of which can be used with automated cassette labelling instruments.

Supplier: StatLab

Two-piece design with a separate lid and square 0.38 mm pores.

Supplier: Simport Scientific

Molded from acetal, these patented cassettes keep specimens safely submerged in liquid and are resistant to most histological solvents. The anterior writing area is at a 45° angle to make the cassette more suitable to be used with most types of cassette labeling instruments.

Supplier: Simport Scientific

Disposable plastic cassettes hold tissue specimens during processing, embedding, and storage

Supplier: Simport Scientific

Made of acetal and resistant to the chemical action of most histological solvents suitable for automated printers.

Supplier: Electron Microscopy Sciences

They measure 35 mm (I.D.) x 35 mm (I.D.) x 10 mm (deep) (1 3/8" x 5/16").

Supplier: Electron Microscopy Sciences

The system includes four Blocklock modules which can be fixed to mounting panels for 3-ring binders or can be stored into Blocklock storage boxes.

Supplier: StatLab

Pathflow PiSmart laser cassettes are a two piece design with a rear hinge and front tab closure. Threaded cassettes come in stacks of 40 cassettes, and 50 stacks per case of 2000.

Supplier: Electron Microscopy Sciences

This section offers you a simple system of stainless steel well bars, chucks and freezing blocks, kept cold in cryostat, allow you to perform a variety of precision embedding techniques addressing the most difficult embedding tasks with ease and minimum time needed. 20 to 60 seconds needed to freeze (depending on the well size). Multiple samples handled quickly with no monitoring necessary (for placement of heat extractor). Precise flat or on edge embedding, predictable orientation, liquid samples easily embedded and no crush artifact caused by heat extractor weight. Reduce tissue waste with less trimming the result of flat plane of embedding. Minute samples embedding in the same plane.  Less cryostat adjustments necessary, comfortably preformed on a shelf just inside most cryostats. Easy to use and saves time.

Supplier: Simport Scientific

These polypropylene capsules are suitable for holding tissue samples during processing

Supplier: Simport Scientific

These disposable plastic cassettes with lids are made of acetal polymer and hold tissue or biopsy specimens during the embedding process and for storage.