256 Results for: "Contec"
EasySat™ Bucketless Floor Mops, Contec®
Supplier: Contec
Designed specifically for cleanroom use, this mop system completely eliminates the need for bucket or wringer.
Expand 6 Items
PREempt™ RTU Disinfectant Wipes, Contec®
Supplier: Contec
One-step disinfectant cleaner wipes utilizing Accelerated Hydrogen Peroxide®. Ideal for critical environments.
Expand 1 Items
PREempt™ RTU Disinfectant Solutions, Contec
Supplier: Contec
One-step disinfectant cleaner utilizing Accelerated Hydrogen Peroxide® (AHP).
Expand 2 Items
Amplitude™ Sigma™ Wipes, Contec®
Supplier: Contec
Amplitude™ Sigma™ Wipes are a hydroentangled blend of 55% cellulose and 45% polyester. They are highly sorbent, offering excellent durability and good cleanliness.
Expand 3 Items
SATWipes® Delta™ Wipes, Contec®
Supplier: Contec
SATWipes® Delta™ wipes consist of a perforated roll of saturated wipes dispensed through a center-pull canister. The wipes are 100% nonwoven polyester fabric creating a soft, durable, and clean wipe.
Expand 5 Items
SterileSorb™ Wipers, Contec®
Supplier: Contec
SterileSorb™ Wipes are a hydroentangled blend of 55% cellulose and 45% polyester. They are highly sorbent with excellent durability and good cleanliness. SterileSorb™ wipes are strong and durable wet or dry, making them excellent for use in general cleaning and spill pick up.
Expand 2 Items
PROSAT® Sterile Sigma™ Wipes, Contec®
Supplier: Contec
These PROSAT® sterile wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT® Sterile Sigma™ wipes offer a soft and durable wipe providing consistent solvent application.
Expand 1 Items
CONSTIX®, Sealed Polyester Swabs, SP-6 Series, Contec®
Supplier: Contec
CONSTIX® SP-6 sealed polyester swabs consist of 100% knit polyester fabric that is thermally bonded to a flex-tip polypropylene handle.
Expand 1 Items
Polynit Heatseal Wipes, Contec®
Supplier: Contec
Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean, non-abrasive edge that allows full utilization of the wipe surface.
Expand 13 Items
Anticon® Sterile 100™ Wipes, Contec®
Supplier: Contec
Anticon® Sterile 100™ are the sterile version of Anticon 100® HeavyWeight™ wipes. They are made from 100% continuous filament polyester with a double-knit, no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching.
Expand 1 Items
Polywipe-C Heatseal Wipes, Contec®
Supplier: Contec
Polywipe-C heatseal wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe.
Expand 6 Items
CONSTIX®, Sealed Foam Swabs, SF-5 Series, Contec®
Supplier: Contec
CONSTIX® SF-5 swabs consist of a polyurethane foam head bonded to a flex-tip polypropylene handle without the use of adhesives or binders.
Expand 1 Items
CONSTIX®, Electrostatic Dissipative Swabs, SF-13ESD Series, Contec®
Supplier: Contec
CONSTIX® SF-13 ESD static-safe swabs consist of a pointed-tip, sealed foam head attached to a conductive polymer handle.
Expand 2 Items
VertiKlean® Wall Washing Systems
Supplier: Contec
Lightweight, polyester disposable mops are excellent for applying disinfectants and for wet cleaning of vertical surfaces, ceilings, and walls in controlled environments. Ideal for reaching awkward corners and ceilings with a complete range of motion.
Expand 14 Items
PROSAT® Sterile Polynit Heatseal Wipes
Supplier: Contec
PROSAT® Sterile Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning. They are laundered and packaged in an ISO Class 4 cleanroom.
Expand 5 Items
Quiltec® I Wipers
Supplier: Contec
Quiltec® I Wipes offer the highest sorptive capacity of any sealed edge wipe available. They are manufactured using two layers of knitted polyester fabric that are laminated together to form a stronger, more adsorbent wipe. Additional fluid is captured within the quilted pockets between the fabric layers, increasing the sorbent capacity. Quiltec® I have more than twice the adsorbent capacity of a single-layer wipe.
