132 Results for: "Koehler"

Supplier: Koehler

Constant temperature water baths designed for Reid Vapor Pressure determinations of liquid petroleum products and liquefied petroleum gases (LPG).

Supplier: Koehler

Accessory to Smoke Point Lamp (52938-040). Prepared in accordance with ASTM D1322 (7.2) requirements. Packed in a sealed tube with dessicant. Comes in pack of 12.

Supplier: Koehler

Single phase, constant temperature bath for kinematic viscosity testing of petroleum products

Supplier: Koehler

For use with Koehler Kinematic Viscosity Baths, models 37000-158, 37000-160, 37000-156 and 37000-164.

Supplier: Koehler

The sample is evaporated and condensed under controlled conditions, with measurements of the temperatures at which various percentages are recovered and/or the percentages recovered at specified temperatures

Supplier: Koehler

Stainless steel. Accommodates liquid products having Reid Vapor Pressure above 26psi & liquified petroleum gas. Withstands 1000psi gauge hydrostatic pressure. Threaded 0.25cm gauge coupling, 2 air/gas chamber O-ring seals. Conforms to ASTM D323 & D1267

Supplier: Koehler

Used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures

Supplier: Koehler

Used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures according to IP2-56 Method D

Supplier: Koehler

It cleans and dries glass capillary viscometers using solvent and pressurized filtered air.

Supplier: Koehler

For use with Koehler's Pensky-Martens Flash Testers, models 37000-096, 37000-098 and 37000-092.

Supplier: Koehler

Constant temperature water bath for conditioning samples requiring close temperature control prior to or during a penetration test

Supplier: Koehler

The Saybolt Chromometer measures color by comparing a column of sample against standard color discs.

Supplier: Koehler

Compact four-place portable chamber for the immersion of copper test jackets in suitable freezing mixtures at the required depth per ASTM specifications

Supplier: Koehler

This high precision spectrophotometer for objective color analysis of petroleum fuels, oils, waxes and petrochemicals according to the Saybolt and ASTM color scales

Supplier: Koehler

Core-type sampler made of stainless steel and brass construction with simple spring mechanism for taking accurate samples.

Supplier: Koehler

For use with model numbers 37000-084, 37000-088 and 37000-090.

Supplier: Koehler

Suitable for samples having 6.5 or lighter ASTM D1500 color. Consists of U-Tube; 400mL Pyrex* beaker; cover assembly with bath stirrer; sample stirrer and cooling coil; 6V lamp with line cord; and drive motor. 220-240V, 50/60Hz, 13.4A.

Supplier: Koehler

Constant temperature water bath for conditioning samples requiring close temperature control prior to or during a penetration test

Supplier: Koehler

The high temperature dropping point test permits higher temperatures than the ASTM D566 method and uses a different heating procedure.

Supplier: Koehler

Sampling tubes are suitable for taking bottom or other-level samples from barrels and drums.

Supplier: Koehler

For use with Tag Closed Cup Flash Testers, models 52931-303, 37000-078 and 37000-080.

Supplier: Koehler

Constant temperature water baths designed for Reid Vapor Pressure determinations of liquid petroleum products and liquefied petroleum gases (LPG).

Supplier: Koehler

Burns fuel samples under controlled conditions for smoke point determinations of aviation turbine fuels and similar products

Supplier: Koehler

Precision machined stainless steel pressure vessel includes threaded body, lid, stem with filler rod and mounting flange, and needle valve for purging, pressurizing, and exhausting pressure vessel with oxygen

Supplier: Koehler

Brass test cup for use with Cleveland Open Cup Flash Tester (37000-072).

Supplier: Koehler

Provides an indication of the deposit-forming tendencies of fuels by determining the volume of carbon residue left after evaporation and pyrolysis of a sample oil

Supplier: Koehler

Devices obtain samples from any level in storage tanks, tank cars, and drums

Supplier: Koehler

Lubricating oils are aerated at specified temperatures to generate a foam, which is measured at different intervals

Supplier: Koehler

Designed for ASTM penetration tests on petroleum products and for consistency tests on a wide range of food products, cosmetics, pastes and other solid to semisolid products

Supplier: Koehler

For testing of bituminous materials