You searched for: Tube Racks

Supplier: Bel-Art Products, a Part of SP

The most versatile tube holder on the market, this set-up takes just seconds and gives users the choice of creating a 15 mL or a 50 mL tube holder.

Supplier: DWK Life Sciences (KIMBLE)

This 25-position tube rack accommodates tubes ranging in sizes from 10 to 17mm.

Supplier: Bel-Art Products, a Part of SP

Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50 mL conical centrifuge tube.

Supplier: Bel-Art Products, a Part of SP

Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and for use in cell culture laboratories.

Supplier: Bel-Art Products, a Part of SP

Designed for high visibility, this 6-place, high-density polyethylene rack is end-supported by two columns.

Supplier: Bel-Art Products, a Part of SP

Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.

Supplier: Bel-Art Products, a Part of SP

Specifically designed for incubating 1.5 mL microcentrifuge tubes, this rack includes a hold-down disk to maintain a constant pressure on the tube caps and prevent them from opening during internal air expansion.

Supplier: Bel-Art Products, a Part of SP

These heavy-duty 3 tier racks are stackable and compact, and have hand grips in the end plates for easy transport.

Supplier: Bel-Art Products, a Part of SP

Designed for preparing and storing 0.2 mL thin-walled PCR tubes and strip tubes before or after PCR sample processing applications.

Supplier: Thermo Fisher Scientific

Nalgene® Polycarbonate Slant Test Tube Racks are useful for incubating liquid cultures on a slant

Supplier: Thermo Fisher Scientific

For incubation at elevated or reduced temperatures in water or ice baths.

Supplier: Bel-Art Products, a Part of SP

Polypropylene rack holds 143 vacuum-type syringe tubes: 80 tubes 12.7 mm (½") O.D. and 63 tubes 16 mm (⅝") O.D. up to 102 mm (4") long.

Supplier: Bel-Art Products, a Part of SP

Molded of steam autoclavable polypropylene, these racks fit 400 mL or 1000 mL beakers.

Supplier: Bel-Art Products, a Part of SP

Unique tabs protect your samples from loss and contamination.

Supplier: Bel-Art Products, a Part of SP

Epoxy-coated steel wire rack holds 15 conical bottom 15 mL centrifuge tubes.

Supplier: Bel-Art Products, a Part of SP

Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited.

Supplier: Bel-Art Products, a Part of SP

Choose from two space-saving rack configurations, as both styles accommodate round and conical bottom tubes.

Supplier: Bel-Art Products, a Part of SP

This innovative, split-frame rack holds up to two different size tubes (10–30 mm) in the same rack and allows users to quickly switch grids to hold other sizes as needed.

Supplier: Bel-Art Products, a Part of SP

Tilt test tube racks to 25°, 35°, or 45°.

Supplier: Beckman Coulter

The 24-place rack allows the use of various-sized glass, polystyrene, polypropylene, and polyallomer tubes, Microfuge® centrifuge tubes, and cryogenic vials

Supplier: Bel-Art Products, a Part of SP

High-quality epoxy-coated wire racks in convenient extra-long sizes for volume test tube work.

Supplier: Hach

Powder coated steel rack holds 25 Hach microbiology MPN tubes

Supplier: Bel-Art Products, a Part of SP

Designed specifically for 5 mL centrifuge tubes, including Eppendorf® brand, this rack will also accommodate other tubes with a diameter of 13–16 mm.

Supplier: Bel-Art Products, a Part of SP

Incubate up to 24 microcentrifuge tubes in a water bath (choose from 1.5 mL or 0.5 mL size).

Supplier: Bel-Art Products, a Part of SP

This all-polypropylene rack provides efficient and extended cooling of twenty-eight 50 mL centrifuge tubes in a chilled bath.

Supplier: Bel-Art Products, a Part of SP

This black epoxy-coated rack holds 30 mm diameter or smaller centrifuge tubes in a 4x6 pattern, allowing 24 tubes per rack.

Supplier: Corning

Microtube racks are available in three sizes and are designed to accommodate microtubes or screw-cap microtubes.
The 48-place aluminium rack holds 48 screw-cap tubes of all sizes. Unique ribbed-port design allows one-hand operation, supported by non-skid benchtop pads for a firm platform. Long-lasting aluminium construction. Centre support for added strength and stability.

Supplier: Thermo Fisher Scientific

Designed to hold 1.5mL microcentrifuge tubes and 1.2 or 2.0mL cryogenic vials

Supplier: Bel-Art Products, a Part of SP

Perfect for benchtop use or freezer storage, this double-sided polypropylene plastic rack accommodates 0.2 ml thin-walled PCR tubes on one side while the opposite side holds 1.5 ml to 2.0 ml microcentrifuge tubes.

Supplier: AGILENT TECHNOLOGIES, INC (CSD) CA

Sample racks & overlays for SPS 4, SPS 3 & ASX 500 autosamplers for AAS, ICP-OES, MP-AES & ICP-MS.