Closures
Whether protecting the sample from outside contamination or the workplace from the bottled toxic waste, closures guarantee tight and reliable seals. With a vast cap selection for best compatibility with any container, tailoring to specific contents is possible. Temperature resistant models allow any procedure to be completed safely. Available in different finishes, any sensitive chromatography sample is protected. The caps are easy to close with one hand and come in many colors to assist with identification.
Seals for Wheaton® CompletePAK® Sterile Vials, DWK Life Sciences
Supplier: DWK Life Sciences (KIMBLE)
CompletePAK®, Chromatography vial closure, Sterile blue flip seal
Expand 4 Items
DURAN® GLS 80® High Temperature Screw Caps, DWK Life Sciences
Supplier: DWK Life Sciences (KIMBLE)
The material used is a special compound based on polyarylsulphone. Consequently the chemical, thermal and mechanical properties of the material are noticeably improved and matched to laboratory requirements.
Expand 3 Items
KIMBLE® Magnetic Screw Thread Headspace Vial Caps, DWK Life Sciences
Supplier: DWK Life Sciences (KIMBLE)
Designed to fit 18 mm screw thread headspace vials.
Expand 2 Items
Flip Cap Aluminum Seals, WHEATON®
Supplier: DWK Life Sciences (KIMBLE)
Flip cap seals provide tamper evidence
Expand 2 Items
Cap Strips for Tubes, Molecular Bio Products
Supplier: Thermo Fisher Scientific
Seal tubes tightly for storage
Expand 2 Items
Safety Caps for GL 45 Threads
Supplier: CP Lab Safety
2-Port safety cap deluxe kit, GL45 thread, black outer, ready-to-use with air inlet valve and and ¹/₈" OD tubing adapter. All you need to supply is the ¹/₈" OD tubing and you're ready to work! Create a closed system with GL-45 safety port caps, which seal to a bottle with a secure EPDM O-ring resistant to common HPLC solvents. This cap helps avoid twisted tubing due to its free-spinning collar design. The inner PTFE section will not rotate after the cap is secured. For a closed system, use the adapter with ¹/₈" OD tubing to seal one port and a vent filter in the other to allow for pressure changes and off-gassing.
Expand 1 Items
Caps and Septa for 2.0 ml, 8 mm Screw-Thread Vials, Restek
Supplier: Restek
Preassembled Restek screw caps with open tops are available for creating dependable seals, with 8-millimeter-wide openings.
Expand 2 Items
Screw Caps, Firefly
Supplier: FIREFLYSCI, INC.
Caps are made of polypropylene and are equipped with a poly-vinyl liner.
Expand 2 Items
Port Cap System with 20 L Carboy
Supplier: CP Lab Safety
Port cap system, 20 L Nalgene carboy, 70 mm 10- Port cap, secondary container.
Expand 1 Items
Hub-Cap Filter Kit, Restek
Supplier: Restek
Hub-Cap Filter Kit for 4 L bottles with GL-38 threads.
Expand 1 Items
Outlet Cap & Gold Seal Assembly for Agilent HPLC Systems, Restek
Supplier: Restek
Outlet cap and gold seal assembly for Agilent HPLC systems (models 1050, 1100, 1200, 1220, 1260, 1290).
Expand 1 Items
White Polypropylene Screw Caps, F217 & Fluoropolymer Resin Liner, Qorpak®
Supplier: Qorpak
Polypropylene caps with F217 & Fluoropolymer Resin liners are an economical alternative to Thermoset & Phenolic Fluoropolymer Resin lined caps.
Expand 15 Items
Trigger Sprayer Pump, Polypropylene, White, Qorpak®
Supplier: Qorpak
witch between spray and stream options on this versatile dispensing trigger sprayer closure.
Expand 1 Items
Vaplock™ Nalgene® Supply Caps, 38-430, Cole-Parmer
Supplier: Antyila Scientific
The Vaplock™ closed system design reduces chemical evaporation and exposure to hazardous vapors with Vaplock™ solvent reservoir caps.
Expand 12 Items
VWR® Caps for VWR® 18 mm Screw-Thread Headspace Vials
Supplier: Thermo Scientific
Chromatography vial closure, Magnetic, Magnetic Screw Cap 55A, Septum: White Silicone/Blue PTFE
Expand 1 Items
Phenolic Screw Thread Closure, Kimble Chase
Supplier: DWK Life Sciences (KIMBLE)
Caps have mineral-filled phenolic material to withstand the effects of repeated autoclaving.
Expand 15 Items
#: CA21905-026
: Kimberly-Clark