You searched for: Microplate Seals

Supplier: VWR International

These general purpose seals are ideal for use with polypropylene plates. They minimize evaporation and adhesive plate residue.

Supplier: VWR International

Aluminum foils for use with 96-well or 384-well plates. Foils offer excellent chemical resistance (DMSO).

Supplier: VWR International

These soft, non permeable 63.5 µm thick aluminium foils, with strong medical grade adhesive, eliminate the need for heat sealing devices or mats during thermal cycling.

Supplier: VWR International

Easier to apply and remove as compared to standard molded PCR strip caps.

Supplier: VWR International

These medium-density polyethylene films, 76µm thick with a 46µm thick adhesive layer, are designed for general-purpose microplate sealing and PCR.

Supplier: VWR International

Features an extra strong adhesive to minimize evaporation, yet removes easily without leaving a residue on the plate.

Supplier: VWR International

These films are 240 µm thick white vinyl with adhesive, for use with white microplates.

Supplier: VWR International

Precut aluminum foil seals on a roll for PCR applications. Supplied on a roll with holder for ease of use.

Supplier: VWR International

Transparent polyester films with strong, non absorbing, non fluorescing, medical grade adhesive for superior performance in qPCR applications. Supplied non sterile.

Supplier: VWR International

Adhesive sealing film or foil rolls constructed on plastic cores, for use with high throughput automated microplate sealers.

Supplier: VWR International

Sealing mats made of EVA (Ethylene Vinyl Acetate), suitable for square well plates.

Supplier: VWR International

The SealMate SealPlate Starter Kit features a re-usable dispenser and two sterile rolls of perforated film.

Supplier: VWR International

Easier to apply and remove as compared to standard molded PCR strip caps.

Supplier: VWR International

1x8 adhesive sealing strips are ideal for use with 1x8 strip-well ELISA plates.

Supplier: VWR International

Provide a safe, secure seal to minimize sample loss with VWR® Deep Well Storage Plates.

Supplier: VWR International

This 96-well septa sealing mat is a cost-effective alternative and is compatible with the ABI 3100.

Supplier: VWR International

These easily-pierceable 94.1 µm polyethylene films with acrylic adhesive allow direct sample recovery with single or multichannel pipettors and robotic probes.

Supplier: VWR International

50 µm polyolefin films with 50 µm inert encapsulated silicone adhesive. Especially suited for qPCR, storage and protein crystallisation applications. The encapsulated silicone adhesive is non tacky until pressed against the sealing surface, at which time adhesive is released only in sealing areas to form the strongest available heat resistant seal around each well on the plate.

Supplier: VWR International

Identical to polyester films above, but including a colour dot and white writing area on each end tab for plate identification.

Supplier: VWR International

Aluminium foils, 75.7 µm thick, for use with 96- or 384-well plates. Fit inside the rim of raised rim plates. These foils have one partial-width end tab. Available non sterile only.

Supplier: VWR International

Suitable for sealing microplates in incubation and storage applications, silicone sealing mats provide sample protection while minimizing evaporation in a wide range of temperatures.

Supplier: VWR International

Polyester seals feature a strong adhesive to minimize evaporation during PCR and storage applications.

Supplier: VWR International

VWR® 96-well covers are designed for chromatography and high throughput screening (HTS) applications.

Supplier: VWR International

Silicone. Seals 96-well round well plates to prevent evaporation during oil-free thermal cycling. Free of RNase, DNase, human DNA. Fits inside lid of thermal cycler. Use from -40[degree]C to 80[degree]C. Does not require application of sealing film. Color: natural.

Supplier: VWR International

Polyester 2×8 strip films are identical to polyester films in material and adhesive, but designed for sealing only one or two 8-well rows at a time on either strip-well plates or standard plates whenever rows must be selectively protected or accessed.

Supplier: VWR International

VWR® Heat Resistant Films are improved films for classic thermal cycling applications.

Supplier: VWR International

A 139.7 µm thick hydrophobic porous film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. These rayon films minimise cross-contamination, spillage and evaporation. They allow uniform air and CO₂ exchange for all wells, unlike plate lids which favour exchange for wells near plate edges. Sterile product is packaged in tamper evident bags of 25.

Supplier: VWR International

Polyester film, acrylic adhesive. These 49.5 µm thick polyester films minimise evaporation and prevent spillage and contamination between wells.

Supplier: VWR International

Aluminium foils with biologically inert adhesive. These foils are easily pierced by manual or automated pipette tips, for sample recovery without generation of aerosols or cross-contamination.

Supplier: VWR International

Re-usable cap mats are available for friction sealing of plates.