You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Fused Silica Y-Shaped Union, Ohio Valley
Supplier: Ohio Valley
Features linear tapers of a minimum angle, 1:1 split ratio, narrow angle between output legs for less column strain and low dead-volume
Expand 1 Items
Reducers, Welch®, Gardner Denver
Supplier: Welch Vacuum
Used to mate two different sizes of ISO flanges
Expand 2 Items
PEEK Luer Adapters, 1-Way, Cadence Science®
Supplier: Cadence Science
Made of inert PEEK and designed for quick, leak-proof connections.
Expand 7 Items
Septum Nuts for use with Split/Splitless Injectors, Restek
Supplier: Restek
Septum nuts are for use with Agilent 5890/6850/6890/7890 split/splitless injectors.
Expand 2 Items
Vaplock™ Tubing Connections, Cole-Parmer
Supplier: Argos Technologies
Liquid-tight tubing connections for 1/4-28 and 5/16-24 ports.
Expand 8 Items
Valco® Adapter Ferrules, ¹/₁₆", Restek
Supplier: Restek
Fused silica adapter ferrules are made from Valcon polyimide, a unique, graphite-reinforced composite specially prepared to maximize mechanical stability at temperatures up to 350°C.
Expand 4 Items
OPTI-LOK™ Low Pressure Fittings
Supplier: Optimize
OPTI-LOK LP Fittings are an excellent choice for making low-pressure connections into ¹/₄-28 ports. Connections to flat-bottomed ports can be made using OPTI-LOK flat-bottomed ferrules for ¹/₁₆ or ¹/₈" tubing without the need for pre-flanged tubing ends. OPTI-LOK LP Fittings are precision machined to deliver leak-free, zero-dead-volume connections every time. We also offer ¹/₄-28 unions in various through-hole sizes for joining flat-bottom fittings.
Expand 24 Items
SilFlow™ Gas Chromatography Fittings, Trajan Scientific and Medical
Supplier: Trajan Scientific and Medical
SGE understands today’s chromatographers need to move from tubing based flow systems to planar microchannel systems to deliver flexible chromatography solutions
Expand 26 Items
MPC Series Plastic Couplings, Colder Products Company
Supplier: Colder Products
Couplings allow rapid disconnect and reconnect with one hand and without the need for tools
Expand 8 Items
KIMBLE® Chromatography Adapter with Luer to Hose Barb, DWK Life Sciences
Supplier: DWK Life Sciences (KIMBLE)
Adapters are designed for use in chromatography applications with a luer to hose barb connection.
Expand 2 Items
Vaplock™ Barbed Tubing Connections, Cole-Parmer
Supplier: Argos Technologies
Barbed fittings are an economical means of connecting soft-wall tubing to manifold ports.
Expand 14 Items
Adapters, Air Inlets/Outlets, for Bioreactors, Chemglass
Supplier: Chemglass
Adapters, air inlets/outlets, overlay aeration, for bioreactors.
Expand 3 Items
Objective Thermal Isolators, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
These 9 mm thick internally and externally threaded polymer rings are to be placed between an objective and nosepiece to inhibit thermal conductivity.
Expand 3 Items
Ferrules for Micropacked Columns, Compact—for Agilent 5890/6850/6890/7890 GCs, Restek
Supplier: Restek
Ferrules are designed for use with micropacked columns in Agilent 5890/6850/6890/7890 GCs
Expand 2 Items
FCS2® Low Dead Volume Top Adapter, Bioptechs Inc.®
Supplier: BIOPTECHS INC.
The white, top portion of a FCS2® that is equipped with 0.5 mm I.D
Expand 1 Items
Male Pipe to Valco® Internal Adapter, Restek
Supplier: Restek
These adapters make a minimum-volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.
Expand 2 Items
GC Ferrules, Graphite, Trajan Scientific and Medical
Supplier: Trajan Scientific and Medical
Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. SGE brings technology and chromatography expertise to improve your chromatography. SGE manufactures an array of connection types for GC use. Poorly defined or selected connections can lead to an increase in dead volume, leaks from cycled temperatures and mismatched tubing sizes.
Expand 36 Items
PTV Inlet Adapter Kit for Gerstel CIS 3 and CIS 4 PTV Inlets, Restek
Supplier: Restek
PTV inlet adapter kits are suitable for 0.25 mm and 0.32 mm ID columns.
Expand 1 Items
Extended Capillary Column Nuts for Agilent 5890/6850/6890/7890 GCs, Restek
Supplier: Restek
Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.
Expand 5 Items
EXP® Hand-Tight Coupler (EXP® Reusable Fittings for HPLC and UHPLC for 10-32 fittings and ¹/₁₆" tubing), Restek
Supplier: Restek
Restek is pleased to offer the reusable EXP® fitting system from Optimize Technologies for the ultimate in easy, reliable LC connections.
Expand 1 Items
Micropacked Inlet Conversion Kits, Restek
Supplier: Restek
Use micropacked inlet conversion kits to convert capillary GC split/splitless inlets for use with 1/16" OD micropacked columns.
Expand 4 Items
2-Port Vent Assembly, Straight, GL 45, Universal, 316L Electro Polished Stainless Steel, Chemglass
Supplier: Chemglass
Universal vent port assembly is constructed of 316 L electro polished stainless steel. These port assemblies fit all types of spinner flasks, media bottles and vessels. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.
Expand 1 Items
Vacuum Hose Nozzles, Edwards
Supplier: Edwards
Used for connecting flexible vacuum tubing to pumping systems
Expand 2 Items
EXP®2 Fitting Kits for Stainless Steel Tubing
Supplier: Optimize
Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.
Expand 6 Items
Elbows, Aluminum, Edwards
Supplier: Edwards
ISO size NW10 aluminum elbow, 90[degree].