Vous avez recherché : Adapters, Joints with Tube Connectors

Supplier: Ace Glass

This 105° angle adapter has standard taper joints or spherical joints.

Supplier: Ace Glass

For use with chromatography columns, these bottom drip adapters have a flow regulator valve and an internal thread.

Supplier: Ace Glass

This adapter is used with vacuum manifolds as port connections.

Supplier: Ace Glass

This is a sampling adapter with a septum port at the top for handling air-sensitive materials.

Supplier: Ace Glass

This adapter features a T-Bore, 2mm stopcock at the top.

Supplier: SP Industries

Featuring a 90° bend to hose connector at top and a Standard Taper inner joint at bottom.

Supplier: DWK Life Sciences (KIMBLE)

The offset connecting adapter is used with multiple entry flasks or reaction vessels.

Supplier: DWK Life Sciences (KIMBLE)

Vacuum filtration adapters with hose connection is used for reduced pressure filtration using plain stem buchner funnels.

Supplier: Ace Glass

This adapter has a side tube with a hose connection for purging out as a gas inlet tube.

Supplier: DWK Life Sciences (KIMBLE)

Adapter features a hose connection on the side.

Supplier: Ace Glass

This adapter features a side arm at a 105° angle.

Supplier: Ace Glass

This adapter is threaded at both ends.

Supplier: DWK Life Sciences (KIMBLE)

Designed for use as a vent or for the introduction of vacuum or pressure.

Supplier: Bel-Art Products, a Part of SP

Stopper has Teflon® PTFE body with Viton® O-Ring.

Supplier: Ace Glass

Economical small-scale sublimation apparatus.

Supplier: Ace Glass

These adapters feature a straight hose connection at top.

Supplier: DWK Life Sciences (KIMBLE)

Inlet gas adapters have a standard taper joint.

Supplier: Kemtech America

Adapter has an O-ring joint with a vacuum valve at a 90° angle connected to a piece of medium wall tubing.

Supplier: Kemtech America

This mineral oil bubbler has a 10 mm O.D.

Supplier: Ace Glass

The top FNPT connection of this bushing adapter matches male Swagelok® fittings and facilitates joining plastic or metal tubing to Ace-Thred glass fittings and adapters.

Supplier: Ace Glass

This rotary evaporator “splash guard” adapter features a coarse Porosity A fritted disc that assures there will be no carry-over in the event of splash-up.

Supplier: DWK Life Sciences (KIMBLE)

Adapters are bent at a 105° angle for use in vacuum distillation.

Supplier: Kemtech America

This inlet adapter features a hose connection, vacuum take-off and drip tip.

Supplier: DWK Life Sciences (KIMBLE)

Designed for use with plain thermometers, pipets, syringes, or other small items with an O.D. from 2mm to 11mm.

Supplier: Ace Glass

This thermometer adapter is made of PTFE with a knurled nut to adapt standard chemical thermometers.

Supplier: Ace Glass

Polyether ether ketone (PEEK) union for use with flanged tubing only.

Supplier: DWK Life Sciences (KIMBLE)

Adapter has a 170-220 micron porosity disc between the hose connection and the inner joint.

Supplier: Ace Glass

Aadapters are designed for reduced pressure filtration with plain-stem Buchner funnels.

Supplier: Kemtech America

Vacuum valves have two Viton® O-rings on the shaft and an integral PTFE O-ring on the tip.

Supplier: DWK Life Sciences (KIMBLE)

Adapters allow interfacing between outer Standard Taper jointed glassware with threaded microscale components.