You searched for: Chemical Fume Hoods

Supplier: Kewaunee

The Supreme Air Venturi provides the safest user-friendly fume hood manufactured today. The Supreme Air Venturi utilizes proven containment enhancing techniques coupled with innovative laboratory convenience features, including: adjustable LED lights, electromechanical sash stops, ultra-smooth sash system, and push button sash management.

Supplier: Labconco

Testing confirms the Protector XL floor-mounted laboratory hoods with vertical-rising sashes meet the SEFA-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm.

Supplier: Labconco

The AtmoSense™ Oxygen Monitor is designed for general purpose trace oxygen detection as low as 1ppm

Supplier: Labconco

Laboratory hoods feature sashes on two sides that, when mounted in an island or peninsular configuration, provide unobstructed viewing from either side during chemistry demonstrations or observing students using the hood

Supplier: Labconco

The newly redesigned, patented Protector® XStream® Laboratory Hood was engineered to be the best containing fume hood possible

Supplier: Labconco

Designed for classroom use, these lightweight hoods feature an epoxy-coated aluminum frame with tempered safety glass front sash, sides, rear baffle, and top.

Supplier: Labconco

The AtmoSense™ Moisture Monitor is designed for general purpose trace moisture detection as low as 0–20ppm

Supplier: Labconco

Guardian Airflow Monitors are designed to continuously monitor airflow through Labconco fume hoods

Supplier: Labconco

ClassMate™ laboratory hoods are designed to meet the needs of instructional laboratories.

Supplier: Labconco

Specifically designed to solve unique ventilation problems, this canopy hood vents nontoxic materials such as heat, steam, and odors from large or bulky equipment.

Supplier: Kewaunee

These modified epoxy resin worktops are available with or without a 5.1cm (2") diameter vent hole

Supplier: Labconco

Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.

Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.

The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station,

Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.

Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor.

Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.

For assistance, contact your local sales representative

Supplier: Labconco

The Basic™ hood is ideal for rooms with ceilings below 2.4 m, 8" and for shallow countertops.

Supplier: Eagle Group

Stainless steel laboratory exhaust canopies are used to exhaust laboratory work spaces.

Supplier: WaterSaver Faucet

Since isotope hoods do not have interior access panels, they require a front load fitting that can be accessed from outside the hood