Supplier: Labconco

Guardian™ airflow monitors continuously check the face velocity of laboratory hoods and enclosures and alert the operator to airflows that drop outside preset levels with audible and visual alarms. The audible alarm can be muted at the touch of a switch.

Supplier: Labconco

SpillStopper* Work Surface, 4ft w x 30in d, no cutouts, molded of corrosion-resistant solid epoxy. Dished & contoured to conform to interior liner of Protector Pass-Through Hoods. Pre-drilled 2.5in (6.4cm) dia plumbing holes.

Supplier: Labconco

Kit includes a 7.6x15.2cm (3x6") polypropylene cupsink and chrome turret

Supplier: Labconco

Testing confirms the Protector XL floor-mounted laboratory hoods with vertical-rising sashes meet the SEFA-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm.

Supplier: Labconco

Long Gun Holder kit, Stainless steel unit provides 5 U-shaped cradles for long guns to be held securely. Holder locks into existing sidewall brackets. CApture BT can accommodate 15 long guns (3 Kits). For use with CApture BT Fuming Chamber

Supplier: TrippNT

TrippNT's Fume Hood Shelves come in three sizes in either PVC plastic or extra tough high density polyethylene (HDPE) to keep your hood neat and clean and safe.

Supplier: Labconco

ClassMate™ laboratory hoods are designed to meet the needs of instructional laboratories.

Supplier: Labconco

For Radioisotopes, contains 10# of impregnated charcoal.

Supplier: Labconco

For venting cabinet through work surface and into a fume hood.

Supplier: Labconco

SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins

Supplier: Eagle Group

Stainless steel laboratory exhaust canopies are used to exhaust laboratory work spaces.

Supplier: Labconco

Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.

Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.

The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station,

Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.

Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor.

Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.

For assistance, contact your local sales representative

Supplier: Labconco

The Basic™ hood is ideal for rooms with ceilings below 2.4 m, 8" and for shallow countertops.

Supplier: Labconco

The AtmoSense™ moisture monitor is designed for general purpose trace moisture detection as low as 0 to 20 ppm.

Supplier: Movex

Square Hood For 3 In Diameter Extractor

Supplier: WaterSaver Faucet

Since isotope hoods do not have interior access panels, they require a front load fitting that can be accessed from outside the hood

Supplier: Justrite

Justrite™ laboratory safety cabinets are ideal for use with fume hoods.

Supplier: Labconco

Wings reduce the sash opening area to increase face velocity at the 16" sash stop position from 60 fpm to 100 fpm, and 17" depth.

Supplier: Labconco

The AtmoSense™ Oxygen monitor is designed for general purpose trace oxygen detection as low as 1 ppm.

Supplier: Labconco

Popular models of Protector® Premier® Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment

Supplier: Labconco

Popular models of Protector XStream Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment

Supplier: Scientific Plastics

Designed for neutralization and dilution procedures in fume hood cabinets or any area where space is a concern

Supplier: Labconco

Specifically designed to solve unique ventilation problems, this canopy hood vents nontoxic materials such as heat, steam, and odors from large or bulky equipment.

Supplier: Labconco

Solid epoxy work surfaces are 3.2cm (1¹/₄") thick, 65.7cm (25⁷/₈") deep, and dished to contain spills.

Supplier: Bel-Art Products, a Part of SP

A quick, easy way to test the safety of fume hood exhaust before use.

Supplier: VWR International

Chemical-resistant, maintenance-free, polyethylene containment tray eliminates spills and holds 1.25L (42.3 oz.) of spilled liquid.

Supplier: Labconco

Fabricated from vacuum formed unplasticized Type 1 polyvinyl chloride (PVC) and made specifically to handle extremely corrosive atmospheres, these blowers provide optimum chemical resistance to high order oxidizers such as perchloric acid. PVC blowers have a dry powder epoxy-coated base and weather cover for complete protection in extreme weather. Impellers are made of injection molded PVDF to resist highly corrosive atmospheres.

Supplier: Labconco

The AtmoSense™ Oxygen monitor is designed for general purpose trace oxygen detection as low as 1 ppm.

Supplier: Labconco

Guardian Digital Airflow Monitors alert the operator to low airflow conditions

Supplier: Thermo Fisher Scientific

Designed for remote control operation in fume hoods or other corrosive environments.