You searched for: Distillation Components
Distillation components are the parts required to build an efficient liquid purification apparatus. With a strong glass manufacturing, the pieces can withstand the process involved heating when separating mixture substances. Creating a closed system, the parts fit snugly together and grease easily to eliminate generated movement heat. Whether replacing broken pieces or modifying an existing apparatus for specific testing, the large selection of distillation components will meet application needs.
EiscoLabGlass® Vigreux Columns with Threaded Joint
Supplier: Wards
High quality Vigreux column used to separate vaporized mixtures of liquid compounds with close volatility.
Expand 3 Items
Distillation Column, Plain, DWK Lifesciences
Supplier: DWK Life Sciences (KIMBLE)
These columns are plain fractionating column with indents to support packing.
Expand 1 Items
PYREX® Distilling Adapter, Corning
Supplier: Corning
These PYREX® 60° angle distilling connecting adapters have a 24/40 Standard Taper outer joint at the upper end and inner 24/40 Standard Taper joints and on the sidearm and lower joints
Expand 1 Items
Claisen Adapters, Chemglass
Supplier: Chemglass
With [ST] joints on both top arms and on lower inner joint
Expand 2 Items
Distillation Adapters, Chemglass
Supplier: Chemglass
Adapters have a #7 Chem-Thread at the top for a vacuum-tight seal of plain stem thermometers.
Expand 2 Items
Distilling Heads, Chemglass
Supplier: Chemglass
Simple distillation head with a condenser sealed to the adapter at a 75° angle.
Expand 2 Items
Kjeldahl Distilling Trap Adapters, Varied [ST] Joints, Chemglass
Supplier: Chemglass
Adapter is placed above flask to prevent carry-over of reactions which have a tendency to foam.
Expand 2 Items
Synthware Distilling Receivers, Graduated, with Hooks
Supplier: Kemtech America
Centrifuge tube shaped receiver with an upper standard taper joint.
Expand 2 Items
Synthware Micro Distillation Head, Jacketed Vigreux, Kemtech America
Supplier: Kemtech America
With the Vigreux column vacuum jacketed to improve distillation performance.
Expand 1 Items
PYREX® Oil Dilution Distallation Receiver, [ST] Joints, Corning
Supplier: Corning
Distallation receiver to determine the amount of dilution in crankcase oils when gasoline has been used as fuel. Receiver design keeps heat-sensitive materials away from the hot base of the flask. Receiver has a [ST] 24/40 top outer joint and a [ST] 24/40 sidearm inner joint.
Expand 1 Items
Simple Distillation Apparatus
Supplier: Wards
This simple distillation apparatus is made up of boroscilicate glass.
Expand 1 Items
PYREX® Cyanide Distilling Apparatus, Corning
Supplier: Corning
Cyanide distilling apparatus made of PYREX® borosilicate glass to determine soluble and insoluble cyanides in water.
Expand 7 Items
Self-Evacuating Cash Still with Teflon® Stopcock, General Glass Blowing
Supplier: General Glass Blowing
The Self Evacuating Cash Still complies with the AOAC method to determine Acidity (Total Volatile) of wines. The steam chamber is heated by an 800 watt immersion coil that heats the distilled water to a boiling point in about 3 to 4 minutes.
Expand 1 Items
Airfree® Schlenk Solvent Distillation Apparatus, without Adapter, Chemglass
Supplier: Chemglass
Similar in design to the AF-0720 solvent distillation apparatus, but without a delivery adapter.
Expand 1 Items
Distillation Receiver, Solvent Recovery, Graduated, Chemglass
Supplier: Chemglass
Graduated distillation receiver feature a 4 mm three way stopcock.
Expand 1 Items
Receiver, Moisture Test, Barrett-Type, Chemglass
Supplier: Chemglass
This moisture test receiver is used to determine the water content in petroleum and bituminous material.
Expand 9 Items
PYREX® Barrett Distilling Apparatus, with Stopcock and 24/40 Standard Taper Joints, Corning
Supplier: Corning
This PYREX® distilling apparatus is designed for determining water content in petroleum or bituminous products.
Expand 1 Items
Synthware Distilling Adapters, Bent 105°, Kemtech America
Supplier: Kemtech America
Synthware 105° bent distillation adapter.
Expand 3 Items
Synthware Distillation Receivers, Dean Stark
Supplier: Kemtech America
For easy separation of water from reaction or distillation system.
Expand 7 Items
Synthware Distilling Receivers, Kemtech America
Supplier: Kemtech America
With 135° angle between top outer joint and lower inner joints.
Expand 1 Items
PYREX® Solvent Recovery Head, Corning
Supplier: Corning
Made of PYREX®, borosilicate glass.
Expand 1 Items
Distillation Adapters, with Tooled Rubber Fitting, Chemglass
Supplier: Chemglass
Adapters have a tubulation at the top for use with rubber fitting.
Expand 3 Items
Distilling Adapter, Chemglass
Supplier: Chemglass
Adapter is used to connect a distilling column with vertical condensers.
Expand 1 Items
Distilling Head, Micro, Vigreux, Jacketed, Chemglass
Supplier: Chemglass
Similar to CG-1241 but with the Vigreux column vacuum jacketed to improve distillation performance.
Expand 1 Items
Distilling Receivers, Moisture Test, Overflow Tube, Dean-Stark, Chemglass
Supplier: Chemglass
Distilling receivers feature a overflow tube.
Expand 3 Items
Distillation Receiver, Graduated, Chemglass
Supplier: Chemglass
Cow type receiver has a single standard taper outer joint at the top.
Expand 1 Items
Synthware Solvent Still with High Vacuum Valves, Kemtech America
Supplier: Kemtech America
Designed to provide excellent solvent and chemical resistance, the still is equipped with two 0-4 mm high vacuum valves.
Expand 1 Items
Synthware Solvent Still Head, Kemtech America
Supplier: Kemtech America
Similar to repurification solvent still (see 60004-750 series), the solvent still head features a drip tip on the delivery port in addition to the [ST] 14/20 inner joint.
Expand 2 Items
KONTES® Distillation Column, Vigreux, Kimble Chase
Supplier: DWK Life Sciences (KIMBLE)
Vigreux distilling column with indentations over the entire length for improved vapor-liquid contact.
Expand 5 Items
Solvent Still Heads, With PTFE Stopcock, Chemscience, SATI International Scientific
Supplier: CHEM SCIENCE INC CA
Syringe port has 14/20 outer joint for a rubber septum and a 4 mm PTFE stopcock.