You searched for: Supports
Supports are designed to hold specific-sized samples and equipment for safe reaction testing procedures. With strong construction, the devices act as protective barriers to keep the benchtop surface and handlers safe from intensely heated samples or harsh solvents. Stands will also precisely position the supplies for specific requirements and allow researchers both hands for maximum working efficiency. The supports give employed instruments the stabilization needed for a controlled and accurate analysis.
Laboratory Frames and Supports
Supplier: OHAUS CORP.
Provides secure support for holding glassware at elevated positions.
Expand 2 Items
Rubber Filter Aid, United Scientific Supplies
Supplier: United Scientific Supplies
This molded rubber filter disc is designed to support and seal in place a filter crucible or a funnel in the neck of a filter flask.
Expand 1 Items
Lower Reactor Support, 2 and 5 L Vessel Capacity, PTFE Coated, Chemglass
Supplier: Chemglass
Replacement part for CG-1949-X series CHEMRXHUB™ support stands.
Expand 1 Items
Benchtop Support Stands, Mobile, Chemglass
Supplier: Chemglass
Benchtop support stand is similar to the CG-1950-100, but reactor stand is mobile and is designed to fit into most walk-in hoods.
Expand 1 Items
Shielded Reactor Support Frame, Mobile, Jacketed, 100 L, 400 mm Flange, Chemglass
Supplier: Chemglass
Our innovative Kwik mount reactor support frame is designed to be user friendly.
Expand 1 Items
Lattice Lab System Set #1, United Scientific Supplies
Supplier: United Scientific Supplies
The Lattice Lab System is a lightweight set of aluminum support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported.
Expand 1 Items
Silicone Flask Stand
Supplier: United Scientific Supplies
Hold flasks of all sizes upright without tipping over.
Expand 1 Items
Fume Hood Support Kits
Supplier: OHAUS CORP.
Provides versatile secure support for holding laboratory glassware.
Expand 3 Items
Holder for Nutating Shakers, Erlenmeyer Flask, Glas-Col
Supplier: Glas-Col
Specially designed for our floor model and mid range shakers
Expand 3 Items
Mantle Extension Support, Series M, Glas-Col®
Supplier: Glas-Col
Steel ring with 15.2 cm (6") shank. Gray finish support mantles to 5 L.
Expand 5 Items
Lattice Lab Rod Connector, United Scientific Supplies
Supplier: United Scientific Supplies
This aluminum connector is used to attach two aluminum rods together.
Expand 1 Items
Bumper Guards for Volumetric Flasks
Supplier: United Scientific Supplies
Protect volumetric flasks from accidentally being tipped over.
Expand 5 Items
Support Stands, Stainless Steel, Chemglass
Supplier: Chemglass
Floor style stainless steel support stands.
Expand 1 Items
Ultra Flex Support System
Supplier: OHAUS CORP.
Provides Secure Support for Holding Glassware at Elevated Positions.
Expand 6 Items
Lower Reactor Support for CHEMRXNHUB™ Dual Support Stands, Benchtop Reactors, Chemglass
Supplier: Chemglass
Flask holder
Expand 1 Items
Weighted Beaker/Flask Holder, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
This weighted holder grips the beaker or flask firmly in four flared stainless steel prongs
Expand 2 Items
Support/Holding Rods, PT Sensors, Hot Plate, Chemglass
Supplier: Chemglass
For fastening a temperature sensor/probe with a boss head to the vertical support rod on a hotplate.
Expand 1 Items
Mantle Extension Support, Series O, Glas-Col®
Supplier: Glas-Col
Table-top support holds hemispherical and spherical Series O mantles up to 1L capacity
Expand 5 Items
Vertical Support Rod, Velp, Chemglass
Supplier: Chemglass
Vertical support rod.
Expand 1 Items
Lower Reactor Support for CHEMRXNHUB™ Triple Support Stands, Benchtop Reactors, Chemglass
Supplier: Chemglass
Flask holder
Expand 1 Items
Filter Reactor Support Bases, Chemglass
Supplier: Chemglass
Filter reactor support bases.
Expand 1 Items
Support Rings with Opening, United Scientific Supplies
Supplier: United Scientific Supplies
Easily move separatory funnels wit this open ring design.
Expand 3 Items
Lattice Lab Accessories, United Scientific Supplies
Supplier: United Scientific Supplies
Extend the usefulness of lattice lab sets.
Expand 7 Items
CHEMRXNHUB™ Dual Support Stands, Benchtop Reactors, Chemglass
Supplier: Chemglass
Supports 2 reactors side by side from 300 ml to 5 L. This unique stationary reactor stand is designed to fit into most benchtop hoods.
Expand 1 Items
Lattice Lab System Set #2, United Scientific Supplies
Supplier: United Scientific Supplies
This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long.
Expand 1 Items
Lattice Lab System Set #3, United Scientific Supplies
Supplier: United Scientific Supplies
This Lattice Lab System features an assortment of aluminum rods, including 10 rods that are 48" long.
Expand 1 Items
Walter Crucible Holder, PLASTICOID COMPANY INC
Supplier: Plasticoid
Rubber crucible holder for use with Gooch crucibles, or similar crucibles, in the neck of a standard suction flask.
Expand 1 Items
Stabilizing Rings, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Vinyl coated lead rings which stabilize glassware that is immersed in water baths; reduces tilting and chemical spills.
Expand 5 Items
Flask Stand, United Scientific Supplies
Supplier: United Scientific Supplies
Designed for use with flasks up to 10 l, this polypropylene flask stand is ribbed to safely hold flasks in place.
Expand 1 Items
Holder for Bench Top Reciprocating Shaker, Erlenmeyer Flask, Glas-Col
Supplier: Glas-Col
This flask holder lets you shake one to four Erlenmeyer flasks at one time on our Bench Top Shaker.
Expand 1 Items
Supplier: Honeywell Safety Products
Supplier: SCN INDUSTRIAL CA
Supplier: VWR International
Supplier: 3M
Supplier: 3M
Supplier: VWR International
Supplier: Microflex
Supplier: SCN INDUSTRIAL CA
Supplier: Honeywell Safety Products
Supplier: 3M
Supplier: Brady Worldwide
Supplier: Medicom
Supplier: VWR International