You searched for: Microscopy and staining reagents

Supplier: Genetex

The PAP pen is a special marking pen that provides a thin film-like green-tinged hydrophobic barrier when a circle is drawn around a specimen on a slide

Supplier: Cargille Laboratories

Types A and B are virtually interchangeable and are miscible with each other for intermediate viscosities. Produced in larger quantities than other types. Type A, at 150 centistokes, reduces any tendancy to trap air. Type B, at 1250 centistokes, is thick enough for viewing multiple slides with one application.

Supplier: Electron Microscopy Sciences

A wide tipped pen designed for use with frozen sections

Supplier: Mortech Manufacturing

Amplify is a fixative spray usually applied after the application of Harmony dyes, although it can also be applied to tissue prior to marking with dyes.

Supplier: Electron Microscopy Sciences

Formaldehyde/zinc fixative is ready-to-use solution. Can be used with automated tissue processors.

Supplier: Electron Microscopy Sciences

Bouin's fixative is used on biopsy specimens of the gastrointestinal tract.

Supplier: CANCER DIAGNOSTICS, INC.

The Endure Staining System is designed to produce precise, consistent H&E staining.

Supplier: Chemplex

Converts powdered samples into a slurry to eliminate segregation by size or density during comminution process.

Supplier: Electron Microscopy Sciences

Premixed, prebuffered fixatives, that are pH adjusted for immediate laboratory use.

Supplier: Electron Microscopy Sciences

Premixed, prebuffered fixatives, that are pH adjusted for immediate laboratory use. They are freshly prepared upon receipt of order to ensure maximum shelf life. The fixatives are filled in 20 mL glass vials (10 mL/vial). This allows for the immediate fixation of your specimens without costly and time consuming transfer associated with ampoule contained fixatives.

Supplier: Mortech Manufacturing

Mopec’s Formaway green liquid formalin neutralizer quickly and effectively neutralizes spent formalin for sewer disposal. Simply add 32 ounces of Formaway green to each gallon of 10% neutral buffered formalin waste and allow to stand for at least 4 hours before disposing.

Supplier: Mortech Manufacturing

Mopec’s Formaway Formalin Neutralizing Absorbent Pad (F-NAP) was designed to reduce formaldehyde vapors while dissecting tissue, transferring tissue from containers of formalin, and transporting or storing tissue in containers of formalin, by absorbing and neutralizing formalin.

Supplier: Electron Microscopy Sciences

This mounting medium is made with limonene, a natural product from orange peels. It preserves  tissues and cell smears that can be dehydrated with organic solvents in immunohistochemistry, e.g. DAB and DAB with nickel or cobalt.

Supplier: Cargille Laboratories

Essential for Sharp Resolution at High Magnification

Supplier: Electron Microscopy Sciences

A dry temporary adhesive film, 0.003" thick, which can be easily cut to size with either a razor or scissor. This mount permits pre-placement of the adhesive film exactly where the user wants it. It melts at 195-210°F. After application it can be dissolved rapidly in trichloroethylene or toluene. This material is particularly useful in applications where a pre-formed adhesive film is needed to assure uniform bonding and flatness or in bonding stacks of substrates such as LCD glass slides for slicing. Sheet size 8"x10".

Supplier: Electron Microscopy Sciences

Citifluor™ mountant media containing antifadents solutions reduce the photo-bleaching or fading of the fluorescence of dyes used for labeling biological species.

Supplier: Electron Microscopy Sciences

A water soluble embedding media which is based on Glycol Methacrylate (GMA) plastic embedding. It is intended for use in preparing samples for high resolution microscopes (HRLM). The catalyzed monomer acts as a dehydration and infiltration agent. Therefore, complete dehydration through 100% ethanol is not necessary although recommended for large or dense tissues. Conventional paraffin sections have a greater degree of shrinkage and produce inadequate morphology when compared to JB-4.JB-4 Kit Consists of 800 mL Solution A, 30 mL Solution B, and 12 g Catalyst.

Supplier: Mortech Manufacturing

Applied after a specimen is marked with a dye, Melody is a quick drying fixative spray that forms a protective layer on the marked surface while still allowing the tissue processing reagents to penetrate the tissue. Melody is unique to Mopec and can be used with all dye colors and on all specimen types. The chemistry of pigments, especially those seen in yellow, orange and red tissue marking dyes manufactured by alternative suppliers often suffer during tissue processing protocols.

Supplier: Diagnostic Biosystems

Proper tissue adhesion to the glass slides is critical in the immunostaining process. Improper adhesion of tissue sections can lead to poor quality staining or even loss of tissue sections during the process of immunostaining. White glue, albumen, chromegelatin and poly-L-lysine are used as tissue adhesives.

Supplier: Diagnostic Biosystems

fading agent for fluorescent staining.

Supplier: Diagnostic Biosystems

Elite PAP pen is a special marking pen that provides a thin film-like green-tinged hydrophobic barrier when a circle is drawn around a specimen on a slide. This water repellent barrier keeps staining reagents localized on the tissue sections, prevents mixing of reagents when differentially staining two sections on the same slide, and allows use of less reagents per section. Insoluble in alcohol and acetone, PAP Pen markings can be optionally removed with xylene after the staining procedure is complete.

Supplier: Mortech Manufacturing

Mopec’s Formaway formalin neutralizing powder safely and easily neutralizes spent formalin waste to a non-hazardous and non-toxic solution in only 20 minutes. Contents are emptied directly into 1 gallon of spent 10% Formalin or 4% Glutaldehyde, reducing risk exposure to lab personnel. This unique formula also eliminates drain-clogging polymers.

Supplier: Electron Microscopy Science

A special mounting media for immunofluorescent staining procedures. It is a water soluble, non-fluorescing medium which is well suited for use when the staining procedure has an aqueous final step. It contains 10% polyvinyl alcohol in phosphate buffered glycerol with 0.1% sodium azide as a preservative.

Supplier: Diagnostic Biosystems

Elite mini PAP pen is a special marking pen that provides a thin film-like green-tinged hydrophobic barrier when a circle is drawn around a specimen on a slide. This water repellent barrier keeps staining reagents localized on the tissue sections, prevents mixing of reagents when differentially staining two sections on the same slide, and allows use of less reagents per section.

Supplier: Diagnostic Biosystems

CC/mount is an aqueous mounting medium with a high refractive index. When applied to stained tissue sections, specimens can be permanently mounted without chromogens fading.

Supplier: Thermo Scientific

Pierce silver stain rescue reagent enables removal of undesirable background from unevenly and overly developed silver-stained polyacrylamide electrophoresis gels.

Supplier: Decon Labs

Slide Rite is a highly concentrated, water-soluble spray that forms a lasting protective coating over all types of cytological smears

Supplier: Decon Labs

CitriSolv™ is a d-Limonene-based solvent and clearing agent that can be used as a safe alternative to xylene and ethyl acetate

Supplier: Decon Labs

CitriSolv™ Hybrid is a mixture of d-limonene and hydrocarbon material allowing for the reduction of orange aroma and an increase in flash point.

Supplier: AVANTOR PERFORMANCE MATERIALS US

Decalcifying solution, Krajian. For decalcifying bones.