You searched for: Retort Stands
Retort stands to hold burettes, flasks, and other labware during procedures are available at VWR. Sets include both stainless steel rod and base, constructed of your choice of plastic or cast iron. A polypropylene retort stand is offered for severe corrosive conditions. Bases of cast iron coated with enamel are featured in rectangular, tripod, U-shaped and A-shaped options. Different rod lengths for the support of different diameters of labware are also supplied through VWR, as well as retort rings and clamps.
Eisco Triangular Retort Bases
Supplier: Wards
Cast iron Triangular Retort Stand with center-tapped hole for maximum stability in minimum footprint.
Expand 3 Items
Eisco A-Shaped Retort Bases with Leveling Screws
Supplier: Wards
A-Shaped Base with leveling screws for optimized stability made of chemically-resistant cast iron.
Expand 3 Items
Cassette Sampling Stand, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Sampling stand used to support sampling cassettes at elevated levels
Expand 1 Items
A-Frame Base with Rod
Supplier: Wards
These cast-iron bases have three-point stability on nearly any surface.
Expand 2 Items
Cast Iron Triangular Support Stands with Rods, United Scientific Supplies
Supplier: United Scientific Supplies
Heavy cast-iron triangular bases.
Expand 4 Items
Stamped Steel Support Stands with Rods, United Scientific Supplies
Supplier: United Scientific Supplies
Stamped steel bases, with black enamel finish.
Expand 4 Items
Eisco® Base, Rod, Clamp and Ring Set
Supplier: Wards
Everything you need to get started in the lab is included in this basic classroom set.
Expand 1 Items
Triangular Base and Rod Assembly
Supplier: Wards
Sturdy assembly for all of your laboratory needs.
Expand 2 Items
Stamped Steel Two-Hole Support Stands with Rods, United Scientific Supplies
Supplier: United Scientific Supplies
Tip-free stability for experiments.
Expand 4 Items
Funnel Support
Supplier: Bennett Wood Specialties
Designed to support four funnels, this well made, hardwood support attaches to any 13 mm (1/2" ) diameter rod. The wood is slotted to facilitate insertion and removal of funnels. Complete with metal clamps and aluminum thumb screw. Overall length is 41 cm.
Expand 1 Items
Steel Ring Support Plate
Supplier: Wards
Steel ring support plate with a 3.75" diameter, offers a stable and heat-resistant surface for holding glassware and other lab equipment during heating or chemical reactions.
Expand 1 Items
Hardwood Single Burette Stand
Supplier: Wards
Single burette stand crafted from seasoned hardwood.
Expand 1 Items
Compact Stand for Overhead Stirrers, Caframo
Supplier: Caframo
The compact stand is ideal for a small work space or under a fume hood.
Expand 1 Items
Support Stand for CHEMRxnHUB™ Bench Top Reactors, Chemglass
Supplier: Chemglass
This unique stationary reactor stand is designed to fit into most benchtop hoods
Expand 3 Items
Medical Stands, Lakeside®
Supplier: Lakeside
Infection control, safety and ease-of-use are the design features of the IV stands
Expand 9 Items
Wood Funnel Support, Bennett Wood
Supplier: Bennett Wood Specialties
Designed to hold six separatory funnels
Expand 1 Items
Hoffman Electrolysis Metal Stand
Supplier: Wards
Measuring 24" in overall height, this metal stand with support clamps provides stability and versatility for Hoffman electrolysis experiments.
Expand 1 Items
Support Extension, Glas-Col®, LLC
Supplier: Glas-Col
Table top support for rounded bottom fabric mantles.
Expand 3 Items
Holder for Rugged Rotator, Glassware Variety, Glas-Col
Supplier: Glas-Col
Used with the Rugged Rotator for rotating and assortment of glassware.
Expand 1 Items
Angled Bottle Rest, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Bottle Rest is ideal for use with a variety of pipets and pipetters, both manual and electronic.
Expand 1 Items
Funnel Support
Supplier: Humboldt Manufacturing
Featuring slotted holes for four funnels, it is constructed of hardwood with a metal clamp and thumbscrew for attaching it to a support rod.
Expand 1 Items
Small Cylinder Stand, Restek
Supplier: Restek
This cylinder stand is designed to support small-diameter cylinders, such as 104 L and 110 L disposable cylinders.
Expand 1 Items
Cast Iron Support Stands with Rods, United Scientific Supplies
Supplier: United Scientific Supplies
Tip-free stability for experiments.
Expand 4 Items
Support Stands with Rods, United Scientific Supplies
Supplier: United Scientific Supplies
All-in-one support design.
Expand 3 Items
Mighty Scope Cradle Stand, Aven Inc.
Supplier: Aven Tools
Cradle stand includes base unit with two insert adaptors providing three “hands free” fixed working distance and magnification options. Ideal for collectors, hobbyists, and graphic artists, as well as in the home and classroom.
Expand 1 Items
Holder for Bench Top Reciprocating Shaker, Centrifuge Tube, Glas-Col
Supplier: Glas-Col
This centrifuge tubes holder will mount for vertical shaking to let the gases escape or horizontally with stoppers secured by a plate.
Expand 2 Items
Holder for Rugged Rotator, 10 to 30 mm Test Tubes, Glas-Col
Supplier: Glas-Col
Used with the Rugged Rotator for blood agitation, isotopic competitive protein binding assays and similar procedures.
Expand 1 Items
Lattice Support Shelf, Chemglass
Supplier: Chemglass
This shelf can be attached to any lattice setup clamp holder.
Expand 1 Items
Deluxe Metalware Kit
Supplier: United Scientific Supplies
This deluxe set includes a support stand with a cast iron base (5×8") with steel support rod (20"), steel support ring (3"), a 2-prong extension clamp with cork lined jaws, and an aluminum clamp holder. The support rod includes a 3" long rod to provide more torque when securing the rod to the base plate.
Expand 1 Items
Funnel Support
Supplier: United Scientific Supplies
Hold funnels from 76 to 152 mm in diameter. Each support also comes with an extra disc that will allow you to support funnels as small as 25 mm and a tapered wedge that ensures a firm grip on support rods either 9 or 13 mm in diameter.