47 Results for: "Glassco"

Supplier: Glassco

Anti-Splash adapters are used between the vapor tube and evaporation flask on a rotary evaporator to prevent the contents of the flask from being drawn into the condenser.

Supplier: Glassco

Adapters feature an inner joint and a 90° hose connection.

Supplier: Glassco

Adapters have a thread at the top for use with a compression cap and O-Ring.

Supplier: Glassco

Flasks feature a 2mm glass stopcock and a spring retention device for smooth turning purpose.

Supplier: Glassco

Bushing adapters allow for compact assemblies of dissimilar joints.

Supplier: Glassco

Adapters feature a straight hose connection at top and male joint.

Supplier: Glassco

Round bottom flask with joints

Supplier: Glassco

Enlarging adapters are useful for attaching apparatus with one joint size to equipment having a larger joint size.

Supplier: Glassco

Condensers feature standard taper inner joint at bottom and reinforced standard taper outer joint at top.

Supplier: Glassco

Separating funnels are available with either glass or PTFE stopper.

Supplier: Glassco

This inlet adapter is equipped with a vaccum take-off and drip tip.

Supplier: Glassco

The trap of this adapter provides expanded volume for reactions that have a tendency to foam excessively.

Supplier: Glassco

This Distillation Adapter is also designed for use as a rotary evaporator washer.

Supplier: Glassco

This vacuum adapter features a hose connection and stopcock.

Supplier: Glassco

Adapter features two hose connections 180° from one another.

Supplier: Glassco

Stoppers are made from Borosilicate 3.3 glass.

Supplier: Glassco

Reducing adapters are used for connecting dissimilar standard taper joints.

Supplier: Glassco

This vacuum adapter features an outer standard taper joint.

Supplier: Glassco

Heavy wall design with single neck

Supplier: Glassco

Adapter is equipped with a standard taper inner joint at each end.

Supplier: Glassco

Supplier: Glassco

Extractor body only.

Supplier: Glassco

Inlet adapters permit the insertion of plain stem thermometers or bleed tubes.

Supplier: Glassco

Distilling Receivers have a 135° angle between the center line of the condenser and the receiver tubes

Supplier: Glassco

Distribution adapter, 24/40, Cow-type design features three receivers spaced 40° apart.

Supplier: Glassco

This trap adapter is placed above the flask to prevent carry-over of reactions which have a tendency to foam.

Supplier: Glassco

General-purpose column features a PTFE stopcock, a top outer joint, and a coarse porosity fritted disc to support column packing.

Supplier: Glassco

The flushing adapter is used to flush and fill attached vessels.

Supplier: Glassco

Plastic joint clips.

Supplier: Glassco

Flasks are manufactured from Borosilicate 3.3 glass.