You searched for: Retort Stands
Retort stands to hold burettes, flasks, and other labware during procedures are available at VWR. Sets include both stainless steel rod and base, constructed of your choice of plastic or cast iron. A polypropylene retort stand is offered for severe corrosive conditions. Bases of cast iron coated with enamel are featured in rectangular, tripod, U-shaped and A-shaped options. Different rod lengths for the support of different diameters of labware are also supplied through VWR, as well as retort rings and clamps.
Economy Alcohol Burner Stand
Supplier: United Scientific Supplies
This rugged wire support stand has a heavy wire gauze top.
Expand 1 Items
Deluxe Support Stand
Supplier: United Scientific Supplies
Support stand that ensures the stand stays firmly in place.
Expand 4 Items
Support Stand and Ring Sets, United Scientific Supplies
Supplier: United Scientific Supplies
Each set contains a stamped steel base and a zinc-plated steel rod, along with 2, 3, 4, or 5 cast iron rings with clamps.
Expand 4 Items
Double Funnel Holder, United Scientific Supplies
Supplier: United Scientific Supplies
Suspend two funnels simultaneously using this polypropylene holder.
Expand 1 Items
Holder for Rugged Rotator, 75 to 200 mm Test Tubes, Glas-Col
Supplier: Glas-Col
Double duty holder for bottles and flasks.
Expand 1 Items
Adjustable Funnel Stand
Supplier: Wards
Crafted from polished wood, this stand with a 1.5" hole diameter and a height of 17" provides stability and convenience for various funnel applications.
Expand 1 Items
Support Stands, Humboldt Manufacturing
Supplier: Humboldt Manufacturing
Cast iron base, black enamel finish, plated steel rod. Bore size: 127x203mm. Rod size: 10mmx50.8cm.
Expand 1 Items
Eisco Rectangular Retort Bases, Steel
Supplier: Wards
Economical Retort Bases with tapped rod hole made of powder-coated pressed steel.
Expand 4 Items
Holders for Nutating Shakers, Separatory Funnel, Glas-Col
Supplier: Glas-Col
Specially designed for our floor model and mid range shakers.
Expand 3 Items
Eisco Heavy-Duty Rectangular Retort Bases, Cast Iron
Supplier: Wards
Low profile, heavy-duty Retort Bases made of chemically-resistant cast iron with a smooth coating.
Expand 2 Items
Triangular Supports with Rods
Supplier: United Scientific Supplies
Heavy cast-iron triangular bases.
Expand 3 Items
Triangular Base and Rod Assembly
Supplier: Wards
Sturdy assembly for all of your laboratory needs.
Expand 2 Items
Cassette Sampling Stand, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Sampling stand used to support sampling cassettes at elevated levels
Expand 1 Items
A-Frame Base with Rod
Supplier: Wards
These cast-iron bases have three-point stability on nearly any surface.
Expand 2 Items
Separatory Funnel Holder, United Scientific Supplies
Supplier: United Scientific Supplies
Open design allows an unobstructed view.
Expand 1 Items
Support Stands with Rods and Rings
Supplier: Shiv Dial Sud & Sons
Support Stands with Rods and Rings
Expand 3 Items
Eisco Triangular Retort Bases
Supplier: Wards
Cast iron Triangular Retort Stand with center-tapped hole for maximum stability in minimum footprint.
Expand 3 Items
Metalware Rod and Clamp Set, Eisco Scientific
Supplier: Wards
A basic, three piece rod and clamp set useful in all science laboratories.
Expand 1 Items
Cast Iron Triangular Support Stands with Rods, United Scientific Supplies
Supplier: United Scientific Supplies
Heavy cast-iron triangular bases.
Expand 4 Items
Stamped Steel Support Stands with Rods, United Scientific Supplies
Supplier: United Scientific Supplies
Stamped steel bases, with black enamel finish.
Expand 4 Items
Stamped Steel Two-Hole Support Stands with Rods, United Scientific Supplies
Supplier: United Scientific Supplies
Tip-free stability for experiments.
Expand 4 Items
Hardwood Double Burette Stand
Supplier: Wards
Double burette stand crafted from seasoned hardwood.
Expand 1 Items
Eisco A-Shaped Retort Bases with Leveling Screws
Supplier: Wards
A-Shaped Base with leveling screws for optimized stability made of chemically-resistant cast iron.
Expand 3 Items
Steel Ring Support Plate
Supplier: Wards
Steel ring support plate with a 3.75" diameter, offers a stable and heat-resistant surface for holding glassware and other lab equipment during heating or chemical reactions.
Expand 1 Items
Triangular Support Stand
Supplier: Humboldt Manufacturing
Triangular Support Stand
Expand 1 Items
Support Stand for CHEMRxnHUB™ Bench Top Reactors, Chemglass
Supplier: Chemglass
This unique stationary reactor stand is designed to fit into most benchtop hoods
Expand 3 Items
Medical Stands, Lakeside®
Supplier: Lakeside
Infection control, safety and ease-of-use are the design features of the IV stands
Expand 9 Items
Eisco Rectangular Retort Bases, Cast Iron
Supplier: Wards
Heavy Retort Bases with tapped rod hole made of chemically-resistant coated cast iron.
Expand 4 Items
Hoffman Electrolysis Metal Stand
Supplier: Wards
Measuring 24" in overall height, this metal stand with support clamps provides stability and versatility for Hoffman electrolysis experiments.