You searched for: Fittings and Connectors

Supplier: Colder Products

These 3/8" pressure balanced, non-spill Quick Disconnect Couplings are intended for high purity and aggressive chemical applications

Supplier: Restek

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 80 mL/min, Orifice Size: 0.0040in, Material: Stainless Steel

Supplier: Chemglass

Adapter fits into the headplate and has two connections that are 4 mm OØ to fit precision tubing size 16. Inside the reactor, the 4 mm tubes are 1.25" long.

Supplier: Restek

Capillary columns are easier to install due to the nut protruding farther from the insulated injection port chamber.

Supplier: Restek

Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.

Supplier: Chemglass

Male Luer lock with needleless injection site and swabable polycarbonate, silicone with lach samplers for bioreactors.

Supplier: Trajan Scientific and Medical

Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. SGE brings technology and chromatography expertise to improve your chromatography. SGE manufactures an array of connection types for GC use. Poorly defined or selected connections can lead to an increase in dead volume, leaks from cycled temperatures and mismatched tubing sizes.

Supplier: Restek

Made of clear anodized aluminum and high-quality stainless steel. One-piece design for ease of installation and removal.

Supplier: Restek

For use with split/splitless injectors on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL.

Supplier: Restek

Silicone or glass capillary column caps can be attached to the column in seconds to form an airtight seal.

Supplier: BIOPTECHS INC.

The Stable "Z"® Nikon Stage Adapter is a 108 mm round glass plate with an electronically heated metal plate in its center to fit a Nikon microscope stage where biological specimens are placed for observation.

Supplier: Restek

Use micropacked inlet conversion kits to convert capillary GC split/splitless inlets for use with ¹/₁₆" OD micropacked columns.

Supplier: BIOPTECHS INC.

The FCS2® Cooling Adapter is an O-Ring sealed window that circulates an isolated cooled fluid over the upper glass element (Microaqueduct slide) to cool the specimen to desired temperature

Supplier: Colder Products

NSH Series couplings are general purpose versions of our pressure-balanced, non-spill, ChemQuik® CQG couplings. Their non-spill design virtually eliminates spills, minimizes downtime and enhances operator safety in a very low-cost package.

Supplier: Thermo Fisher Scientific

Nalgene Replacement coupling inserts support one handed connection and disconnection when applied to mating couple bodies

Supplier: Restek

Fluid resistor technology eliminates adjustments to capillary tubing for optimizing split ratio. Wide range of interchangeable resistors available.

Supplier: Optimize

OPTI-LOK LP Fittings are an excellent choice for making low-pressure connections into ¹/₄-28 ports. Connections to flat-bottomed ports can be made using OPTI-LOK flat-bottomed ferrules for ¹/₁₆ or ¹/₈" tubing without the need for pre-flanged tubing ends. OPTI-LOK LP Fittings are precision machined to deliver leak-free, zero-dead-volume connections every time. We also offer ¹/₄-28 unions in various through-hole sizes for joining flat-bottom fittings.

Supplier: Chemglass

Universal vent port assembly is constructed of 316 L electro polished stainless steel. These port assemblies fit all types of spinner flasks, media bottles and vessels. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.

Supplier: Optimize

Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.

Supplier: Edwards

Used for connecting flexible vacuum tubing to pumping systems

Supplier: Edwards

ISO size NW10 aluminum elbow, 90[degree].

Supplier: SANISURE, INC. LO

These compliant, biocompatible fittings provide assurance, integrity, and cost-effective solutions.

Supplier: SANISURE, INC. LO

These compliant, biocompatible fittings provide assurance, integrity, and cost-effective solutions.