You searched for: Fume Hoods and Enclosures
Fume hoods provide the necessary protection for both the working materials and personnel. These enclosures serve as barriers against exposure that could be detrimental to tests or health. Available in ducted or recirculating formats, the front sash may be moveable and is constructed from clear safety glass for easy observation. Incorporated fans guarantee airflow remains constant and is pushed through high-quality filters to remove fumes or vapors.
Nexus™ Horizontal Clean Bench, 6' Wide
Supplier: Labconco
Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.
Expand 32 Items
Nexus™ Horizontal Clean Bench, 3' Wide
Supplier: Labconco
Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.
Expand 31 Items
REDISHIP Purifier® Logic®+ Class II A2 Biosafety Cabinets, Labconco®
Supplier: Labconco
REDISHIP Purifier logic+ class II A2 biosafety cabinets use the same ECM blower technology as the Purifier Logic®, the Logic+ and use the constant Airflow Profile™ (CAP) to maintain a precise volume of air as the filters load.
Expand 16 Items
Electrical Receptacle Kits for Basic™ Laboratory Hoods, Labconco®
Supplier: Labconco
Kits include electrical receptacle, junction box, receptacle cover plate, and installation instructions
Expand 2 Items
Protector® XStream® I-S™ Laboratory Fume Hoods, Labconco
Supplier: Labconco
High performance fume hoods with integrated sash sensors for automatic multi-speed blower control.
Expand 8 Items
Protector® Radioisotope Laboratory Hoods, Labconco®
Supplier: Labconco
Designed to give maximum protection for radiochemical applications.
Expand 40 Items
Protector® Echo™ Filtered Fume Hoods with Side Windows, Labconco Corporation
Supplier: Labconco
Fully-featured, energy-efficient fume hood provides an environmentally-friendly solution to ducted fume hoods while simplifying installation.
Expand 80 Items
SpillStopper Work Surfaces, Labconco
Supplier: Labconco
SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins
Expand 46 Items
AtmoSense™ Oxygen Monitor, Labconco®
Supplier: Labconco
The AtmoSense™ Oxygen Monitor is designed for general purpose trace oxygen detection as low as 1ppm
Expand 1 Items
SpillStopper™ Work Surfaces for Protector® ClassMate™ Laboratory Hoods, Labconco®
Supplier: Labconco
Solid epoxy work surfaces are 3.2cm (11/4") thick, 65.7cm (257/8") deep, and dished to contain spills.
Expand 27 Items
Cupsink and Turret Kit for Basic™ Laboratory Hoods, Labconco®
Supplier: Labconco
Kit includes a 7.6x15.2cm (3x6") polypropylene cupsink and chrome turret
Expand 1 Items
Canopy Hood, Labconco®
Supplier: Labconco
Specifically designed to solve unique ventilation problems, this canopy hood vents nontoxic materials such as heat, steam, and odors from large or bulky equipment.
Expand 2 Items
Protector® Echo™ Filtered Fume Hoods with No Windows, Labconco Corporation
Supplier: Labconco
Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation.
Expand 80 Items
Protector® ClassMate™ Laboratory Hoods, Labconco®
Supplier: Labconco
ClassMate™ laboratory hoods are designed to meet the needs of instructional laboratories.
Expand 30 Items
Protector® XL™ Floor-Mounted Laboratory Hoods with Vertical Sashes, Labconco
Supplier: Labconco
Testing confirms the Protector XL floor-mounted laboratory hoods with vertical-rising sashes meet the SEFA-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm.
Expand 12 Items
Protector® PVC Perchloric Acid and Acid Digestion Laboratory Hoods, Labconco®
Supplier: Labconco
Recommended whenever perchloric acid is used in combination with other corrosive inorganic reagents.
Expand 40 Items
Basic 47 and 70 Fume Hoods
Supplier: Labconco
Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.
Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.
The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station,
Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.
Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor.
Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.
For assistance, contact your local sales representative
Expand 6 Items
Protector® Premier® Laboratory Hoods, Labconco®
Supplier: Labconco
Labconco Protector® Premier® fiberglass fume hoods have a one-piece liner of specially-formulated, fiberglass-reinforced polyester, which offers corrosion and fire resistance and easy clean up.
Expand 31 Items
AtmoSense™ Moisture Monitor, Labconco®
Supplier: Labconco
The AtmoSense™ Moisture Monitor is designed for general purpose trace moisture detection as low as 0–20ppm
Expand 1 Items
Protector® Premier® I-S™ Laboratory Fume Hoods, Labconco Corporation
Supplier: Labconco
High performance fume hoods with integrated sash sensors for automatic multi-speed blower control.
Expand 8 Items
Solid Epoxy Flat Work Surfaces, Labconco®
Supplier: Labconco
Combine with a base stand or cabinet to support Fiberglass 30 and Basic™ Labconco® laboratory hoods.
Expand 6 Items
Protector® Demonstration Hoods, Labconco®
Supplier: Labconco
Designed for classroom use, these lightweight hoods feature an epoxy-coated aluminum frame with tempered safety glass front sash, sides, rear baffle, and top.
Expand 6 Items
Protector® Pass-Through Laboratory Hoods, Labconco®
Supplier: Labconco
Laboratory hoods feature sashes on two sides that, when mounted in an island or peninsular configuration, provide unobstructed viewing from either side during chemistry demonstrations or observing students using the hood
Expand 36 Items
Protector® XStream® Laboratory Hoods, Labconco®
Supplier: Labconco
The newly redesigned, patented Protector® XStream® Laboratory Hood was engineered to be the best containing fume hood possible
Expand 16 Items
Venturi V05-General Purpose Bench Fume Hood with Vertical Rising Sash, Kemglass Liner, Kewaunee Scientific
Supplier: Kewaunee
The Supreme Air Venturi provides the safest user-friendly fume hood manufactured today. The Supreme Air Venturi utilizes proven containment enhancing techniques coupled with innovative laboratory convenience features, including: adjustable LED lights, electromechanical sash stops, ultra-smooth sash system, and push button sash management.
Expand 1 Items
Protector® Echo™ Filtered Fume Hood, Labconco
Supplier: Labconco
The Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that requires NO DUCTING! The Protector® Echo™ Filtered Fume Hood features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings, fiberglass-reinforced panel liner, fully closing sash, electrical receptacles and service fixtures.
Expand 1 Items
Protector® Stainless Steel Perchloric Acid Laboratory Hoods, Labconco®
Supplier: Labconco
Interior is one piece, Type 316 stainless steel with integral work surface and drainage trough.
Expand 40 Items
Protector® Echo™ Floor-Mounted Filtered Fume Hoods, 37.7" Depth, Labconco Corporation
Supplier: Labconco
Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation. Ideal for oversized equipment.
Expand 80 Items
Protector® XL™ Floor-Mounted Laboratory Hoods with Horizontal Sashes, Labconco
Supplier: Labconco
Protector XL floor-mounted laboratory hoods with horizontal-sliding sashes are suitable for general chemistry applications and have the dimensions required for over-sized equipment.
Expand 12 Items
Protector® Echo™ Floor-Mounted Filtered Fume Hoods, 55.7" Depth, Labconco Corporation
Supplier: Labconco
Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation. Ideal for oversized equipment.