Expand 8 Items
ProKlean Surface Cleaner
Supplier: Contec
Stabilized hypochlorous acid blended with purified water.
Expand 1 Items
Polypropylene Bucket System, Contec®
Supplier: Contec
Fully autoclavable polypropylene rolling cart with two 6.5 gallon (25 l) buckets and wringer.
Expand 1 Items
Bemcot® M-3 Wipes, Contec®
Supplier: Contec
The Bemcot® M3 Wipe features 100% rayon nonwoven fabric. As the wipe only contains rayon, it is extremely absorbent.
Expand 1 Items
PeridoxRTU® Sporicidal Disinfectant and Cleaner, Contec
Supplier: Contec
PeridoxRTU® is a broad spectrum EPA registered sporicide, bactericide, virucide, tuberculocide, and fungicide one-step disinfectant and hard surface cleaner with a 3-minute Sporicide claim at 99.9999% efficacy. It contains no alcohol or bleach and, unlike most other disinfectants, leaves minimal residue on surfaces.
Expand 3 Items
PROSAT® Sterile Polywipe-C Heatseal Wipes, Contec®
Supplier: Contec
100% interlock knit standard weight textured polyester wipes presaturated with 70% USP grade IPA and 30% DI water.
Expand 2 Items
CONSTIX®, Cotton Swabs, SC-9 Series, Contec®
Supplier: Contec
CONSTIX® SC-9 round cotton swabs consist of high-quality, long staple-length cotton, tightly wrapped and shaped on both ends of high strength, wood handle. The heads are held to the handles using a methyl-cellulose binder.
Expand 1 Items
PROSAT® Sterile Meltblown Polypropylene Wipes, Contec®
Supplier: Contec
PROSAT® Sterile Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. These wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.
Expand 1 Items
PROSAT® Theta™ Wipes, Contec®
Supplier: Contec
These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT® Theta™ wipes offer a soft and durable wipe providing consistant solvent application.
Expand 1 Items
Polynit Wipers, Contec®
Supplier: Contec
Polynit Wipes are made of 100% knitted textured polyester with knife cut edges for a very soft wipe. The soft edge is ideal for use on surfaces which are vulnerable to scratching.
Expand 6 Items
PROSAT® Presaturated Nonwoven Wipers, Contec®
Supplier: Contec
Nonwoven wipers designed for cleaning laminar flow workbenches, cleanroom surfaces, and equipment.
Expand 2 Items
QuickTask™ Flat Mops, Contec®
Supplier: Contec
The QuickTask™ product line consists of a variety of knitted polyester, polyester/cellulose, microfiber/foam, and microfiber flat mop heads that are easily installed onto a hinged mop head frame and handle assembly.
Expand 9 Items
Bucket Liners, Irradiated, Contec
Supplier: Contec
Irradiated bucket liners to fit 20, 25, and 27 liter Contec Mop buckets. Made of low-density polyethylene (LLDPE) film.
Expand 1 Items
Edgeless® Mop Systems, Contec®
Supplier: Contec
Edgeless® Mops are made from strong, durable knitted polyester, eliminating contamination from breakage and deterioration common with cotton and rayon string mops. Cleanroom laundered Edgeless® Mops are made from a continuous tube of 100% polyester knitted fabric looped to form mop strands that will not shed or break.
Expand 10 Items
VertiKlean® MAX™ Mopping Systems, Contec®
Supplier: Contec
VertiKlean® MAX™ Mop was designed for applying disinfectants to both horizontal and vertical surfaces, and is ideal for general cleaning of ceilings, walls, and floors in the most critical environments. This durable, lightweight mop features a single layer hydrophilic polyurethane foam laminated to polyester microfiber fabric, backed by a semi-rigid thermoformed plate, which easily snaps onto a standard VertiKlean® mop frame.