You searched for: Adapters, Joints with Tube Connectors

Supplier: Ace Glass

Adapters can be ordered as is or can be modified to meet your application.

Supplier: Ace Glass

This adapter is designed for use with distillation set-ups.

Supplier: Ace Glass

These glass standard taper joint adapters feature a drip tip and right angle tee ground glass tube sidearms.

Supplier: Ace Glass

This bottom outlet valve/adapter is used with big chromatography columns

Supplier: DWK Life Sciences (KIMBLE)

This inlet adapter is ideal for use as a vent, or for the introduction of pressure/vacuum.

Supplier: Ace Glass

Adapters feature either a 90° angled or straight hose connection, with ground [ST] inner joint at bottom and solid PTFE stopcock plug.

Supplier: Ace Glass

This bottom adapter is designed for use with reactor bodies and a PTFE reactor.

Supplier: Ace Glass

Used for Microscale vacuum distillations, especially for use with a spinning band microdistillation column.

Supplier: Ace Glass

Solid, virgin PTFE, standard taper joint inserts are designed for use with flat glass heads.

Supplier: DWK Life Sciences (KIMBLE)

Connecting adapters allow interfacing of Standard Taper ground jointed glassware with threaded microscale components.

Supplier: Ace Glass

These glass adapters are used to connect freeze drying vessels to the rubber valves on Virtis, Labconco, and most other commercially available freeze drying units.

Supplier: Ace Glass

The adjustable bleed adapter is designed to reduce air flow in the air sampling manifold to prevent a pressure drop across the sampling ports.

Supplier: DWK Life Sciences (KIMBLE)

Designed to adapt a variety of tubes, condensers and filters in 14/20 and 24/25–24/40 glassware.

Supplier: SP Industries

Made of borosilicate glass, these adapters have a 90° bend to ⁵/₁₆" O.D. hose connection on top and inner Standard Taper joint on bottom.

Supplier: Ace Glass

Available in two sizes, both featuring an o-ring sealed, greaseless flange with a quick release clamp.

Supplier: Chemglass

Adapters permit the connection of standard laboratory dram vials directly to the vapor tube or bump trap of a rotary evaporator.

Supplier: Ace Glass

Omnifit shutoff adapter with 1/4"-28 male thread and 1/8" PTFE tubing.

Supplier: Ace Glass

The Easy Adapter allows connection of small bore tubing to Ace-Threds without having to turn vessel or tubing when removing adapter from vessel, i.e., Solvent Reservoirs.

Supplier: Kemtech America

Vacuum adapter features a 90° angle hose connection.

Supplier: Chemglass

Connecting inlet adapter.

Supplier: Kemtech America

This flow control adapter is designed for use with chromatography columns with a 24/40 or 45/50 inner Rodaviss® joint.

Supplier: Kemtech America

Use this vacuum adapter with glass stopcock for regulating the flow of gases or liquids into reaction systems.

Supplier: Chemglass

Used to regulate the flow of gases or liquids into reaction systems.

Supplier: CHEM SCIENCE INC CA

These flow control adapters with standard taper joint has a 0 to 4 mm high vacuum valve with metering tip to adjust air pressure.

Supplier: Chemglass

Used to regulate the flow of gases or liquids into reaction systems.

Supplier: Chemglass

Inner joint with a sealed-on lower tube extending 6" below the grind.

Supplier: Chemglass

Vapor tube/bump trap adapter is designed to be used with the Buchi® R-200/205 rotary evaporators.

Supplier: Chemglass

This gas inlet adapter features a 2 mm glass stopcock having a constant pressure retension device.

Supplier: Chemglass

Used to regulate the flow of gases or liquids into reaction systems.

Supplier: Chemglass

The Splash guard adapter with a coarse fritted disc between the lower inner and top outer joint is available with a choice of full or medium length joints and when placed between the distilling flask and column prevents splash-up