You searched for: Fittings and Connectors

Supplier: Colder Products

AseptiQuik PPSU enables genderless connection for a greater range of chemical applications, offering versatile connections across downstream processes with a pH range from 2 to 12.

Supplier: Trajan Scientific and Medical

SGE understands today’s chromatographers need to move from tubing based flow systems to planar microchannel systems to deliver flexible chromatography solutions

Supplier: Colder Products

Couplings allow rapid disconnect and reconnect with one hand and without the need for tools

Supplier: Restek

Standard ferrules fit MXT® columns with internal diameters of 0.25 mm or 0.32 mm.

Supplier: Restek

Fused silica adapter ferrules are made from Valcon polyimide, a unique, graphite-reinforced composite specially prepared to maximize mechanical stability at temperatures up to 350°C.

Supplier: DWK Life Sciences (KIMBLE)

Adapters are designed for use in chromatography applications with a luer to hose barb connection.

Supplier: Restek

For use with Shimadzu 17A, 2010, and 2014 GCs

Supplier: Colder Products

These 3/8" pressure balanced, non-spill Quick Disconnect Couplings are intended for high purity and aggressive chemical applications

Supplier: Upchurch Scientific

RheFlex® Two-Piece Fingertight PEEK fittings provide inert, biocompatible connections for instrumentation

Supplier: Argos Technologies

Barbed fittings are an economical means of connecting soft-wall tubing to manifold ports.

Supplier: Restek

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 6 mL/min, Orifice Size: 0.0014in, Material: Siltek-Treated

Supplier: Ohio Valley

Features linear tapers of a minimum angle, 1:1 split ratio, narrow angle between output legs for less column strain and low dead-volume

Supplier: Chemglass

Male Luer lock with needleless injection site and swabable polycarbonate, silicone with lach samplers for bioreactors.

Supplier: Chemglass

Adapters, air inlets/outlets, overlay aeration, for bioreactors.

Supplier: Restek

Standard ferrules fit fused silica columns with internal diameters ≤0.28 mm.

Supplier: Upchurch Scientific

Upchurch Scientific® Quick Connect Luer Adapters by IDEX Health & Science adapt luers to 1/4-28, 10-32, 5/16-24, or M6 threaded ports.

Supplier: BIOPTECHS INC.

These 9 mm thick internally and externally threaded polymer rings are to be placed between an objective and nosepiece to inhibit thermal conductivity.

Supplier: Restek

Standard ferrules fit 0.28 mm ID MXT® columns.

Supplier: Colder Products

Stainless steel adapter engineered to ease the transition from stainless steel process pipe and equipment to single use disposable plastic.

Supplier: Optimize

The EXP Fitting System is the premier adjustable nut and ferrule compression fitting for extreme high-pressure connections between ¹/₃₂" or ¹/₁₆" tubing and any 6-32, 6-40 or 10-32 port.

Supplier: Restek

Ferrules are designed for use with micropacked columns in Agilent 5890/6850/6890/7890 GCs

Supplier: WaterSaver Faucet

Plugs have an internal shut-off valve that closes when the valve is disengaged.

Supplier: WaterSaver Faucet

The quick connect keying system is based upon the inner and outer diameters of the sleeves on the body and plug

Supplier: Trajan Scientific and Medical

Your chromatography analysis does not end with the selection of the GC column.

Supplier: Chemglass

Adapter fits into the headplate and has two connections that are 4 mm OØ to fit precision tubing size 16. Inside the reactor, the 4 mm tubes are 1.25" long.

Supplier: Restek

Made of clear anodized aluminum and high-quality stainless steel. One-piece design for ease of installation and removal.

Supplier: Restek

For use with split/splitless injectors on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL.

Supplier: Restek

Standard ferrules fit ID MXT® columns with internal diameters of 0.45 mm or 0.53 mm.

Supplier: Restek

Capillary columns are easier to install due to the nut protruding farther from the insulated injection port chamber.

Supplier: Upchurch Scientific

These unique Upchurch Scientific® tubing adapters connect peristaltic tubing to standard 1/16" or 1/8" OD tubing (using different fittings than are supplied with the product, available separately).