231 Results for: "Titration Solutions"
VPac™ Standard Kits for Performance Verification of EasyPlus™ Titrators
Supplier: Mettler Toledo
This kit used for performance verification is a dedicated service solution for users of EasyPlus Titrators. Due to verification user gains confidence in generating accurate and reliable results, possess control over the performance of the titration system and to receive documentation of an unbiased analysis verification.
Expand 1 Items
Auxilary Reagents for Karl Fischer Titration, HYDRANAL™, Honeywell Research Chemicals
Supplier: Honeywell Research Chemicals
Karl Fischer titration is applied to multifarious substances. The nuances in sample properties influence the Karl Fischer titration differently. There are a number of ways to adjust the working conditions.
Expand 2 Items
Starch 1% (w/v) 0.5N in aqueous solution stabilized indicator
Supplier: Spectrum Chemical Mfg. Corp.
Starch Indicator, 1 Percent (w/v) Aqueous Solution, Stabilized, is used in chemistry as an indicator for redox titrations where triiodide is present. These titrations are typically useful in volumetric analysis for determination copper(II), antimony (V), chlorate, hydrogen peroxide, dissolved oxygen, sulfite and sulfide levels
Expand 1 Items
Hydrion® Lo Iodine Test Kit, Micro Essential Laboratory
Supplier: Micro Essential
The Hydrion Lo iodine kit provides an easy way to estimate the amount of titratable iodine in sanitizing solutions made with commercial iodophors. The color chart is easy to read and has color matches at 0, 12.5, 25, 50 ppm (parts per million) of titratable iodine.
Expand 1 Items
Dissolved Oxygen Reagent Set, Digital Titrator, 300 ml, Hach
Supplier: Hach
For determination of Dissolved Oxygen by Digital Titrator titration, using the Winkler Azide Modification method. Hach Method 8215. Range: 1 - 10 mg/L Set Includes: Alkaline Iodide-Azide Powder Pillows, Manganous Sulfate Powder Pillows, Sodium Thiosulfate Digital Titrator Cartridge (0.200 N), Starch Indicator Solution and Sulfamic Acid Powder Pillows for approximately 50 tests.
Expand 1 Items
Hardness (Total), Titrets Titration Cells, CHEMetrics
Supplier: CHEMetrics
The test kits utilize CHEMetrics Titrets® ampoules. Titrets ampoules use a reverse titration technique to measure analyte concentration levels (titrant volume inside the ampoule is fixed while the sample volume is varied).
Expand 1 Items
Hydrogen Peroxide, Titrets Titration Cells, CHEMetrics
Supplier: CHEMetrics
The Titrets® test uses a ceric sulfate titrant with ferroin indicator. Depending on the procedure used, this kit can determine H2O2 concentrations from 0.01% to as high as 20%.
Expand 1 Items
Nitrite, Titrets Titration Cells, CHEMetrics
Supplier: CHEMetrics
Ceric sulfate is the titrant and ferroin is the end point indicator. The method is free from glycol interference in samples that contain up to 75% glycol, making it particularly applicable to systems that contain nitrite corrosion inhibitors. Results are expressed as ppm (mg/L) NaNO2.
Expand 1 Items
Hydranal™ Water Standards for Karl Fischer Titration, Honeywell Research Chemicals
Supplier: Honeywell Research Chemicals
Broad product range for volumetric and coulometric Karl Fischer applications, as well as the indirect oven application.
Expand 2 Items
Determination of the Alkalinity of Water
Supplier: Ward's Science
This kit allows analysts to perform a very simple titration to determine the alkalinity and the phenolphthalein of their fresh water sample.
Expand 1 Items
Bromocresol green-methyl red solution pH-indicator
Supplier: Hach
pH indicator for alkalinity determination by titration
Expand 2 Items
Aquatest 2010 Karl-Fischer Coulometric Moisture Titrator, Photovolt
Supplier: Photovolt Instruments
The Photovolt Aquatest 2010 moisture analyzer provides rapid, accurate convenient low level moisture analysis from low ppm range to pure water with maximum isolation of solutions from atmospheric moisture
Expand 1 Items
Bromocresol green-methyl red, powder pillow pH-indicator
Supplier: Hach
pH indicator for determination of total alkalinity by titration methods.
