67 Results for: "WaterSaver Faucet"

Supplier: WaterSaver Faucet

The quick connect keying system is based upon the inner and outer diameters of the sleeves on the body and plug

Supplier: WaterSaver Faucet

Pressure regulator fixture used in regulation of high purity gases including nitrogen, helium argon and oxygen.

Supplier: WaterSaver Faucet

White epoxy-coated single flange laboratory ball valve with integral straight serrated hose end

Supplier: WaterSaver Faucet

Curb-mounted mixing faucets are made of chrome-plated cast brass and are provided with a serrated hose end, four-arm handles, and 1 cm (³/₈") IPS inlet shanks, locknuts, and washers.

Supplier: WaterSaver Faucet

Straight pattern laboratory needle valve is for gas/air/vacuum service.

Supplier: WaterSaver Faucet

Since isotope hoods do not have interior access panels, they require a front load fitting that can be accessed from outside the hood

Supplier: WaterSaver Faucet

Panel-mounted mixing faucets are made of white epoxy/polyester hybrid powder-coated cast brass

Supplier: WaterSaver Faucet

White, epoxy-coated, single straight pattern laboratory needle valve.

Supplier: WaterSaver Faucet

For installation on vertical or horizontal surfaces (such as pipe chases and service carriers) where there is access behind surface during installation.

Supplier: WaterSaver Faucet

This coupling is designed for use with all standard goosenecks and it replaces washer in a fixed gooseneck faucet, converting it to a swing faucet.

Supplier: WaterSaver Faucet

Deck-mounted pure water fixture has chrome-plated forged brass external construction and all-polypropylene internal construction.

Supplier: WaterSaver Faucet

Point-of-use regulation of high purity gases for installation on fume hoods. Used for compressed air and inert high purity gases, including nitrogen, helium, argon and oxygen.

Supplier: WaterSaver Faucet

Deck-mounted mixing faucets are made of chrome-plated forged brass and provided with a serrated hose end, four-arm handles, and 1cm (³/₈") diameter copper tubes on inlets.

Supplier: WaterSaver Faucet

Deck-mounted single faucets are made of chrome-plated forged brass and supplied with a serrated hose end, four-arm handle, and 1 cm (³/₈") IPS shank, locknut, and washer.

Supplier: WaterSaver Faucet

Deck-mounted mixing faucets are made of white epoxy/polyester hybrid powder-coated forged brass.

Supplier: WaterSaver Faucet

Deck-mounted pure water faucets feature tin-lined, chrome-plated brass or all-PVC construction.

Supplier: WaterSaver Faucet

Drench hoses provide a soft, wide stream of water that quickly and gently rinses away contaminants.

Supplier: WaterSaver Faucet

These wall-mounted units feature two GS-Plus 'Gentle Spray' heads to quickly and gently rinse contaminants away.

Supplier: WaterSaver Faucet

Designed to provide complete personal protection, these corrosion-resistant safety stations feature a single water inlet that supplies both the shower and eye wash.

Supplier: WaterSaver Faucet

These wall-mounted faucets are made of chrome-plated brass.

Supplier: WaterSaver Faucet

This wall-mounted unit quickly and gently rinses contaminates away from both eyes simultaneously.

Supplier: WaterSaver Faucet

Featuring four GS-Plus “Gentle Spray” heads, these eye/face washes provide a soft, wide stream of water that gently and quickly rinses contaminants away.

Supplier: WaterSaver Faucet

Designed to mount vertically or horizontally, these emergency showers consist of a 25.4 cm (10") Ø orange ABS plastic showerhead and stainless steel actuating arm, plus a 2.5 cm (1") IPS female inlet.

Supplier: WaterSaver Faucet

FAUCET DECK MNT MIXNG 8IN RIGID/SWING GN

Supplier: WaterSaver Faucet

FAUCET DECK MNT MIX 8IN RIGID/SWNG VB BH

Supplier: WaterSaver Faucet

FAUCET DECK MNT MIXNG 6IN RIGID/SWNG ADA

Supplier: WaterSaver Faucet

FAUCET DECK MNT MIXNG 8IN RIGID/SWNG ADA

Supplier: WaterSaver Faucet

UPRIGHT ROD ASSEMBLY

Supplier: WaterSaver Faucet

REMOTE CONTROL H20 FIXTURE

Supplier: WaterSaver Faucet

REMOTE CONTROL-AIR FIXTURE