You searched for: Fume Hoods and Enclosures

Supplier: Labconco

Designed to give maximum protection for radiochemical applications.

Supplier: Labconco

High performance fume hoods with integrated sash sensors for automatic multi-speed blower control.

Supplier: Labconco

Fully-featured, energy-efficient fume hood provides an environmentally-friendly solution to ducted fume hoods while simplifying installation.

Supplier: Labconco

Bulk powder enclosures keep airborne particulates and fumes contained during powder transfer operations

Supplier: Labconco

XPert TXE Equipment Enclosures are designed to address the needs of pharmaceutical research and quality control laboratories

Supplier: Labconco

Protector® Downdraft Powder Stations keep users safe by containing powders during fingerprint processing. The open-sided, open-top work station provides unrestricted operator movement and accommodates oversized evidence. Available in 2' and 3' widths, two or more Stations may be placed side-by-side to achieve an unlimited number of width combinations. An optional Transition Connector mounts between two Stations for a secure fit and continuous work surface.

Supplier: Labconco

The patented RXPert Double Filtered Balance System is a Class I Enclosure that meets the USP <800> requirements for non-sterile compounding with NO DUCTWORK! It provides user protection by keeping powders and particulates contained during hazardous drug manipulation

Supplier: Labconco

These systems include an XPert balance enclosure with a Guardian™ Jr

Supplier: Labconco

The Basic™ hood is ideal for rooms with ceilings below 2.4 m, 8" and for shallow countertops.

Supplier: Kewaunee

These modified epoxy resin worktops are available with or without a 5.1cm (2") diameter vent hole

Supplier: Labconco

Guardian Airflow Monitors are designed to continuously monitor airflow through Labconco fume hoods

Supplier: MONASHEE MANUFACTURING CA

Furnace cap hoods are designed to capture the lead fumes from your MAS3 fusion or cupellation furnaces. Designed for fire assay applications, our furnace cap hoods have a 10" flange for connecting to existing duct work and are required to be connected to an appropriately sized dust collector and a scrubber as required (items sold separately, contact us for more information).

Supplier: MONASHEE MANUFACTURING CA

The cupellation hood is designed for the MAS3 furnace and is to be used in conjunction with a furnace cap hood (CA11022-166). The cupellation hood bolts onto the front of the furnace cap hood and effectively collects lead fumes generated by the hot cupels after cupellation.

Supplier: MONASHEE MANUFACTURING CA

Pulverizer hoods effectively capture and collect dust while providing uniform airflow, a clean work surface and protecting the operator from contaminants. Hood can have the option to have your pulverizer placed on the left- or right-hand side to provide a convenient work area for your pulverizer bowls, discs, and sample preparation. Designed for mining applications, our workstation dust hoods have a 10" flange for connecting to existing duct work and are required to be connected to an appropriately sized dust collector (sold separately, contact us for more information).

Supplier: Labconco

Bulk powder systems keep airborne particulates and fumes contained during powder transfer procedures

Supplier: Labconco

Bulk powder stations are designed to protect the user from airborne particulates and fumes generated during powder transfer operations

Supplier: Labconco

Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation. Ideal for oversized equipment.

Supplier: Labconco

Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation.

Supplier: Labconco

Guardian Digital Airflow Monitors alert the operator to low airflow conditions

Supplier: MONASHEE MANUFACTURING CA

The crusher/splitter hoods effectively capture and collect dust while providing uniform airflow, a clean work surface and protecting the operator from contaminants. Hoods can have the option to have your crusher placed on the left- or right-hand side to provide a convenient work area for a sample splitter. Designed for mining applications, our crusher/splitter hoods have a 10" flange for connecting to existing duct work and are required to be connected to an appropriately sized dust collector (sold separately, contact us for more information).

Supplier: MONASHEE MANUFACTURING CA

A six-foot wide dust hood complete with discharge chute. Slagging hoods effectively capture and collect dust while providing uniform airflow, a clean work surface and protecting the operator from contaminants. These slagging hoods have a convenient steel post with a steel pad to hammer your lead buttons to remove the slag. There is also a chute where the slag is deposited for disposal. Designed for industrial and mining applications, our slagging hoods have a 10” flange for connecting to existing duct work and are required to be connected to an appropriately sized dust collector (sold separately, contact us for more information).

Supplier: Labconco

Designed for the needs of histologists and pathologists, these workstations rid the lab of dangerous organic solvent fumes, such as formaldehyde and xylene, and restore clean air

Supplier: Labconco

The durable, stainless steel-lined Protector® Evidence Drying Cabinet provides a secure ventilated area to dry evidence such as clothing and bedding

Supplier: Labconco

The patented RXPert Single Filtered Balance System is a Class I Enclosure that meets the USP<800> requirements for non-sterile compounding

Supplier: Labconco

The CApture™ Portable Fuming System quickly fixes latent fingerprints at the crime scene using microburst or traditional CA fuming methods, while protecting the user from hazardous fumes

Supplier: Labconco

The CApture™ BT is a spacious benchtop Cyanoacrylate (CA) evidence fuming chamber with a durable, easy-to-clean stainless steel liner

Supplier: Labconco

The durable, stainless steel-lined Protector Evidence Drying Cabinet provides a secure ventilated area to dry evidence such as clothing and bedding. The cabinet’s HEPA and carbon filtered exhaust protects personnel from exposure to biohazards while eliminating nuisance odors. The spray nozzle allows the interior to be washed down for easy clean up after the cabinet has been properly disinfected. A built-in water pump aids clean up.

Supplier: Eagle Group

Stainless steel laboratory exhaust canopies are used to exhaust laboratory work spaces.

Supplier: WaterSaver Faucet

Since isotope hoods do not have interior access panels, they require a front load fitting that can be accessed from outside the hood

Supplier: Labconco

IV bar for Logic, mounting hardware and four hangers (two short and two long). Installation required.