Expand 1 Items
Potassium chloride 99.0-100.5% (by argentometric titration), crystals, BAKER ANALYZED® ACS, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
The USP/NF Offical Compendia of Standards contains a section titled, "Reagents, Indicators, and Solutions" that lists the quality requirements of chemicals to be used in compendia testing. PharmaTest reagents are tested according to these requirements, relieving you of the need to do additional testing on your reagents. Products may be reagent or other grade, but are labeled as "Meets reagent specifications for testing USP/NF monographs." Test solutions are labeled as PharmaTest.
Expand 6 Items
Sulfuric acid 0.020 N volumetric solution
Supplier: Hach
For alkalinity determination by buret titration.
Expand 2 Items
Hydrochloric acid 37.0 - 38.0%, CMOS for microelectronic, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Muriatic acid. CAS RN 7647-01-0. Formula Weight: 36.46. Density: 1.18kg/L. CMOS* grade, 37.0-38.0% (by acid-base titration). Color (APHA): 10 max. Extractable organic substances: 3ppm max. Packaged in a poly-coated bottle. Subject to postal/shipping restrictions. 2.72kg.
Expand 3 Items
Hydrochloric acid 37.0 - 38.0%, Finyte®, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Muriatic acid. CAS RN 7647-01-0. Formula Weight: 36.46. Density: 1.18kg/L. Finyte* grade, 37.0-38.0% (by acid-base titration). Color (APHA): 10 max. Extractable organic substances: 3ppm max. Packaged in a poly bottle. Subject to postal/shipping restrictions. 4.54kg.
Expand 1 Items
Iodine standard solution 0.0282 N
Supplier: Hach
For determination of chlorine by amperometric buret titration.
Expand 1 Items
EDTA Standard Solution, 0.035 N, 100 ml, Hach
Supplier: Hach
For hardness determination by drop-count titration.
Expand 1 Items
Phenylarsine oxide standard solution 0.00564 N
Supplier: Hach
For chlorine determination by amperometric titration methods.
Expand 2 Items
EDTA Standard Solution, 0.0200 N, 4 L, Hach
Supplier: Hach
For hardness determination by buret titration
Expand 1 Items
Sulfuric acid 0.035 N volumetric solution
Supplier: Hach
For alkalinity determination by drop-count titration test kit.
Expand 1 Items
Sodium Thiosulfate Standard Solution, Stabilized, 0.0246 N, 100 ml, Hach
Supplier: Hach
Stabilized sodium thiosulfate titrant for chlorine determination by iodometric titration.
Expand 1 Items
Hardness 1 Buffer Solution, 50 ml, Hach
Supplier: Hach
Buffer for hardness and chelant determination by titration, pH 10.1 ± 0.1 at 20°C.
Expand 1 Items
Hardness 2 Indicator Solution, 100 ml, Hach
Supplier: Hach
ManVer (Calmagite) Hardness Indicator, for hardness and chelant determination by titration.
Expand 1 Items
Aquastar™ CombiSolvent, EMD Millipore
Supplier: MilliporeSigma
Methanol-free solvent for volumetric Karl Fischer titration with one component reagents.
Expand 1 Items
HYDRANAL® Karl Fischer Reagents, Honeywell Research Chemicals
Supplier: Honeywell Research Chemicals
Original and Innovative Karl Fischer Reagents to analyze or measure water content
Expand 8 Items
Sodium Thiosulfate Standard Solution, Stabilized, 0.00246 N, 500 ml, Hach
Supplier: Hach
For determination of Chlorine by drop count titration
Expand 1 Items
Sodium hydroxide 0.01 N in 2-propanol/water volumetric solution
Supplier: Hach
For carbon dioxide determination by drop-count titration.