High form, borosilicate glass open vessels coated with Ace Instatherm®

Three-prong connector plug is designed to work with Ace temperature controllers where the output voltage can be automatically limited to match the bath. Bath can also be matched with ACE temperature thermocouple sensors for complete automatic operation. If using another type temperature controller, voltage should not exceed the rated voltage (stated below).

Caution: Never run Instatherm® baths dry or breakage can occur, especially at higher temperatures.

Accommodates larger and taller vessels. Designed to operate up to 250°C, heating response time is very rapid, (5° per minute), with very low thermal lag. The bottom is uncoated so the bath can be put on any popular magnetic stirrer for stirring while heating. A thermocouple well is imbedded in the insulation in this series. Baths are designed to run with oil or a heating media.