You searched for: Distillation Components

Supplier: Ace Glass

Used in phosphorus determination

Supplier: Ace Glass

Vacuum comes jacketed and silvered with viewing strip or unsilvered

Supplier: Kemtech America

Distillation joint adapter is suitable for microscale applications.

Supplier: SP Industries

With side arm at angle of 75° from lower part of main tube, these borosilicate glass distilling adapters have three standard taper joints of the same size.

Supplier: Ace Glass

This distillation receiver is calibrated to contain

Supplier: Ace Glass

The apparatus is graduated to 15mL in 1/10mL subdivisions, with the lower 0.5mL contained in a precision tip for better accuracy with extremely small samples

Supplier: DWK Life Sciences (KIMBLE)

These 19/38 apparatus for quantitative analysis of various industrial waste waters, saline and reagent grade water.

Supplier: DWK Life Sciences (KIMBLE)

This apparatus is used for the determination of water in crude oil by distillation.

Supplier: DWK Life Sciences (KIMBLE)

This distillation bent adapters with tapered drip tube.

Supplier: DWK Life Sciences (KIMBLE)

Jacketed distillation columns are manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.

Supplier: DWK Life Sciences (KIMBLE)

This close-coupled condenser and vacuum connection distillation head offers an extremely short condensate travel path.

Supplier: Ace Glass

Short-Path distillation head with integral vigreux vapor path column.

Supplier: Ace Glass

Used for the removal of solvents or other volatiles by vacuum distillation at ambient temperature

Supplier: Ace Glass

The Reflux/Distillation Splitter is used to allow easy switching of the distilate path by means of adjusting the valve position to either open or closed.

Supplier: Ace Glass

This distillation head has a condenser jacket on the side arm

Supplier: Ace Glass

This distillation head has a cold finger type condenser and 0-3mm PTFE stopcock for reflux control

Supplier: Ace Glass

This floating ball type Snyder distillation column has a reinforced [ST] 24/40 outer joint at top and [ST] 24/40 inner joint at bottom

Supplier: Ace Glass

This moisture trap is used for solvents heavier than water

Supplier: Ace Glass

This modified Claisen stye adapter comes with an additional arm with reinforced standard taper outer joint.

Supplier: Ace Glass

The top joint of this adapter is a combination cap, thread and a standard taper joint to accommodate and seal other microscale apparatus.

Supplier: Ace Glass

This distillation head features automatic reflux control via a solenoid valve arrangement

Supplier: Ace Glass

This vacuum jacketed distillation column is silvered with an observation stripe

Supplier: Ace Glass

This adapter is designed for connecting distilling columns with a vertical condenser.

Supplier: Ace Glass

This adapter is available with glass or 1:5 solid PTFE stopcock plug on lower side arm.

Supplier: SP Industries

These distilling receivers are provided with an additional solvent return line which avoids recycling condensate to the flask.

Supplier: SP Industries

Calibrated to contain at 20°C

Supplier: SP Industries

These distilling heads feature a removable cold finger condenser with a Standard Taper 29/42 inner joint.

Supplier: SP Industries

Distilling apparatus includes a three-way bent adapter for a Standard Taper 10/18 thermometer with a 25 mm immersion, a 110 mm Liebig condenser, a 105° vacuum adapter (ML-390-700), a 25 mL Erlenmeyer flask (ML-1230-706), and a pear-shaped 50 mL distilling flask (ML-1160-718).

Supplier: DWK Life Sciences (KIMBLE)

Bent 105° distillation adapters.

Supplier: Ace Glass

The column length in millimeters (listed below) refers to the effective length of the column as measured from the lowest to the highest indent of the column