You searched for: Manifolds
These sampling manifolds are available in a variety of different configurations and various lengths. Almost all manifolds are fabricated from borosilicate glass, and a range of port options allow flexibility in a number of samples and connection locations. Some models allow for rapid purging of gas for releasing pressure or creating a vacuum. Stopcocks have metering groove cuts in the plug to provide fine control of vacuum sources and inert gases.
Vacuum Manifolds, PTFE Stopcocks, with Hose Connections, ChemScience, SATI International Scientific
Supplier: CHEM SCIENCE INC CA
Teflon* Stopcocks, Hose Connection At Both Ends, Nuber of Ports 6, Stopcock Bore 4mm, CS/1General purpose manifold with 2mm or 4mm Teflon* stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at both ends.
Expand 12 Items
Synthware Manifold, Solvent Transfer
Supplier: Kemtech America
Supplied with a high vacuum valve with a PTFE O-ring at the tip and PTFE wiper to protect Viton® O-ring on the shaft.
Expand 1 Items
Oil-Free Vacuum/Pressure Station, Restek
Supplier: Restek
The oil-free vacuum/pressure station allows switching from pressure to vacuum in a matter of seconds.
Expand 1 Items
Airfree® Schlenk Solvent Transfer Manifolds, Chemglass
Supplier: Chemglass
Designed to purify and transfer solvents under inert conditions.
Expand 1 Items
Vacuum Manifold, Single, with #15 O-Ring Joints, Chemscience, SATI International Scientific
Supplier: CHEM SCIENCE INC CA
These manifolds are equipped with an adapter from #15 O-ring joints to serrated hose connections.
Expand 1 Items
Vacuum Manifolds, High Vacuum Valves, with Hose Connections, Chemscience, SATI International Scientific
Supplier: CHEM SCIENCE INC CA
These vacuum manifolds have a 0 to 4 mm stopcock bore.
Expand 9 Items
Vacuum Manifold, Chemglass
Supplier: Chemglass
Vaccum lines constructed using 0.4 mm Chem-Vac™ Chem-Cap® valves, has 4 ports with greased glass stopcocks.
Expand 1 Items
Manifolds, Nitrogen Argon Line, PTFE, Chemscience, SATI International Scientific
Supplier: CHEM SCIENCE INC CA
These manifolds have a 14/20 outer joint at the center to fit a rubber septum for keeping syringes under an inert environment cutting down on the number used.
Expand 6 Items
Vacuum Manifolds, Inert Gas, Double, All Glass, Chemscience, SATI International Scientific
Supplier: CHEM SCIENCE INC CA
These manifolds are delivered with 4 mm double oblique, high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug.
Expand 18 Items
4-Way Collector (The Werner), SCAT
Supplier: SCAT AMERICAS, INC.
This purging manifold allows you to install up to four SafetyCaps on your purging bottle.
Expand 1 Items
Well Plate Vacuum Manifolds, Agilent Technologies
Supplier: AGILENT TECHNOLOGIES, INC (CSD) CA
Well Plate Vacuum Manifolds, Agilent Technologies
Expand 1 Items
Vac Elut SPS 24 Manifold, Agilent Technologies
Supplier: AGILENT TECHNOLOGIES, INC (CSD) CA
Vac Elut 24 SPS manifold processes up to 24 SPE cartridges at the same time.