Vous avez recherché : Lids
KF Flange Flat Stainless Steel Head, Ace Glass
Supplier: Ace Glass
KF Flange flat stainless steel head with holes to accept PTFE standard taper joint inserts.
Expand 1 Items
Sieve Covers, Polished Brass, Thermo Scientific
Supplier: Thermo Scientific Chemicals
Expand 2 Items
PTFE Bottom Surface Cover for Stainless Steel Flat Head, Ace Glass Incorporated
Supplier: Ace Glass
PTFE bottom surface cover will protect stainless steel flat heads from chemical attack.
Expand 4 Items
Bath Lids for Refrigerated/Heating Circulators, Julabo
Supplier: JULABO
Condensation trap bath tank lid. Reduces/eliminates moisture condensation in bath fluid at <10 °C operation. Lid locks in place with fluid fill port and outlet for connection to nitrogen gas purge. Use with refrigeration models: 600F, 601F, 1000F, 1000FW.
Expand 2 Items
SklarLite™ Mid Size Rigid Sterilization Container Lids, Sklar
Supplier: Sklar
The SklarLite™ Mid Size Rigid Sterilization Container Lids are available in a variety of colors.
Expand 12 Items
Reaction Vessel Lids, 5-Necks, Chemglass
Supplier: Chemglass
Reaction vessel lids feature 30° angle side necks.
Expand 6 Items
Three-Neck Reaction Vessel Lids, Chemglass
Supplier: Chemglass
These three neck reaction vessel lids have a flat ground surface allowing it to be greased or used with an o-ring.
Expand 8 Items
Reaction Vessel Lid, 3-Necks, Chemglass
Supplier: Chemglass
Reaction vessel lids feature 30° side necks.
Expand 1 Items
Reaction Vessel Lids, 6-Necks, Chemglass
Supplier: Chemglass
Six-neck lid for 200 mm flanged vessel.
Expand 1 Items
Reaction Vessel Lid, 5-Necks, 150 mm, Chemglass
Supplier: Chemglass
Reaction vessel lids feature five-necks.
Expand 1 Items
Instrument Tray Covers, Sklar
Supplier: Sklar
Sklar® Instrument Tray Covers are seamless to prevent bacterial growth.
Expand 15 Items
Reaction Vessel Lids, PTFE, 80 mm, Chemglass
Supplier: Chemglass
Reaction vessel lid is constructed entirely of PTFE.
Expand 1 Items
Microplate Lids and Seals
Supplier: AGILENT TECHNOLOGIES (GENOMICS) CA
Universal lids and cap mats for square microplates.
Expand 2 Items
Reaction Vessel Lids, 5-Necks, Low Profile, 10° Angled Side Necks, Chemglass
Supplier: Chemglass
Low profile five neck vessel lid to fit CG-1920 through CG-1936 vessels.
Expand 4 Items
Reaction Vessel Lids, 5-Necks, 10° Angled Side Necks, Chemglass
Supplier: Chemglass
Reaction vessel lids feature five necks.
Expand 4 Items
Four-Neck Reaction Vessel Lids, Chemglass
Supplier: Chemglass
These four neck reaction vessel lids have a flat ground surface allowing it to be greased or used with an o-ring.
Expand 13 Items
Instrument Tray Covers, Sklar
Supplier: Sklar
Sklar's Instrument Tray Covers are seamless to prevent bacterial growth.
Expand 19 Items
Reaction Vessel Lids, 4-Necks, Chemglass
Supplier: Chemglass
Reaction vessel lids feature 30° angle side necks.
Expand 1 Items
Reaction Vessel Lid for CG-1968-W Style Reactors, Chemglass
Supplier: Chemglass
Reaction vessel lid is constructed of ¹/₄" thick #316 S.S. with a ¹/₈" thick PTFE gasket underneath. The only material exposed to the reaction is PTFE.
Expand 1 Items
Five-Neck Reaction Vessel Lids, Chemglass
Supplier: Chemglass
These five neck reaction vessel lids have a flat ground surface allowing it to be greased or used with an o-ring.
Expand 6 Items
Reaction Vessel Lids, 4-Necks, Threaded Connector, Chemglass
Supplier: Chemglass
Four neck vessel lid to fit CG-1920 through CG-1936 vessels.
Expand 6 Items
Nine-Neck Reaction Vessel Lids and Adapters, 150 mm, Chemglass
Supplier: Chemglass
Constructed entirely of PTFE, these low-form lids have nine openings: a 2.5cm (1") female NPT center neck, three 2.5cm (1") female NPT vertical side necks, a 2.5cm (1") female NPT side neck with 10°x10° compound angle, and four 1.3cm (1/2") female NPT side necks
Expand 3 Items
Eight-Neck Reaction Vessel Lids and Adapters, 200 mm, Chemglass
Supplier: Chemglass
Constructed entirely of PTFE, these low-form lids have eight openings: a 2.5cm (1") female NPT center neck, three 3.8cm (11/2") female NPT vertical side necks, a 2.5cm (1") female NPT side neck with 10°x10° compound angle, a 3.8cm (11/2") female NPT side neck at a 10° angle, and two 1.3cm (1/2") female NPT side necks
Expand 3 Items
PYREX® Desiccator Lid, Corning
Supplier: Corning
PYREX® replacement cover for 10.5 L Large Top Desiccator using 24/29 Standard Taper Stopcock.
Expand 1 Items
Seven-Neck Reaction Vessel Lids and Adapters, 100 mm, Chemglass
Supplier: Chemglass
Constructed entirely of PTFE, these low-form lids have seven openings: a 1.9cm (3/4") female NPT center neck, two 1.9cm (3/4") female NPT vertical side necks, a 2.5cm (1") female NPT side neck with 10°x10° compound angle, and three 0.6cm (1/4") female NPT side necks
Expand 2 Items
Lids for Platinum and Platinum 95%/Gold 5% Crucibles, Heraeus
Supplier: HERAEUS MATERIALS TECHNOLOGY NA
Platinum crucible lids are designed for use with either the Heraeus line of Platinum Crucibles or the Platinum 95%/Gold 5% Crucibles.
Expand 14 Items
Whatman™ Lids, Whatman products (Cytiva)
Supplier: Cytiva
Universal lids suitable for robotic handling. Can be used as dust covers and to prevent splashing or contamination when plates are being moved around the laboratory.
Expand 1 Items
Lids for GRINDOMIX Knife Mill, Retsch
Supplier: Retsch
For use in the GM 200 Laboratory Knife Mill. This piston-like lid is free-floating and drops under its own weight during the milling process to rest directly on the sample material at all times. It prevents the sample material from escaping the milling action.
Expand 1 Items
Lids for Wire Mesh Sterilization Baskets
Supplier: WORLD PRECISION INSTRUMENTS LLC
Single frame lids for use with wire mesh sterilization baskets.
Expand 5 Items
Lid for Digital Tissue Water Bath
Supplier: StatLab
Easy to use drop-on water bath lid improves heating efficiency and control, while protecting water from contamination.