You searched for: Specimen Mounting Supplies

Supplier: Electron Microscopy Sciences

Hitachi 15x13mmh.

Supplier: Electron Microscopy Sciences

We offer a complete line of SEM specimen mounts.

Supplier: Electron Microscopy Sciences

Unique orbital specimen holder for a spin and raise SEM images to a whole new level.

Supplier: Electron Microscopy Sciences

These mounts are made from ultra-pure aluminum.

Supplier: Electron Microscopy Sciences

Supplier: Electron Microscopy Sciences

Flat End Pin Surface

Supplier: PROFORMA ASSOCIATES

For Curating Your Collection

Supplier: Electron Microscopy Sciences

These mounts are made from ultra-pure aluminum.

Supplier: Electron Microscopy Sciences

Gun Shot residue mount is free from objectional elements that would interfere with results.

Supplier: Electron Microscopy Sciences

Machined from aluminum rods with one end tapered to 4.8 mm in diameter. The specimen can be oriented and mounted to the tip with glue and it is ready for sectioning. The body size is "00" and it measures 11 mm long.

Supplier: Electron Microscopy Sciences

Head: 25.4 (1") diameter. Pin 3.1 mm (¹/₈") diameter.

Supplier: Electron Microscopy Sciences

For adhesion of specimens and particles for scanning electron microscopy examination.

Supplier: Electron Microscopy Sciences

Stainless steel flat mounting blocks with the diameter of 25 mm (1") are used for lapping and polishing fixtures.

Supplier: Mopec

Available in multiple sizes and colors. Some variations also available in waffle pattern.

Supplier: Electron Microscopy Sciences

Mini Pin, Aluminum For FEI, Tescan, Zeiss, Philips, Leo, Cambridge, AMRAY, Leica, CamScan, ETEC.

Supplier: Electron Microscopy Sciences

Head: 32 mm (1¹/₄”) and Height: 6 mm (¹/₄”).

Supplier: Electron Microscopy Sciences

The gold on carbon specimen is the resolution test of SE and BSE imaging and also for chemical mapping in high-resolution systems such as an Auger scanning instrument.

Supplier: Electron Microscopy Sciences

Hitachi M4 SEM mounts are made from lathe finished ultra-pure aluminum for scanning electron microscopy.

Supplier: SPRINGSIDE SCIENTIFIC, LLC.

Round metal specimen chuck with O-ring made of low temperature resistant rubble; with stem length ~37.5 mm.

Supplier: Electron Microscopy Sciences

The Universal Sample Mounting Fixture is a versatile spring-loaded fixture for securing samples with pressure during mounting using adhesives, waxes, and epoxies.

Supplier: Electron Microscopy Sciences

1) Surface measures 12.7 mm (¹/₂") in diameter and has 3.1 mm (¹/₈") pin
2) Surface measures 10 mm (³/₈") in diameter and height
3) Head measures 15 mm (⁵/₈") in diameter, Height: 10 mm (³/₈")
4) Head measures 25 mm (1") in diameter, Height: 20 mm (¹³/₁₆")

Supplier: SPRINGSIDE SCIENTIFIC, LLC.

This frozen section kit is designed for Leica, IEC, Tanner and other common cryostats.

Supplier: Electron Microscopy Sciences

Clamps thin specimens or cross sections without conductive paint or tape for scanning electron microscopy.

Supplier: Electron Microscopy Sciences

This mount which is made from aluminum is used for the mounting and tilting of samples from 0° – 90° as well as for SEM investigation with small working distances. The mount is marked for 30°, 45°, 70° and 90°. The table measures 11 x 11 mm (0.46” x0.46”)and the overall size is 14 x 14 x 12.7 mm.

Supplier: Electron Microscopy Sciences

This set screw vice which is made from machined aluminum with stainless steel allen set screws has an open slot that is 4 mm wide x 5 mm deep. And has a 3.2 mm dia. pin.

Supplier: Electron Microscopy Sciences

These stainless steel chucks are designed to be used cold for rapid freezing, and to maximize the gripping power required to hold the embedded tissue block. The stem of the chuck provides the focal point for a sharp tap resulting in an easily release of the block from the well. These chucks fit many of the major brand cryostat and can be used in most cryostats with use of an adapter. These Chuck Adapters have stem measures 20mm L x 9mm diameter, and fit Leica and most Microm cryostats. We also offer adapters to use these chuck for other cryostats.

Supplier: Electron Microscopy Sciences

The Tissue Matrix is designed to aid the basic research scientist in the free-hand dissection of a wide variety of different tissues and repeatedly slice fresh tissue at intervals as small as 1 mm.

Supplier: Electron Microscopy Sciences

Specimen mount pin is made of aluminum for mounting samples for ultramicrotomy

Supplier: Electron Microscopy Sciences

Supplier: Electron Microscopy Sciences

Specially designed for easy, quick and clean mounting of any type of thin specimen on specimen stubs.