You searched for: Fittings and Connectors

Supplier: Chemglass

Beaded pipe to sanitary fitting adapter connects to the 1.5" beaded pipe side arm of CG-1968-GL zero dead space drain valve.

Supplier: Cadence Science

Made of inert PEEK and designed for quick, leak-proof connections.

Supplier: Restek

Septum nuts are for use with Agilent 5890/6850/6890/7890 split/splitless injectors.

Supplier: Argos Technologies

Liquid-tight tubing connections for 1/4-28 and 5/16-24 ports.

Supplier: Trajan Scientific and Medical

SGE understands today’s chromatographers need to move from tubing based flow systems to planar microchannel systems to deliver flexible chromatography solutions

Supplier: Colder Products

Couplings allow rapid disconnect and reconnect with one hand and without the need for tools

Supplier: Restek

Fused silica adapter ferrules are made from Valcon polyimide, a unique, graphite-reinforced composite specially prepared to maximize mechanical stability at temperatures up to 350°C.

Supplier: Optimize

OPTI-LOK LP Fittings are an excellent choice for making low-pressure connections into ¹/₄-28 ports. Connections to flat-bottomed ports can be made using OPTI-LOK flat-bottomed ferrules for ¹/₁₆ or ¹/₈" tubing without the need for pre-flanged tubing ends. OPTI-LOK LP Fittings are precision machined to deliver leak-free, zero-dead-volume connections every time. We also offer ¹/₄-28 unions in various through-hole sizes for joining flat-bottom fittings.

Supplier: DWK Life Sciences (KIMBLE)

Adapters are designed for use in chromatography applications with a luer to hose barb connection.

Supplier: Ohio Valley

Features linear tapers of a minimum angle, 1:1 split ratio, narrow angle between output legs for less column strain and low dead-volume

Supplier: Argos Technologies

Barbed fittings are an economical means of connecting soft-wall tubing to manifold ports.

Supplier: Chemglass

Adapters, air inlets/outlets, overlay aeration, for bioreactors.

Supplier: BIOPTECHS INC.

These 9 mm thick internally and externally threaded polymer rings are to be placed between an objective and nosepiece to inhibit thermal conductivity.

Supplier: Restek

Ferrules are designed for use with micropacked columns in Agilent 5890/6850/6890/7890 GCs

Supplier: BIOPTECHS INC.

The white, top portion of a FCS2® that is equipped with 0.5 mm I.D

Supplier: Restek

These adapters make a minimum-volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.

Supplier: Restek

PTV inlet adapter kits are suitable for 0.25 mm and 0.32 mm ID columns.

Supplier: Restek

Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.

Supplier: Restek

Restek is pleased to offer the reusable EXP® fitting system from Optimize Technologies for the ultimate in easy, reliable LC connections.

Supplier: Trajan Scientific and Medical

Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. SGE brings technology and chromatography expertise to improve your chromatography. SGE manufactures an array of connection types for GC use. Poorly defined or selected connections can lead to an increase in dead volume, leaks from cycled temperatures and mismatched tubing sizes.

Supplier: Restek

Use micropacked inlet conversion kits to convert capillary GC split/splitless inlets for use with ¹/₁₆" OD micropacked columns.

Supplier: Chemglass

Universal vent port assembly is constructed of 316 L electro polished stainless steel. These port assemblies fit all types of spinner flasks, media bottles and vessels. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.

Supplier: Edwards

Used for connecting flexible vacuum tubing to pumping systems

Supplier: Optimize

Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.

Supplier: Edwards

ISO size NW10 aluminum elbow, 90[degree].