Vous avez recherché : Faucets and Sinks

Supplier: Speakman

The Speakman® Commander® service sink faucet line provides facilities with high quality and reliable brass faucets.

Supplier: Eagle Group

Portable hand sinks need no additional plumbing, all you need is water and a 120-volt receptacle

Supplier: Diversified Woodcrafts

Make cleanup quick and easy. The unit includes an expansive stainless steel sink with two locking base cabinets and center panel made of plywood and your choice of solid maple or Oak finished in an earth-friendly UV finish.

Supplier: Eagle Group

Portable hand sinks need no additional plumbing, all you need is water and a 120-volt receptacle. 

Supplier: Qorpak

This tap makes it quick and easy to pour liquids from one container to another.

Supplier: Advance Tabco

The '400' series is 16 gauge type 430 series.

Supplier: Eagle Group

Type 304 stainless steel sink bowl with marine edge.

Supplier: Bel-Art Products, a Part of SP

A needle-type, Teflon®O-Ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob.

Supplier: Advance Tabco

All TIG welded. Top and all exposed surfaces are mechanically polished to a satin finish and sound deadened.

Supplier: Advance Tabco

The single pedal operated knee valve offers hands-free operation.

Supplier: Advance Tabco

One piece seamless deep drawn stainless steel bowl.

Supplier: Advance Tabco

Features one-piece construction of heavy gauge, Type 304 stainless steel.

Supplier: Advance Tabco

Floor mounted unit eliminates the need for lifting heavy containers.

Supplier: Diversified Woodcrafts

Easy to clean and impact resistant to reduce glassware breakage, the polyolefin top of this unit increases safety in the lab.

Supplier: Kewaunee

Molded of modified epoxy resin, these durable top-mounted sinks come with coved corners and bottoms pitched to the 3.8 cm (1¹/₂") sized drain outlet.

Supplier: WaterSaver Faucet

For installation on vertical or horizontal surfaces (such as pipe chases and service carriers) where there is access behind surface during installation.

Supplier: WaterSaver Faucet

Panel-mounted mixing faucets are made of white epoxy/polyester hybrid powder-coated cast brass

Supplier: Scientific Plastics

One-piece molded sinks.

Supplier: WaterSaver Faucet

Deck-mounted pure water fixture has chrome-plated forged brass external construction and all-polypropylene internal construction.

Supplier: Mortech Manufacturing

Add a table top surface rinse to a current autopsy table. The chrome-plated rinse device provides a flow of water over the table surface during use.

Supplier: WaterSaver Faucet

White, epoxy-coated, single straight pattern laboratory needle valve.

Supplier: WaterSaver Faucet

Deck-mounted mixing faucets are made of chrome-plated forged brass and are provided with an aerator, four-arm handles, and 1 cm (³/₈") diameter copper tubes on inlets.

Supplier: WaterSaver Faucet

These deck-mounted faucets are made of chrome-plated brass.

Supplier: WaterSaver Faucet

Deck-mounted single faucets are made of chrome-plated forged brass and supplied with a serrated hose end, four-arm handle and 1 cm (³/₈") IPS shank, locknut, and washer.

Supplier: Scientific Plastics

One-piece, single-bowl sinks with corner drain.

Supplier: WaterSaver Faucet

Straight pattern laboratory needle valve is for gas/air/vacuum service.

Supplier: WaterSaver Faucet

Deck-mounted pure water faucets are made of white epoxy/powder-coated brass.

Supplier: WaterSaver Faucet

Deck-mounted mixing faucets are made of chrome-plated forged brass and provided with a serrated hose end, four-arm handles, and 1cm (³/₈") diameter copper tubes on inlets.

Supplier: WaterSaver Faucet

Deck-mounted mixing faucets are made of white epoxy/polyester hybrid powder-coated forged brass.

Supplier: WaterSaver Faucet

Deck-mounted single faucets are made of chrome-plated forged brass and supplied with a serrated hose end, four-arm handle, and 1 cm (³/₈") IPS shank, locknut, and washer.