You searched for: Wipes

Supplier: Contec

Polywipe Extra Wipes are unlaundered heavyweight polyester knit wipes with knife-cut edges that can be used in less critical applications.

Supplier: Berkshire

All Gamma Wipe® 67 Wipers are gamma irradiated to a 10⁻⁶ Sterility Assurance Level to ensure the high level of cleanliness, abrasion resistance, and chemical compatibility required for cleaning critical sterile processing environments.

Supplier: Contec

Cellulose/polyester non-woven wipes.

Supplier: FG CLEAN WIPES TE

Perfect for on-the-go cleaning and maintenance, these critically clean polyester/cellulose wipes are presaturated with 70% IPA/30% DI water and packaged in convenient canisters. Spring-closed lids help keep wipes from drying out prematurely.

Supplier: Berkshire

DuoClean™ wipes provide convenience, consistency, disinfectant and sterilant capabilities for cleaning a wide array of cleanroom surfaces.

Supplier: Texwipe

Revolve™ wipes, sustainable wipes made for the cleanroom industry, are made from 100% upcycled polyester material with a sealed edge, processed on Texwipe's fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Contec

The SATWipes® C1 with 100% acetone consists of a roll of 6×9" saturated wipes which are dispensed through a convenient center-pull canister that eliminates the need for solvent bottles.

Supplier: Contec

Quiltec® I Wipes offer the highest sorptive capacity of any sealed edge wipe available. They are manufactured using two layers of knitted polyester fabric that are laminated together to form a stronger, more adsorbent wipe. Additional fluid is captured within the quilted pockets between the fabric layers, increasing the sorbent capacity. Quiltec® I have more than twice the adsorbent capacity of a single-layer wipe.

Supplier: Micronova

A pre-moistened cleansing wipe that is gentle enough for the face and that can be used to remove surface soil prior to gloving or sanitizing hands.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: High-Tech Conversions

These wipes are extremely tough, ultra-durable, and absorbent.

Supplier: Contec

PROSAT® Sigma™ wipes consist of cellulose/polyester hydroentangled and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. They are ideal for use in life science applications.

Supplier: Veltek Associates

WipeDown HC dry wipers are ultra-clean laundered and suitable for use in cleanroom environments.

Supplier: VWR International

A range of sponges, made with cleanroom materials, are designed for cleaning small parts, equipment, and other items in production or the lab.

Supplier: Contec

Polywipe-C 'Blue InspectR' wipes are specifically designed to reveal particle contaminants picked-up from wiped surfaces.

Supplier: Veltek Associates

WipeDown is designed as a dry cleaning wipe for use during wipe downs of filling and packaging machinery, stainless steel surfaces, lexan, polycarbonate, glass and any other critical surface that requires cleaning.

Supplier: Contec

Anticon® Sterile 100™ are the sterile version of Anticon 100® HeavyWeight™ wipes. They are made from 100% continuous filament polyester with a double-knit, no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching.

Supplier: Berkshire

SatPax® Polx® non-woven combines Polx non-woven wipers, composed of 100% polyester spunlace, with various saturation levels of isopropyl alcohol and DI water in an easy-to-dispense canister.

Supplier: Advantus

Lint-free wipes made of 100% polyester allow users to clean screens and monitors without streaking.

Supplier: Contec

Amplitude™ Optic wipes are 100% nonwoven cellulose. The wipe consists of long staple fibers which are wet laid in a paper making process to form an extremely clean sheet. It features very low levels of extractables and only moderate particle generation. The wipe has a non-abrasive surface texture. The wipes are both absorbent and optical grade.

Supplier: Contec

Polywipe Light Wipes are unlaundered standard weight interlock knit polyester wipes with knife-cut edges that can be used in less critical applications.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA (polyester/cellulose) pouch wipes are sterile low particulate, non-woven polyester/cellulose wipes impregnated with 70% v/v Isopropyl alcohol blended with Water for Injection (WFI).

Supplier: Contec

Anticon® Gold StandardWeight™ wipes are made from 100% continuous filament polyester with a double-knit, no-run, interlock construction. The proprietary sealed edges reduce the amount of fibers released from the wipe.

Supplier: Contec

Amplitude™ Kappa™ Sterile LE Wipes are made with Sontara® lyocell/polyester blend fabric. These low endotoxin wipes have excellent sorbency and are validated sterile to an SAL of 10⁻⁶.

Supplier: Berkshire

SatPax® 1000 combines Durx® 670 non-woven wipers, composed of a hydroentangled non-woven blend of 55% cellulose and 45% polyester, with various saturation levels of isopropyl alcohol and DI water.

Supplier: Contec

PROSAT® PS-Si Delta™ Wipes feature 100% nonwoven polyester presaturated with a blend of 10% isopropanol and 90% DI water. Designed for the semiconductor industry, the PROSAT® PS-Si Delta™ Wipes are the cleanest nonwoven wipe available. The durable wipe is made from 100% nonwoven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.

Supplier: Transforming Technologies

ESD and cleanroom safe, these static dissipative wipes are perfect for all electronic manufacturing and optical cleaning applications.

Supplier: Berkshire

Choice® SatPax 500 wipes are composed of a hydroentangled nonwoven blend of 60% cellulose and 40% polyester. This pre-wetted format provides a cost-effective and easy-to-use solution versus traditional bulk handling of solvents.

Supplier: Contec

Polynit Wipes are made of 100% knitted textured polyester with knife cut edges for a very soft wipe. The soft edge is ideal for use on surfaces which are vulnerable to scratching.

Supplier: High-Tech Conversions

Synergy is a tough, abrasion resistant, very absorbent, and virtually lint-free cleanroom wipe.