You searched for: Cleanroom Wipes

Supplier: Contec

PROSAT® Sigma™ wipes consist of cellulose/polyester hydroentangled and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. They are ideal for use in life science applications.

Supplier: Contec

These sealed edge wipers with P.A.T.

Supplier: Contec

StatZorb® Wipes are made from polyester fabric with a conductive fiber knitted in a specially designed grid pattern that minimizes 'hot spots'. The antistatic properties are uniform on both sides of the wipe. The surface resistivity is 4.3×107. The static decay time is less than 1.5 seconds.

Supplier: Contec

Meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. PROSAT® presaturated wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: Contec

PROSAT® meltblown polypropylene wipes offer exceptional cleanliness suitable for use in a wide variety of critical environments. Saturated with a solution of 70% USP grade isopropanol and 30% deionized water, the wipes provide a uniform and consistent application of the solution to the surface. PROSAT® PS-911 and PROSAT® PS-850 wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: Contec

These sealed-edge wipers offer an extremely high sorptive capacity and are designed for critical sterile environments.

Supplier: Contec

Manufactured from meltblown polypropylene these PROSAT® presaturated wipes offer exceptional cleanliness. They are low in nonvolatile residues as well as particles and fibers. The use of presaturated wipes provides maximum process control.

Supplier: Contec

SATWipes® SWNW0013 series wipes consist of a roll of (700) 7×9" saturated wipes which are dispensed through a center-pull container.

Supplier: Contec

Made from high-quality, unlaundered 100% continuous filament polyester.

Supplier: Contec

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: Contec

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, and the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric from unraveling. This creates an even more durable fabric with strong edges.

Supplier: Veltek Associates

Process2Wipes are saturated with 70% USP isopropyl alcohol and 30% USP water for injection.

Supplier: Veltek Associates

Wipes saturated with 70% USP isopropyl alcohol and 30% USP water for injection.

Supplier: Veltek Associates

WipeDown HC dry wipers are ultra-clean laundered and suitable for use in cleanroom environments.

Supplier: Foamtec International

These soft, nonabrasive wipers trap particulate matter in a skeletal structure designed to reduce particulate contamination.

Supplier: Veltek Associates

HYPO-CHLOR® saturated wipes are designed for intricate or sensitive locations where a spray down would create residues.

Supplier: Veltek Associates

Steri-Perox® wipes leave no residue and are used for both aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, Lexan, polycarbonate, glass, and any critical surfaces that require cleaning.

Supplier: Foamtec International

This triple-layered wipe is designed to aid decontamination procedures in pharmaceutical and medical device manufacturing facilities.Can hold 8 to 10× the volume of fluid compared to other wipes allowing for much quicker application of cleaning fluids to large areas such as glass windows, stainless steel tanks and piping.

Supplier: Veltek Associates

STER-AHOL® Wipes may be used as a sanitizer in classified manufacturing and testing environments.

Supplier: Foamtec International

Wipers are made from a fully cross-linked, naturally hydrophillic polyurethane foam and laundered with a proprietary process in an ISO Class 4 (FED-STD-209E Class 10/M2.5) environment.

Supplier: High-Tech Conversions

NOVA-TECH™ P Wipes are made from 100% polypropylene and provide an extremely clean and absorbent solution to cleanroom needs.

Supplier: Liberty Industries

These cleanroom wipes are perfect for light to medium duty wiping applications.

Supplier: Berkshire

Pro-Wipe® SE knit are industrial cleanroom wipes made from 100% polyester.

Supplier: Transforming Technologies

Static dissipative cleanroom ESD wipes are suitable for nearly all electronic manufacturing and optical cleaning applications.

Supplier: Berkshire

DuoClean™ wipes provide convenience, consistency, disinfectant and sterilant capabilities for cleaning a wide array of cleanroom surfaces.

Supplier: Berkshire

Pro-Wipe® 750 is a solvent-resistant wipe with exceptional absorbency that makes an excellent upgrade for industrial wipe users. It is composed of a layer of cellulose bonded between two outer layers of polypropylene.

Supplier: Berkshire

Gamma Wipe® Polx® Nonwoven is a 100% polyester hydroentangled nonwoven wiper recommended for ISO Class 5 and above environments.

Supplier: FG CLEAN WIPES TE

Cleanroom wipes, dry

Supplier: High-Tech Conversions

NOVA-COT™ 100% cotton cleanroom wipes are ideal for use in a variety of controlled environments including ISO Class 6 (formerly class 1000) cleanrooms.

Supplier: Berkshire

Durable and low-linting Pro-Wipe® SuperSorb Lite wipes are manufactured from 80% cellulose/10% lyocell/10% bicomponent.