You searched for: Adapters, Joints with Tube Connectors
Adapters have joints with tube connections in various configurations to fit any reaction system. These bent or straight adapters are fabricated from borosilicate glass to provide a leak-proof fit with other glass instruments. Some models are designed for use as a vent or for the introduction of vacuum or pressure, while others have reinforced taper outer joints and hose connections with a stopcock plug. Fitted disk adapters prevent solids from being introduced into the system.
Synthware Vacuum Adapters with Glass Stopcock, Kemtech America
Supplier: Kemtech America
Use this vacuum adapter with glass stopcock for regulating the flow of gases or liquids into reaction systems.
Expand 3 Items
Adapter, Glass Stopcock, Chemglass
Supplier: Chemglass
Used to regulate the flow of gases or liquids into reaction systems.
Expand 1 Items
Chromatography Flow Control Adapters, ChemScience
Supplier: CHEM SCIENCE INC CA
These flow control adapters with standard taper joint has a 0 to 4 mm high vacuum valve with metering tip to adjust air pressure.
Expand 4 Items
Flow Control Adapters, PTFE Metering Stopcock, 90°, Chemglass
Supplier: Chemglass
Used to regulate the flow of gases or liquids into reaction systems.
Expand 2 Items
Synthware Flushing Adapters, Kemtech America
Supplier: Kemtech America
The flushing adapter is used to flush and fill attached vessels.
Expand 2 Items
Synthware Flushing Adapters, Kemtech America
Supplier: Kemtech America
The flushing adapter is used to flush and fill attached vessels.
Expand 3 Items
Flow Control Adapters, 90°, with PTFE Stopcock, Chemglass
Supplier: Chemglass
Used to regulate the flow of gases or liquids into reaction systems.
Expand 3 Items
90° Flow Control Adapters with Fluoropolymer Resin Stopcock, Chemglass
Supplier: Chemglass
This adapter is desgined to regulate the flow of gases or liquids into reaction systems.
Expand 3 Items
Flow Control Adapters, Straight, with PTFE Stopcock, Chemglass
Supplier: Chemglass
Flow control adapters, used to regulate the flow of gases or liquids into reaction systems.
Expand 5 Items
Ground Joints, with Extended Drip Tubes, Chemglass
Supplier: Chemglass
Inner joint with a sealed-on lower tube extending 6" below the grind.
Expand 2 Items
Adapter, Rotary Evaporator Bump Trap, R200 and R205, Chemglass
Supplier: Chemglass
Vapor tube/bump trap adapter is designed to be used with the Buchi® R-200/205 rotary evaporators.
Expand 1 Items
Airfree® Schlenk Adapter, Gas inlet, Chemglass
Supplier: Chemglass
This gas inlet adapter features a 2 mm glass stopcock having a constant pressure retension device.
Expand 4 Items
Flow Control Adapters, Straight, with Glass Stopcock, Chemglass
Supplier: Chemglass
Used to regulate the flow of gases or liquids into reaction systems.
Expand 4 Items
Adapter, Splash Guard, with Fritted Disc, Chemglass
Supplier: Chemglass
The Splash guard adapter with a coarse fritted disc between the lower inner and top outer joint is available with a choice of full or medium length joints and when placed between the distilling flask and column prevents splash-up
Expand 3 Items
Inlet Adapters, Straight, with Hose Connection, Chemglass
Supplier: Chemglass
With serrated hose connection having an O.D. of 10 mm at the largest serration sealed between the top outer and lower inner standard taper joints.
Expand 2 Items
Bottom Drip Adapter for Big Columns, Ace Glass Incorporated
Supplier: Ace Glass
This end-fitting adapter fits large columns with #80 Ace-Thred connections.
Expand 1 Items
Synthware Chromatography Flow Control Adapters, Kemtech America
Supplier: Kemtech America
This adapter is used for chromatography flow control.
Expand 2 Items
Synthware Vacuum Filtration Adapters, Kemtech America
Supplier: Kemtech America
Adapter is used with plain stem Buchner funnels and pluro-stopper.
Expand 3 Items
Synthware Vacuum Adapters, Glass Stopcock, Kemtech America
Supplier: Kemtech America
Vacuum adapters with glass stopcoock are used to regulate the flow of gases or liquids into reaction systems.
Expand 1 Items
Vacuum Filtration Adapters, with PTFE Stopcock, Chemglass
Supplier: Chemglass
Adapter is used for reduced pressure filtrations using plain stem buchner funnels.
Expand 1 Items
Inner Luer Ground Joints, Chemglass
Supplier: Chemglass
Inner joint manufactured to the same specifications found on medical and research syringes.
Expand 3 Items
Adapters, Flow Control, Chromatography, Rodaviss® Joints, Chemglass
Supplier: Chemglass
Flow adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs.
Expand 2 Items
Inlet Adapters, with Hose Connection, Chemglass
Supplier: Chemglass
With a serrated hose connection for vacuum or for the introduction of gases.
Expand 2 Items
Flow Control Adapter, PTFE Stopcock, 90°, Chemglass
Supplier: Chemglass
Flow control adapter, used to regulate the flow of gases or liquids into reaction systems.
Expand 1 Items
Synthware Flow Control Adapters with Metering Stopcock, 90° Angle, Kemtech America
Supplier: Kemtech America
Provides on/off control with the main valve and allows delivery of preset volumes of gases or liquids to reactions using the needle valve.
Expand 3 Items
Airfree® Schlenk Hose Adapters, Chemglass
Supplier: Chemglass
Adapters for use with manifolds such as (80060-120) through (80060-128) to permit port connection to standard rubber hose.
Expand 8 Items
Synthware Vacuum/Inert Gas Adapters, Kemtech America
Supplier: Kemtech America
Use this adapter for vacuum/inert gas applications.
Expand 3 Items
Synthware Outer Joint Adapters with Glass Stopcock, Kemtech America
Supplier: Kemtech America
Use this outer joint adapter with glass stopcock for regulating the input of gases or liquids into reaction systems.
Expand 2 Items
Sampling Adapters, 24/40, Chemglass
Supplier: Chemglass
Sampling adapter for use with a 24/40 outer joint on the reaction kettle lid.
Expand 5 Items
Vacuum Filtration Adapters, Chemglass
Supplier: Chemglass
Adapters are available in two bottom configuations and four top configurations.