You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Upchurch Scientific® Flat-Bottom Fittings, For Tubing Ø > ¹/₈" (3.2 mm), IDEX Health & Science
Supplier: Upchurch Scientific
Large Bore Fittings are designed for use with 5/16-24 or 1/2-20 thread port configurations and can be used with 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3.0 mm, or 4.0 mm OD tubing, depending on the fitting combination used.
Expand 3 Items
Upchurch Scientific® Coned Port Fittings, For Tubing Ø = ¹/₁₆" (1.6 mm), IDEX Health & Science
Supplier: Upchurch Scientific
RheFlex® Two-Piece Fingertight PEEK™ fittings provide inert, biocompatible connections for instrumentation
Expand 23 Items
Ferrules for Micropacked Columns, Compact—for Agilent 5890/6850/6890/7890 GCs, Restek
Supplier: Restek
Ferrules are designed for use with micropacked columns in Agilent 5890/6850/6890/7890 GCs
Expand 2 Items
Upchurch Scientific® Coned Port Fittings, For Tubing Ø ≤ ¹/₁₆" (1.6 mm), IDEX Health and Science
Supplier: Upchurch Scientific
FlushNut™ Fittings are designed for tight-space applications where nut heads often interfere with each other
Expand 3 Items
KIMBLE® BEVEL-SEAL™ Adapters Replacement Parts, DWK Life Sciences
Supplier: DWK Life Sciences (KIMBLE)
Polypropylene replacement caps for connecting adapters.
Expand 2 Items
Restek Enhanced Capillary Nut for Shimadzu 17A, 2010, and 2014 GCs, Restek
Supplier: Restek
Restek's enhanced design for the capillary nut eliminates the slot, increasing lifetime and durability.
Expand 1 Items
Valco® Adapter Ferrules, ¹/₃₂", Valcon Polyimide, Restek
Supplier: Restek
Fused silica adaptor ferrules are made from Valcon polyimide, a unique, graphite-reinforced composite specially prepared to maximize mechanical stability at temperatures up to 350°C.
Expand 3 Items
Standard Ferrules for PerkinElmer GCs, Fit ≤0.28 mm int.Ø Fused Silica Columns, Restek
Supplier: Restek
Standard ferrules fit fused silica columns with internal diameters ≤0.28 mm.
Expand 4 Items
Upchurch Scientific® Flat-Bottom Fittings, For Tubing Ø > ¹/₁₆" (1.6 mm) and ≤ ¹/₈" (3.2 mm), IDEX Health and Science
Supplier: Upchurch Scientific
FlushNut™ Fittings are designed for tight-space applications where nut heads often interfere with each other
Expand 23 Items
OPTI-LOK™ Low Pressure Fittings
Supplier: Optimize
OPTI-LOK LP Fittings are an excellent choice for making low-pressure connections into ¹/₄-28 ports. Connections to flat-bottomed ports can be made using OPTI-LOK flat-bottomed ferrules for ¹/₁₆ or ¹/₈" tubing without the need for pre-flanged tubing ends. OPTI-LOK LP Fittings are precision machined to deliver leak-free, zero-dead-volume connections every time. We also offer ¹/₄-28 unions in various through-hole sizes for joining flat-bottom fittings.
Expand 24 Items
FCS2® Low Dead Volume Top Adapter, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The white, top portion of a FCS2® that is equipped with 0.5 mm I.D
Expand 1 Items
Male Pipe to Valco® Internal Adapter, Restek
Supplier: Restek
These adapters make a minimum-volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.
Expand 2 Items
PTV Inlet Adapter Kit for Gerstel CIS 3 and CIS 4 PTV Inlets, Restek
Supplier: Restek
PTV inlet adapter kits are suitable for 0.25 mm and 0.32 mm ID columns.
Expand 1 Items
Extended Capillary Column Nuts for Agilent 5890/6850/6890/7890 GCs, Restek
Supplier: Restek
Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.
Expand 5 Items
DrumQuik PRO Series Drum and Tote, Dip Tube and Connection Technology, Colder Products Company
Supplier: Colder Products
Engineered to provide safe, secure container change outs with a quick connect and disconnect technology and integrated dip tube
Expand 4 Items
PLC Series Plastic Couplings, Colder Products Company
Supplier: Colder Products
These quick disconnect couplings are injection molded from acetal thermoplastic, making them highly durable and resistant to most chemical solutions
Expand 8 Items
EXP® Hand-Tight Coupler (EXP® Reusable Fittings for HPLC and UHPLC for 10-32 fittings and ¹/₁₆" tubing), Restek
Supplier: Restek
Restek is pleased to offer the reusable EXP® fitting system from Optimize Technologies for the ultimate in easy, reliable LC connections.
Expand 1 Items
KIMBLE® Flex Shaft Adapters, DWK Life Sciences
Supplier: DWK Life Sciences (KIMBLE)
This convenient stainless-steel universal joint with ⁵/₁₆" O.D. shaft and polyacetal adapter connects stirrer shafts to stirrer motors.
Expand 1 Items
FCS2® Open Mode Adapter, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The white, top portion of a FCS2® without perfusion ports, which enables the FCS2® to be assembled without the microaqueduct slide
Expand 1 Items
Micropacked Inlet Conversion Kits, Restek
Supplier: Restek
Use micropacked inlet conversion kits to convert capillary GC split/splitless inlets for use with 1/16" OD micropacked columns.
Expand 4 Items
Vaplock™ Tubing Connection Adapters, Cole-Parmer
Supplier: Argos Technologies
For liquid-tight connection of semi-rigid tubing (1/16" to 3/16" O.D.) to 1/4" NPT ports.
Expand 8 Items
Vacuum Hose Nozzles, Edwards
Supplier: Edwards
Used for connecting flexible vacuum tubing to pumping systems
Expand 2 Items
2-Port Vent Assembly, Straight, GL 45, Universal, 316L Electro Polished Stainless Steel, Chemglass
Supplier: Chemglass
Universal vent port assembly is constructed of 316 L electro polished stainless steel. These port assemblies fit all types of spinner flasks, media bottles and vessels. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.
Expand 1 Items
EXP®2 Fitting Kits for Stainless Steel Tubing
Supplier: Optimize
Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.
Expand 6 Items
Elbows, Aluminum, Edwards
Supplier: Edwards
ISO size NW10 aluminum elbow, 90[degree].