You searched for: Distillation Components

Supplier: Ace Glass

This distillation receiver is calibrated to contain

Supplier: Ace Glass

The apparatus is graduated to 15mL in 1/10mL subdivisions, with the lower 0.5mL contained in a precision tip for better accuracy with extremely small samples

Supplier: Ace Glass

Vacuum comes jacketed and silvered with viewing strip or unsilvered

Supplier: Ace Glass

Used in phosphorus determination

Supplier: Kemtech America

Distillation connecting adapter accommodates a 76 mm immersion thermometer.

Supplier: Kemtech America

Distillation joint adapter is suitable for microscale applications.

Supplier: DWK Life Sciences (KIMBLE)

This distillation bent adapters with tapered drip tube.

Supplier: DWK Life Sciences (KIMBLE)

Jacketed distillation columns are manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.

Supplier: DWK Life Sciences (KIMBLE)

This close-coupled condenser and vacuum connection distillation head offers an extremely short condensate travel path.

Supplier: Ace Glass

The Kjeldahl trap adapter is used to prevent carryover of reactions that have a tendency to foam.

Supplier: Ace Glass

This head has a finger type condenser and a Newman type stopcock for reflux control

Supplier: Ace Glass

Especially useful when heavier-than-water solvents are employed

Supplier: Ace Glass

Modified Bidwell & Sterling type with overflow to allow excess solvent to return to boiling flask

Supplier: SP Industries

This short path distillation head features Vigreux indentations in the bottom portion of the stem to improve efficiency.

Supplier: Kemtech America

Rotating distillation receiver allows four fractions to be collected.

Supplier: Ace Glass

This column has a reinforced outer [ST] joint at top and a ground inner [ST] joint at bottom

Supplier: Ace Glass

The column length in millimeters (listed below) refers to the effective length of the column as measured from the lowest to the highest indent of the column

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Ace Glass

Adapter's top joint is a combination cap, thread and joint to accommodate and seal other microscale apparatus.

Supplier: Ace Glass

Arsenic Limit Test apparatus as described in the European Pharmacopeia chapter 2.4.3.

Supplier: Ace Glass

Distilling head sits on top of your vapor path column. Has condenser side arm with drip tip.

Supplier: Ace Glass

This Vigreux distillation column has a male drip tip on the joint of the Claisen side arm, and a [ST] 10/30 joint for a 25mm immersion thermometer

Supplier: DWK Life Sciences (KIMBLE)

For the determination of free sulfite and a reproducible portion of the bound sulfites in food, such as the carbonyl addition products.

Supplier: SP Industries

This Kjeldahl distilling apparatus is made of borosilicate glass.

Supplier: SP Industries

Designed for oils lighter than water, this distilling apparatus is made of borosilicate glass and consists of a Clevenger-type trap with a Standard Taper 24/40 outer joint on top and same size inner joint the sidearm

Supplier: Ace Glass

This adapter features a 75° side arm.

Supplier: Ace Glass

Distilling trap adapters are placed above flask to prevent carryover of reactions that have a tendency to foam.

Supplier: Ace Glass

This apparatus is useful for separating higher boiling liquids that require a short flask-to-column distance to prevent excessive condensation

Supplier: Ace Glass

Microscale Hickman still head is used to carry out micro-sample fractional distillations