You searched for: Retort Stands
Retort stands to hold burettes, flasks, and other labware during procedures are available at VWR. Sets include both stainless steel rod and base, constructed of your choice of plastic or cast iron. A polypropylene retort stand is offered for severe corrosive conditions. Bases of cast iron coated with enamel are featured in rectangular, tripod, U-shaped and A-shaped options. Different rod lengths for the support of different diameters of labware are also supplied through VWR, as well as retort rings and clamps.
Laboratory Retort Stand with Ring Set
Supplier: Wards
This laboratory set includes a retort base made of corrosion resistant, powder coated steel, a stainless steel rod featuring a 10 mm x 1.5 mm metric thread and three cast iron support rings.
Expand 1 Items
A-Shaped Base Retort Stand
Supplier: Wards
This cast iron, powder-coated, A-shaped base includes a stainless steel rod.
Expand 3 Items
Support Stands, Humboldt Manufacturing
Supplier: Humboldt Manufacturing
Cast iron base, black enamel finish, plated steel rod. Bore size: 127x203mm. Rod size: 10mmx50.8cm.
Expand 1 Items
Deluxe Support Stand
Supplier: United Scientific Supplies
Support stand that ensures the stand stays firmly in place.
Expand 4 Items
Holders for Nutating Shakers, Separatory Funnel, Glas-Col
Supplier: Glas-Col
Specially designed for our floor model and mid range shakers.
Expand 3 Items
Rectangular Retort Stand, Rod, Clamp and Ring Set
Supplier: Wards
This laboratory set includes a retort base made of corrosion resistant, powder coated steel, a stainless steel rod featuring a 10 mm x 1.5 mm metric thread, a support ring and a three-pronged coated clamp.
Expand 1 Items
Triangular Support Stand
Supplier: Humboldt Manufacturing
Bases are cast iron with black enamel finish. Rods are zinc plated steel and threaded to fit into the base.
Expand 1 Items
Budget Tabletop Training IV Stand
Supplier: THE APPRENTICE CORPORATION
A low cost stand for holding fluid supplies for simulators.
Expand 1 Items
Support Stand and Clamps for Sonifier® Cell Disruptors, Branson Ultrasonics
Supplier: Branson Ultrasonics
The support stand with stainless steel rod accommodates Branson’s Sonifier® line and accessories
Expand 3 Items
Eisco T-Shaped Nesting Retort Bases, Cast Iron
Supplier: Wards
T-Shaped Retort Bases designed to nest closely to each other, made of chemically-resistant cast iron.
Expand 2 Items
Holder for Rugged Rotator, Test Tube, Glas-Col
Supplier: Glas-Col
Frequently used with the Rugged Rotator for embedding tissue for electron microscopy.
Expand 1 Items
Eisco Rectangular Retort Bases with Rubber Strips, Steel
Supplier: Wards
Premium Retort Bases with no-slip rubber strips and tapped hole made of powder-coated pressed steel.
Expand 3 Items
Rectangular Supports
Supplier: Humboldt Manufacturing
Tip-free stability for experiments.
Expand 3 Items
Stump Base
Supplier: Wards
Stump base featuring a 2.3" heavy-duty cast iron base in black, providing stability and support for various laboratory equipment and setups.
Expand 1 Items
Support Stand with Rod
Supplier: United Scientific Supplies
Weighted With Additional Steel Plate
Expand 2 Items
Separatory Funnel Holder, United Scientific Supplies
Supplier: United Scientific Supplies
Open design allows an unobstructed view.
Expand 1 Items
Metalware Rod and Clamp Set, Eisco Scientific
Supplier: Wards
A basic, three piece rod and clamp set useful in all science laboratories.
Expand 1 Items
Wood Funnel Support, Adjustable Bracket, Bennett Wood
Supplier: Bennett Wood Specialties
Holds six funnels
Expand 1 Items
Single Funnel Holder, United Scientific Supplies
Supplier: United Scientific Supplies
Tapered edges for a firm grip.
Expand 1 Items
Mighty Scope Dual View Stand, Aven Inc.
Supplier: Aven Tools
The Dual View Stand allows users to mount two Mighty Scopes
Expand 1 Items
Eisco Triangular Retort Bases
Supplier: Wards
Cast iron Triangular Retort Stand with center-tapped hole for maximum stability in minimum footprint.
Expand 3 Items
IV Stands, Blickman
Supplier: BLICKMAN INDUSTRIES
IV poles are available in high quality chrome and quality 304 stainless steel, and set on 4, 5 or 6 leg bases with casters, no projections and great balance/tip resistance.
Expand 35 Items
A-Base and Rod, Cast Iron, United Scientific Supplies
Supplier: United Scientific Supplies
Compact design to hold equipment securely.
Expand 1 Items
Graduated Cylinder Support, Accurate Wirecraft
Supplier: Accurate Wirecraft
Holds up to 25 cylinders and revolves for removal of dry cylinders.
Expand 1 Items
Eisco A-Shaped Retort Bases with Leveling Screws
Supplier: Wards
A-Shaped Base with leveling screws for optimized stability made of chemically-resistant cast iron.
Expand 3 Items
H-Shaped Retort Base
Supplier: Wards
H-shaped retort base with an 8×8" heavy-duty cast iron base in blue. The base ensures stability and strength for retort stands and setups in laboratory environments.
Expand 1 Items
Support Stand and Ring Sets, United Scientific Supplies
Supplier: United Scientific Supplies
Each set contains a stamped steel base and a zinc-plated steel rod, along with 2, 3, 4, or 5 cast iron rings with clamps.
Expand 4 Items
Double Funnel Holder, United Scientific Supplies
Supplier: United Scientific Supplies
Suspend two funnels simultaneously using this polypropylene holder.
Expand 1 Items
Hardwood Single Burette Stand
Supplier: Wards
Single burette stand crafted from seasoned hardwood.
Expand 1 Items
Support Stand for CHEMRxnHUB™ Bench Top Reactors, Chemglass
Supplier: Chemglass
This unique stationary reactor stand is designed to fit into most benchtop hoods