Toluene or methylbenzene is a colorless liquid used as an organic solvent for industrial purposes. High purity toluene suitable for histology and cytology applications, for spectrophotometry and organic residue analysis is available in sealed glass bottles and steel cans. The aromatic hydrocarbon stored in ambient temperature has the smell associated with paint thinners.
Toluene ≥99.8%, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®
Supplier: VWR International
Toluene ≥99.8%, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®
Expand 1 Items
Toluene ≥99.5% ACS, VWR Chemicals BDH®
Supplier: VWR International
Suitable for histology and cytology applications.
Expand 3 Items
Toluene ≥99.8% (by GC, corrected for water content), UltimAR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Supplier: VWR International
Toluene ≥99.8% (by GC, corrected for water content), AR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Expand 1 Items
Toluene ≥99.5%, extremely low particle, CMOS, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Toluene ≥99.5%, extremely low particle, CMOS
Expand 1 Items
Toluene ≥99% (by GC, corrected for water content), Technical Grade
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Toluene ≥99% (by GC, corrected for water content), Technical Grade
Expand 1 Items
Toluene ≥99.5% (by GC), CMOS for microelectronic, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Toluene ≥99.5% (by GC), CMOS for microelectronic, J.T.Baker®
Expand 1 Items
Toluene ≥99.5% (by GC), BAKER ANANYZED™ ACS
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Lot analysis on label.
Expand 6 Items
Toluene ≥99.7% (by GC, corrected for water content), BAKER ULTRA RESI-ANALYZED® for organic residue analysis, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
For organic residue analysis.
Expand 2 Items
Toluene ≥99.5% (by GC), AR® (ACS) ACS analytical reagent, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
ACS—Reagents meeting the requirements of the American Chemical Society Committee on Analytical Reagents. The specifications listed in this catalog are based on the ACS Reagent Chemicals Tenth Edition.
Expand 2 Items
Toluene ≥99.7% (by GC, corrected for water content), BAKER ANALYZED® HPLC for HPLC, UHPLC, for spectrophotometry, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Packaged under nitrogen. For use in high performance liquid chromatography. UV cutoff 285nm. Lot analysis on label.
Expand 3 Items
Toluene ≥99.7% (by GC), ChromAR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Especially intended for use as an HPLC and TLC solvent. Filtered through a 0.2µm element.
Expand 1 Items
Toluene ≥99.9% (by GC), EMSURE® ACS, ISO, Reag. Ph. Eur. for analysis, Supelco®
Supplier: MilliporeSigma
Toluene, Grade:ACS,ISO,Reag. Ph Eur, CAS number:108-88-3, Synonyms:Toluol, Methylbenzene, Application:for analysis EMSUR
Expand 6 Items
Toluene ≥99.9%, OmniSolv®, Supelco®
Supplier: MilliporeSigma
For spectrophotometry, HPLC, gas chromatography, and residue analysis. Filtered through a 0.2µm filter. UV cutoff 285nm. Lot analysis on label.
Expand 3 Items
Toluene ≥99.5% (by GC), GR ACS, Supelco®
Supplier: MilliporeSigma
Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs.
Expand 5 Items
Toluene, anhydrous ≥99.5%, DriSolv®, Supelco®
Supplier: MilliporeSigma
Clear and free of particulates. Suitable for use in organic synthesis and other anhydrous solvent applications.
Elbow adapter with septum cap (EM-692004-2) allows for the removal of solvent under nitrogen atmosphere. Replacement septum (EM-692004S-2), for use with elbow adapter, minimizes air and moisture intrusion once the primary septum is punctured. Drying tube (EM-692010-2) filled with t.h.e.« desiccant indicating silica gel removes solvent under a dry-air atmosphere. Large plug (EM-692012-2) is a replacement plug for bottle top.
Expand 2 Items
Toluene, SupraSolv® for GC-ECD/FID, Supelco®
Supplier: MilliporeSigma
SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.
Expand 3 Items
Toluene ≥99.8%, SupraSolv® for GC-MS, distilled, Supelco®
Supplier: MilliporeSigma
SupraSolv® MS is dedicated for use in gas chromatography coupled with mass spectrometric detection. SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results. This method is used e. g. for the analysis of dioxins and furans (PCDD/PCDF) in food and water samples or for the determination of PAH (polycyclic aromatic hydrocarbons) in food.
Expand 2 Items
Toluene, Uvasol® for spectroscopy, Supelco®
Supplier: MilliporeSigma
Accurate analytic results in UV/VIS and infrared spectroscopy depend on the use of very pure solvents for sample preparation. The Uvasol® solvents range has been specially designed for spectroscopy and other applications requiring solvents of the highest spectral purity. The refinement process allows a greater degree of security in applications and avoids misinterpretation of analytical results caused by traces of UV, IR and fluorescence contamination. Uvasol® solvents offer best UV transmittance. In all specifications the minimum transmittance for 5 typical wavelengths are identified. Furthermore the transmittance is specified in accordance with Reag. Ph Eur and ACS.
Expand 1 Items
Toluene ≥99.9%, BioSyn™ for biosynthesis, for applications requiring low water content, Burdick & Jackson™
Supplier: Burdick & Jackson
Toluene ≥99.9%, BioSyn™ for biosynthesis, for applications requiring low water content, Burdick & Jackson™
Expand 1 Items
Toluene ≥99.8%, B&J Brand™ for HPLC, for spectrophotometry, Burdick & Jackson™
Supplier: Burdick & Jackson
Honeywell Burdick & Jackson B&J Brand Toluene Is A High Purity Solvent Suitable For Hplc And Spectrophotometry. Packaged In 56L Stainless Steel Pressure Dispense System (Sspds) Containers That Are Returned For Refill. Sold Only Under Contract.
Expand 1 Items
Toluene, Epredia™
Supplier: Thermo Scientific
Produced to rigid specifications and packaged in high density polyethylene easy-to-pour bottles to reduce spillage.
Expand 1 Items
Toluene ≥99.9%, CHROMASOLV™ for HPLC, Riedel-de Haën™
Supplier: Honeywell Research Chemicals
Toluene, Grade: CHROMASOLV, for HPLC, Purity: 99.9%, CAS Numbers: 108-88-3, Formula: C6H5-CH3, Size: 1l
Expand 2 Items
Toluene ACS
Supplier: Ricca Chemical
Toluene, ACS Reagent Grade, CAS Number: 108-88-3, Molecular Formula: C6H5CH3, Molecular Weight: 92.13 g/mol, Appearance: Colorless liquid, Odor: Characteristic, model airplane glue, Physical State: Liquid, Size: 4 L amber glass
Expand 2 Items
Toluene saturated with water at 75 ° F, B S & W solvent
Supplier: Ricca Chemical
Toluene saturated with water at 75 ° F, B S & W solvent
Expand 1 Items
Toluene ≥99.8% ACS for organic synthesis, for preparative liquid chromatography, general laboratory use
Supplier: Burdick & Jackson
ACS GENERAL USE SOLVENTS
Expand 3 Items
Toluene ≥99.8%, Environmental Grade
Supplier: Thermo Scientific Chemicals
Suitable for pesticide residue analysis
Expand 3 Items
Toluene ACS
Supplier: INNOVA CHEMICALS CA
Suitable for histology and cytology applications.
Expand 3 Items
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: Ansell Canada
Supplier: Akro-Mils
Supplier: VWR International
Supplier: SCN INDUSTRIAL CA
Supplier: VWR International
Supplier: Kimberly-Clark
Supplier: Medicom